| Catalog Number | 4ti-0380/C, 4ti-0381 | 4ti-0730, 4ti-0730/B, 4ti-0730/C, 4ti-0730/C/10P, 4ti-0730/G, 4ti-0730/R, 4ti-0730/X, 4ti-OX730C/SBC | 4ti-0500, 4ti-0500/8, 4ti-0500/12 | 4ti-0520, 4ti-0520/122, 4ti-0520/S, 4ti-0522, 4ti-0522/S, 4ti-0521 | 67-63111-10 / 67-63111-50 / 68-53111-10N / 68-53111-50N / 68-53111-50X |
| Description | 4titude polypropylene wells, polycarbonate frame, cut corners A24 and P24; working volume: <30μl, total well capacity: 55μl; designed for use on the Roche LightCycler® 480 with 384 well block. The dimensions of these plates are designed to achieve optimized assay conditions on the 4titude polypropylene wells, polycarbonate frame, cut corners A24 and P24; working volume: <30μl, total well capacity: 55μl; designed for use on the Roche LightCycler® 480 with 384 well block. The dimensions of these plates are designed to achieve optimized assay conditions on the Roche LightCycler® 480, and are in a 384 well format for reaction volumes of up to 30μl. The rigid two-component design eliminates warping and distortion during the PCR process, making it ideal for use with robotic systems. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Stackable
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <30μl working volume, 55μl total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Compatible with Roche LightCycler® 480
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Available as a clear polycarbonate frame with clear polypropylene wells
- Also available with white wells for optimum signal-to-noise ratio when using fluorescent based assays
- Available barcoded upon request
- Combi packs available with qPCR Seal (4ti-0560)
... Read More | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI® instruments. This ABI® Style PCR plate offers the benefits of our 2-component design to ABI® 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI® instruments. This ABI® Style PCR plate offers the benefits of our 2-component design to ABI® standard block users. This design combines the advantages of ultra-thin wall polypropylene tubes for optimum PCR results with a rigid polycarbonate skirt and deck for the highest thermal stability. We recommend this semi-skirted plate for use with ABI® thermal cyclers and sequencers; it can be used directly with ABI® instruments with no adapters necessary. The only case where this is not true is with the ABI Fast Block thermal cyclers; in this case, using our FrameStar Fast Plate is recommended instead. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time quantitative PCR (RT-qPCR) results
- <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Ideal for use with ABI® thermal cyclers & sequencers
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, and black
- Ethylene oxide treated option available for forensic use
- Available barcoded upon request
- Combi packs available (for 4ti-0730/C) with Optically Clear Windowed qPCR Seal (4ti-0565)
... Read More | 4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high 4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high integrity and efficiently prevents sample evaporation. It is recommended for PCR, qPCR, and other optical applications (e.g. fluorescence or colorimetric measurements) as well as sample storage. The PCR Seal is also available in two flexible formats with perforated sheets, to enable tearing into 8 well and 12 well strips, respectively. This allows for sealing of complete 96 well plates, but also individual or multiple divisible plate strips, perfectly complementing these products. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Non-pierceable, please refer to our PCR Foil Seal Strong for a pierceable variant
- Peelable
- Seal integrity range: -20°C to 110°C
- Non-sterile
- Free from DNase, RNase, and human genomic DNA
- Applications: PCR, qPCR
- Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal
- Sheet format: 135 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
- Perforated sheet format: 115 x 100mm, for tearing into 8 well strips
- Perforated sheet format: 137 x 71mm, for tearing into 12 well strips
... Read More | 4titude peelable heat sealing foil; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Peel Heat Seal is a laminate seal compatible with 4titude peelable heat sealing foil; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Peel Heat Seal is a laminate seal compatible with polypropylene plates. It can be removed from polypropylene plates by peeling, even with a plate which has been removed directly from -80°C storage. Peel Heat Seal forms a complete seal to a plate enabling very low temperature uses, including very low temperature storage, and high temperature uses, such as PCR (when used with a pressurized heated lid). The seal demonstrates moderate solvent resistance and can be utilized for short term compound storage at room temperature. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Peelable from polypropylene and COC plates
- Seal integrity range: -80°C to 90°C (110°C when used with pressurized heated lid)
- Good solvent resistance including DMSO
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Suitable for short term room temperature storage
- Suitable for very low temperature storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | FluidX cap carriers enable automated capping of 96-format sample storage tubes, leading to improved process efficiency and allowing batch filling of tubes prior to capping - Suitable automated and manual capping
- Available in 96-format SBS footprint
- For use with external/internal thread tubes
- Available
FluidX cap carriers enable automated capping of 96-format sample storage tubes, leading to improved process efficiency and allowing batch filling of tubes prior to capping - Suitable automated and manual capping
- Available in 96-format SBS footprint
- For use with external/internal thread tubes
- Available empty or pre-filled with caps
Suitable for manual use or for use with Azenta Life Sciences Semi-Automated Screw Cap Decappers/Recappers, Single Channel and IntelliXcap™ Automated Screw Cap Decappers/Recappers. - Enable uncapped tubes to be used immediately and then capped using an automated capping and de-capping system
- When used manually, by transferring caps from the carrier to the tube using a single tube transfer device, the operation becomes faster and the risk of contamination is reduced as cap handling is eliminated
- Available in cases of 10 or 50, empty or pre-filled with low-retention screw caps that can reduce sample loss
... Read More |