| Description | 4titude polypropylene wells, polycarbonate frame, cut corners A24 and P24; working volume: <30μl, total well capacity: 55μl; designed for use on the Roche LightCycler® 480 with 384 well block. The dimensions of these plates are designed to achieve optimized assay conditions on the 4titude polypropylene wells, polycarbonate frame, cut corners A24 and P24; working volume: <30μl, total well capacity: 55μl; designed for use on the Roche LightCycler® 480 with 384 well block. The dimensions of these plates are designed to achieve optimized assay conditions on the Roche LightCycler® 480, and are in a 384 well format for reaction volumes of up to 30μl. The rigid two-component design eliminates warping and distortion during the PCR process, making it ideal for use with robotic systems. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Stackable
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <30μl working volume, 55μl total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Compatible with Roche LightCycler® 480
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Available as a clear polycarbonate frame with clear polypropylene wells
- Also available with white wells for optimum signal-to-noise ratio when using fluorescent based assays
- Available barcoded upon request
- Combi packs available with qPCR Seal (4ti-0560)
... Read More | 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Key Features: - Pierceable
- Peelable
- Resealable
- Seal integrity range: -20°C to 110°C
- Moderate solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for short term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude peelable heat sealing foil with wide material compatibility; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Universal Peel Heat Seal 4titude peelable heat sealing foil with wide material compatibility; suitable for low temperature storage, high temperature uses and PCR Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Universal Peel Heat Seal is a laminate seal compatible with PP, PE, PS, COC and PC plates, providing the highest flexibility in plate material choice. Sample access is possible by peeling from the compatible materials and also by piercing the seal with needles, but not with plastic tips. It is resealable by applying another Universal Peel Heat Seal directly on top of a previously pierced seal. Universal Peel Heat Seal forms a complete seal to a plate enabling low temperature uses as well as high temperature uses, such as PCR (when used with a pressurized heated lid). The seal demonstrates moderate solvent resistance. Use of Universal Peel Heat Seal makes roll changes unnecessary even for customers using different microplate materials, because with minor adjustments of sealing parameters all common microplate materials can be sealed to. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Pierceable with needle, but not with standard pipette tips
- Peelable
- Seal integrity temperature range: -80°C to 90°C (110°C when used with a pressurized heated lid)
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Suitable for low temperature sample storage and high temperature uses, such as PCR
- Compatible with PP, PE, PS, COC and PC plates
- Wide material compatibility allows for high throughput sealing of different plates without the need for roll changes
- Resealable by applying another Universal Peel Heat Seal directly on top of a previously pierced seal
- Sheet format: 125mm x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in two roll dimensions, to suit your choice of automatic heat sealing equipment
... Read More | CoolBox Ice-Free Cooling Workstation systems are bench top cooling workstations that provide sample cooling or freezing without ice, electricity or batteries. Ice-Free Cooling Workstation systems are versatile and accommodate a variety of sample formats and temperatures. The modular design enables CoolBox Ice-Free Cooling Workstation systems are bench top cooling workstations that provide sample cooling or freezing without ice, electricity or batteries. Ice-Free Cooling Workstation systems are versatile and accommodate a variety of sample formats and temperatures. The modular design enables the use of Thermoconductive Rack thermo-conductive sample modules to hold microfuge tubes, cryogenic vials, PCR tubes or plates, and more. Available in single or double capacity. - Ice-free cooling/freezing systems with lid or as open platform
- Fits a choice of Thermoconductive Rack modules
- Small footprint ideal for use in the hood especially in keeping temperature sensitive solutions cold
- CoolBox with lid keeps samples cold for up to 16 hours
- CoolBox with lid keeps samples frozen for up to 8 hours
- Open platform keeps samples cold for up to 4 hours
- The built-in 1-8ºC temperature indicator provides visual assurance of operational temperature while working
... Read More | FluidX 0.8ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
FluidX 0.8ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
- Made from high-quality virgin PP
- Available in 96-well format SBS racks or bulk
- Sealable with screw caps/TPE septum caps
Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications. Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white. ... Read More |
| Applications | PCR, qPCR, NGS | Short Term Room Temperature Storage Applications, Low Temperature Compound Storage in DMSO and Organic Solvents | PCR, Low Temperature Storage Applications | Ideal for use in any application where samples need to remain cold or frozen, suitable for use in hoods | (For research use only) Biobanking, Cryogenic Storage, Cancer Research, Cellular and Molecular Biology, Drug Discovery, Compound Libraries, Reagent Storage, CDMOs |