| Catalog Number | 4ti-1200/P, 4ti-1200/B, 4ti-1200/C, 4ti-1200/G, 4ti-1200/R, 4ti-1200/W, 4ti-1200/X, 4ti-1201 | 4ti-0730, 4ti-0730/B, 4ti-0730/C, 4ti-0730/C/10P, 4ti-0730/G, 4ti-0730/R, 4ti-0730/X, 4ti-OX730C/SBC | 4ti-0720, 4ti-0720/B, 4ti-0720/C, 4ti-0721 | 4ti-0975/RA, 4ti-0975/RA-F, 4ti-0975/RA-F/SBC | 66-1800 / 66-1801 / 66-1802 / 66-0196-01 / 66-0196-02 / 66-0196-03 |
| Description | 4titude 96 well semi-skirted plate, vertically scored, snaps easily into strips of 8 tubes or part plates, cut corner A12; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. Our FrameStar Breakable Vertically PCR Plates, Low 4titude 96 well semi-skirted plate, vertically scored, snaps easily into strips of 8 tubes or part plates, cut corner A12; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. Our FrameStar Breakable Vertically PCR Plates, Low Profile utilize the 2-component design of the FrameStar range, which combines the advantages of thin-walled polypropylene tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. This low profile plate has shorter wells than the standard profile plate (4ti-1000), decreasing the "dead space" between the heated lid of the thermal cycler and the sample. This eliminates condensation on the side wall of the tube, preventing reduction in PCR volume and increasing the efficiency of the reaction. Low profile products are especially recommended for use with reaction volumes below 20μl. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- 2-component design prevents distortion of tube strips
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- Low profile 0.1ml (100μl) working volume, with a 0.2ml (200μl) total well capacity when used with sealing options
- End tabs for easy handling and labeling
- Eliminates strip breakage
- Alphanumeric grid reference to aid well and sample identification
- Rigid PCR plate that can be broken into smaller plate sections
- Fits majority of thermal cyclers
- Compatible with standard multichannel pipette
- Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, black, and white
- Also available as a black frame with white wells for use with optical assays such as qPCR
- Also available as FrameStar Breakable Vertically PCR Plate (0.2ml well capacity option)
- 2D coding option
... Read More | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI® instruments. This ABI® Style PCR plate offers the benefits of our 2-component design to ABI® 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI® instruments. This ABI® Style PCR plate offers the benefits of our 2-component design to ABI® standard block users. This design combines the advantages of ultra-thin wall polypropylene tubes for optimum PCR results with a rigid polycarbonate skirt and deck for the highest thermal stability. We recommend this semi-skirted plate for use with ABI® thermal cyclers and sequencers; it can be used directly with ABI® instruments with no adapters necessary. The only case where this is not true is with the ABI Fast Block thermal cyclers; in this case, using our FrameStar Fast Plate is recommended instead. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time quantitative PCR (RT-qPCR) results
- <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Ideal for use with ABI® thermal cyclers & sequencers
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, and black
- Ethylene oxide treated option available for forensic use
- Available barcoded upon request
- Combi packs available (for 4ti-0730/C) with Optically Clear Windowed qPCR Seal (4ti-0565)
... Read More | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Available with the following frame color options for the clear well variety: purple, blue, and clear
- Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
... Read More | 4titude 96 individual tubes in plate format, low profile, flat bottom 2D coded, 0.1ml clear polypropylene tubes, white rigid polycarbonate frame, linear barcoded, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 well, fully skirted, low profile format with each tube 4titude 96 individual tubes in plate format, low profile, flat bottom 2D coded, 0.1ml clear polypropylene tubes, white rigid polycarbonate frame, linear barcoded, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 well, fully skirted, low profile format with each tube inserted separately into the plate frame, allowing for selection and removal of individual tubes from the plate. Each tube clicks into place in the frame ensuring tubes are secure once inserted. The Individual Access range includes PCR plates with 2D coded flat bottoms for applications that require superior sample tracking. In applications where it is essential for samples to be tracked throughout their processing, e.g. for diagnostic assays on clinical samples, tube labeling is a far safer and reliable method compared to cap or seal labeling (which can be misplaced, damaged or rendered unreadable after piercing). Empty frames are available for tubes to be transferred to. The frames can be re-used multiple times, depending on the application. Sample tubes can be identified by the unique 2D code on the base of the wells, removed from the Individual Access plate quickly and easily, and moved to another Individual Access frame for downstream processing or storage. Quick selection of desired tubes reduces the time needed for the sample plate to be out of the freezer and therefore reduces the chance of other wells defrosting in the meantime. Flat bottom PCR plates can be stacked, allowing for optimal use of freezer space as multiple plates can be housed in the same space as a storage rack. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Individually removable from the rigid frame, while the rest of the tubes can remain in storage, reducing freeze-thawing of the whole plate
- Thin walled tubes are made from PP for optimal results in (q)PCR whilst also being suitable for storage and incubation
- <100μl working volume, <180μl total well capacity
- Rigid polycarbonate frame provides mechanical stability of the plate
- These plates are labeled with linear Code 128-format barcodes to aid identification and traceability for your samples
- Alphanumeric grid reference to aid well and sample identification
- Suitable for small volume sample storage, allowing for optimal use of freezer space as multiple plates can be housed in the same space as a storage rack
- Ideal for use with robotic systems
- Fewer transfer steps as the same tube can be used for microscopy, (q)PCR and storage
- Each tube can be individually heat sealed using the Individual Access Pierce Heat Seal Strong, such as the contents of each tube is left secure from cross contamination and evaporation for storage and transfer
- Each tube can still be separated after sealing
- Also available as a Individual Access optical bottom plate (4ti-0970/RA) with black frame, ideal for microscopy and PCR
- Empty frames are available for tubes to be transferred to; frames can be re-used multiple times, depending on the application
- We also offer customization of the Individual Access Plates such as color coding of the individual wells; please contact an expert for details
- The plate can be sealed in one step using Individual Access Pierce Heat Seal Strong (4ti-05381/RA) on the Semi-Automated Sheet Heat Sealer (using the 59-2005 Individual Access adapter), resulting in individually sealed tubes with pierceable seals to allow for sample access
... Read More | FluidX Cryo Storage Boxes / Racks are specifically aimed at users who have freezer racking set up for Cryo Freeze Boxes, wanting to store sample storage tubes such as the Azenta Life Sciences 1ml and 1.9ml Tri-Coded Sample Tubes. Designed to fit in freezer racking set up for Cryo Freeze Boxes, the FluidX Cryo Storage Boxes / Racks are specifically aimed at users who have freezer racking set up for Cryo Freeze Boxes, wanting to store sample storage tubes such as the Azenta Life Sciences 1ml and 1.9ml Tri-Coded Sample Tubes. Designed to fit in freezer racking set up for Cryo Freeze Boxes, the 9x9, 10x10, and 14x14 Cryo Racks enable ease of access to samples with an open bottom to allow 2D code reading on the Azenta Life Sciences Full Rack Readers. The Cryo Boxes are compatible with a broad range of tube formats, allowing you to store legacy collections and maintain ease of access to your valuable samples. - Available in 9x9, 10x10 and 14x14 array
- Cryo racks can be supplied with a unique 2D barcode identifier which can be read at the same time as the tube 2D barcode, to provide more secure sample tracking
- Open bottom for 2D barcode decoding on Azenta Life Sciences Readers
- Compatible with a number of tubes from Azenta as well as other manufacturers
- Unique identifier on every freeze box, in 1D & 2D format
- Optimizes storage space by increasing sample density
... Read More |