| Description | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H12; working volume: <100μl, total well capacity: 200μl; designed for use on Roche LightCycler® 96 and 480 (with 96 well block). Our FrameStar Roche Style plates are designed to achieve optimized assay 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H12; working volume: <100μl, total well capacity: 200μl; designed for use on Roche LightCycler® 96 and 480 (with 96 well block). Our FrameStar Roche Style plates are designed to achieve optimized assay conditions on the Roche LightCycler® 96 and 480 (with 96 well block). This particular style of plate is in a low profile 96-well format; perfect for reaction volumes of 10-100μl. The wells are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The semi-skirted frame allows for labeling or barcoding. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Compatible with the Roche LightCycler® 96 and 480 (with 96 well block)
- Recommended for low volume PCR
- Ideal for use with robotic systems
- Compatible with standard multichannel pipettes
- Standard plate comes with clear polypropylene wells on a clear polycarbonate frame
- Also available with white wells for optimum signal-to-noise ratio when using fluorescent based assays
- Available barcoded upon request;
- Combi packs available with qPCR Seal (4ti-0560) and (for 4ti-0951) with Optically Clear Windowed qPCR Seal (4ti-0564)
... Read More | 4titude 190μl square wells, V shaped bases, clear polypropylene. This plate is designed for high density sample collection and storage, for a wide array of applications within cell biology, molecular biology and drug discovery. The V shaped wells allow for complete sample retention with 4titude 190μl square wells, V shaped bases, clear polypropylene. This plate is designed for high density sample collection and storage, for a wide array of applications within cell biology, molecular biology and drug discovery. The V shaped wells allow for complete sample retention with pipettes, and are ultra-flat for a completely uniform seal, either with adhesive or heat seals, or with our accompanying silicone sealing mat (4ti-0139). Our plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform. Key Features: - Made from polypropylene, a material with very low biomolecular binding characteristics, a high temperature tolerance and resistance to many standard laboratory chemicals, including DMSO
- Autoclavable
- Free from DNase, RNase, human genomic DNA, and endotoxin
- Conical V-bottoms
- Square wells, to make the best use of space, and to improve mixing
- Alphanumeric grid reference to aid well and sample identification
- SBS footprint
- Clear plate, perfect for storage applications
- Temperature range for use: -80°C to 120°C
- Best for precipitation, centrifugation and small volume recovery due to the conical V bottom, as the liquid gathers at the lowest point of the V for easy pipetting
- Stackable
- Suitable for adhesive and heat sealing
- Non-sterile as standard, sterilization available upon request; contact an expert for details and pricing
- Available barcoded upon request
- A clear silicone sealing mat (4ti-0139) is also available to fit this product, with 384 sections to correspond with the wells of this plate
... Read More | 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Key Features: - Pierceable
- Peelable
- Resealable
- Seal integrity range: -20°C to 110°C
- Moderate solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for short term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | Featuring a novel design, the FluidX 1.6ml Maximum Recovery tube is ideally suited for automated workflows using liquid handling, where more sample can be retrieved due to the unique shaped bottom. The innovative design combines both a ?v? and ?u? shaped bottom, to enable a higher amount of sample Featuring a novel design, the FluidX 1.6ml Maximum Recovery tube is ideally suited for automated workflows using liquid handling, where more sample can be retrieved due to the unique shaped bottom. The innovative design combines both a ?v? and ?u? shaped bottom, to enable a higher amount of sample retrieval, therefore creating a reduction in reagent wastage resulting in cost savings. Azenta Life Sciences tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities. - Unique design with combined ?v? and ?u? shaped bottom
- Sample identification from 1D, 2D and human readable code
- Capability to work with automation, designed for liquid handlers
- Suitable for cryogenic storage
- Made from high-quality virgin PP
- Available in 48-well format SBS racks or bulk
Suitable for use with liquid handling automation, whether reformatting, cherry picking, aliquoting an/or normalization. The 1.6ml Maximum Recovery tube offers unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities. Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. ... Read More | FluidX cap carriers enable automated capping of 96-format sample storage tubes, leading to improved process efficiency and allowing batch filling of tubes prior to capping - Suitable automated and manual capping
- Available in 96-format SBS footprint
- For use with external/internal thread tubes
- Available
FluidX cap carriers enable automated capping of 96-format sample storage tubes, leading to improved process efficiency and allowing batch filling of tubes prior to capping - Suitable automated and manual capping
- Available in 96-format SBS footprint
- For use with external/internal thread tubes
- Available empty or pre-filled with caps
Suitable for manual use or for use with Azenta Life Sciences Semi-Automated Screw Cap Decappers/Recappers, Single Channel and IntelliXcap™ Automated Screw Cap Decappers/Recappers. - Enable uncapped tubes to be used immediately and then capped using an automated capping and de-capping system
- When used manually, by transferring caps from the carrier to the tube using a single tube transfer device, the operation becomes faster and the risk of contamination is reduced as cap handling is eliminated
- Available in cases of 10 or 50, empty or pre-filled with low-retention screw caps that can reduce sample loss
... Read More |
| Applications | PCR, qPCR, NGS | Storage Applications, Collection Plate, Cell Biology Research, Molecular Biology Research, Drug Discovery, NGS | Short Term Room Temperature Storage Applications, Low Temperature Compound Storage in DMSO and Organic Solvents | (For research use only) Liquid Handling workflows, Biobanking, Cryogenic Storage, Cancer Research, Cellular and Molecular Biology, Drug Discovery, Compound Libraries, Reagent Storage, CDMOs | (For research use only) Biobanking, Cryogenic Storage, Cancer Research, Cellular and Molecular Biology, Drug Discovery, Compound Libraries, Reagent Storage, CDMOs |