| Description | 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar Breakable Horizontally and Vertically PCR Plate, Low Profile allow for the most flexible, efficient and cost-effective use of FrameStar PCR plates, ensuring not a single tube is wasted. Our FrameStar Breakable Horizontally and Vertically PCR Plates, Low Profile utilize the 2-component design of the FrameStar range, which combines the advantages of thin-walled polypropylene tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- Low profile, 0.1ml wells, <100μl working volume, with a 200μl total well capacity when used with sealing options
- Plates can be broken up in both 8-strip vertical and 12-strip horizontal directions, resulting in individual strips, part strips, or even individual tubes, giving you the highest range of flexibility
- Breaking a plate is more accurate, more convenient, and safer than cutting it with scissors, as it avoids damaging the sealing rings and contamination of the wells
- Plates can be filled, sealed and separated for storage, processing or distribution
- Easy to break at any temperature
- The plate can be adapted to individual pipetting schemes without the need to waste empty wells
- Separated strips or tubes can be used for the positive control to avoid contamination of the samples
- Compatible with all instruments that fit non-skirted, low profile plates
- NB: In some cases you may have to break off the end tabs for it to fit
- Compatible with standard multichannel pipettes
- Available as a FrameStar Breakable Vertically PCR Plate and FrameStar Breakable Vertically PCR Plate, Low Profile that snap into 8-tube strips or part plates
- Also available as a FrameStar Breakable Horizontally and Vertically PCR Plate
... Read More | 4titude peelable adhesive foil, strong adhesive, high solvent resistance; suitable for long term storage This aluminium foil seal has a chemically resistant silicone adhesive layer to produce a seal with high levels of solvent resistance, including to Dimethyl Sulfoxide (DMSO). For all adhesive seals 4titude peelable adhesive foil, strong adhesive, high solvent resistance; suitable for long term storage This aluminium foil seal has a chemically resistant silicone adhesive layer to produce a seal with high levels of solvent resistance, including to Dimethyl Sulfoxide (DMSO). For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Non-pierceable
- Peelable
- Seal integrity range: -20°C to 80°C
- Free from DNase, RNase, and human genomic DNA
- Applications: long-term plate storage, samples containing <80% Dimethyl Sulfoxide (DMSO) can be stored for up to 5 years
- Removal: this seal will not leave a sticky residue on the plate surface following removal
- Suitable for cutting to fit part plates
- Sheet format: 122 x 80mm, to fit all standard SBS footprint plates, PCR and qPCR plates and part plates, microplates, assay and storage plates
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl; universal non-skirted, low profile plate designed for use on all major thermal cyclers. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, meaning seal integrity is not compromised and less of your sample is lost through evaporation. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Available with the following frame color options for the clear well variety: purple, blue, and clear
- Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
... Read More | 4titude low profile, individually removable 0.1ml polypropylene wells, rigid polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl. 96 Well, fully skirted, low profile format with each tube inserted separately into the plate frame, allowing for selection 4titude low profile, individually removable 0.1ml polypropylene wells, rigid polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 200μl. 96 Well, fully skirted, low profile format with each tube inserted separately into the plate frame, allowing for selection and removal of individual tubes from the plate. Each tube clicks into place in the frame ensuring tubes are secure once inserted. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR. Together with the SBS footprint, this makes the plate suitable for use with robotic systems, ideal for both small to high throughput labs. Empty frames are available for tubes to be transferred to. The frames can be re-used multiple times, depending on the application. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Individually removable from the rigid frame, while the rest of the tubes can remain in storage, reducing freeze-thawing of the whole plate
- Thin walled tubes are made from PP for optimal results in (q)PCR whilst also being suitable for storage and incubation
- <100μl working volume, <200μl total well capacity
- Rigid polycarbonate frame provides mechanical stability of the plate
- Alphanumeric grid reference to aid well and sample identification
- Ideal for use with robotic systems
- Fewer transfer steps as the same tube can be used for both (q)PCR and storage
- Each tube can still be separated after sealing
- Each tube can be individually heat sealed using the Individual Access Pierce Heat Seal Strong, such as the contents of each tube is left secure from cross contamination and evaporation for storage and transfer
- Empty frames are available for tubes to be transferred to; frames can be re-used multiple times, depending on the application
- The plate can be sealed in one step using Individual Access Pierce Heat Seal Strong (4ti-05381/RA) on the Semi-Automated Sheet Heat Sealer (using the 59-2005 Individual Access adapter), resulting in individually sealed tubes with pierceable seals to allow for sample access
- Available barcoded upon request
- We also offer customization of the Individual Access Plates such as color coding of the individual wells; please contact an expert for details
... Read More | A unique PCR tube featuring a patent pending dual-cap mechanism, 2D datamatrix code as well as a human readable identification, allowing for wide-ranging workflow versatility. Innovative features allow for utilization as a consumable suitable for sample collection/transport that can be directly A unique PCR tube featuring a patent pending dual-cap mechanism, 2D datamatrix code as well as a human readable identification, allowing for wide-ranging workflow versatility. Innovative features allow for utilization as a consumable suitable for sample collection/transport that can be directly processed for analysis, ideal for genetic testing workflows. Key Features: - Free from DNase, RNase and human genomic DNA
- Leak tested
- Polypropylene, ultra-thin walled, low DNA binding tubes make for optimum PCR results and mitigation against DNA loss from samples
- Tab on side of cap includes a 2D datamatrix code and human readable number
- Tab on collar of hinged lid makes for quick and secure sample trackingn
- Capability to work with automation, tubes are compatible with 48-format SBS footprint rack, see Ordering Information for part number
- PCR tube with patent pending cap-in-cap design, sample identifiers and automation friendly capabilities offer a flexible, scalable solution
- Hinged lid allows for flexibility for use in manual workflows, alongside mitigating against contamination
- Screw cap using Azenta Life Sciences Acoustic technology enables workflow scale up capabilities and consumable consolidation
... Read More |