| Catalog Number | 4ti-0517, 4ti-0517/ST | 4ti-0785/P, 4ti-0785/B, 4ti-0785/G, 4ti-0785/R, 4ti-0785/X, 4ti-0785/M, 4ti-0785/XW, 4ti-0785/W/2D, 4ti-0785/X/2D, 4ti-0786/P, 4ti-0786/B, 4ti-0786/G, 4ti-0786/R, 4ti-0786/X, 4ti-0786/M, 4ti-0786/XW, 4ti-0786/W/2D, 4ti-0786/X/2D | 4ti-0900/C, 4ti-0901 | 4ti-0730, 4ti-0730/B, 4ti-0730/C, 4ti-0730/C/10P, 4ti-0730/G, 4ti-0730/R, 4ti-0730/X, 4ti-OX730C/SBC | 65-7650 / 65-7651 / 65-7652 / 65-7653 |
| Description | 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange. Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Peelable
- Seal integrity range: -20°C to 40°C
- Gas permeability rate: 8,900m3/m2/day
- Moisture vapor transmission rate (very low): 4,200g/m2/day
- Air porosity: 10 sec/100 cc/im2
- RNase/DNase free
- Application: bacterial and eukaryotic cell culture
- Sheet format: 135 x 80mm
- Available sterile (4ti-0517/ST)
... Read More | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, working volume: <200μl, total well capacity: 300μl; available with either strips of domed or flat optical caps Azenta Life Sciences 8 Well PCR Tube Strips with PC Frame are a 2-component design, combining the 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, working volume: <200μl, total well capacity: 300μl; available with either strips of domed or flat optical caps Azenta Life Sciences 8 Well PCR Tube Strips with PC Frame are a 2-component design, combining the advantages of thin-walled tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Made of polypropylene, for the most efficient heat transfer, as well as an inert surface with low binding capabilities for nucleic acids, proteins and other molecules
- By molding the frame portion in a more rigid polymer, the mechanical stability of the strip has been greatly improved compared with traditional single piece products
- End tabs allow for easy handling and labeling of the strips
- Compatible with the majority of thermal cyclers
- Available with the following frame color options for the clear well variety, for color coding of experiments: purple, blue, green, red, and black
- Also available with white wells in black frames for optical assays such as those used in qPCR, as white wells increase the signal-to-noise ratio by maximizing reflection of light in fluorescent based assays
- Available with either domed cap strips or with flat optically clear caps
- Also available with an off-the-shelf 2D code, offering an endless supply of unique code combinations
... Read More | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <200μl, total well capacity: 300μl; universal semi-skirted plate designed for use on standard thermal cyclers. The rigid FrameStar 2-component design eliminates warping and 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, cut corner H1, working volume: <200μl, total well capacity: 300μl; universal semi-skirted plate designed for use on standard thermal cyclers. The rigid FrameStar 2-component design eliminates warping and distortion during PCR, making it ideal for use with robotic systems. The semi-skirted allows for labeling or barcoding for sample tracking. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
- Cut corner at H1
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Also available with white wells for optimum signal-to-noise ratio when using fluorescent based assays
- Available barcoded upon request
- Similar plate with a cut corner at A12 for use with ABI® thermal cyclers and sequencers available: FrameStar 96 Well Semi-Skirted PCR Plate, ABI® Style
... Read More | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI® instruments. This ABI® Style PCR plate offers the benefits of our 2-component design to ABI® 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI® instruments. This ABI® Style PCR plate offers the benefits of our 2-component design to ABI® standard block users. This design combines the advantages of ultra-thin wall polypropylene tubes for optimum PCR results with a rigid polycarbonate skirt and deck for the highest thermal stability. We recommend this semi-skirted plate for use with ABI® thermal cyclers and sequencers; it can be used directly with ABI® instruments with no adapters necessary. The only case where this is not true is with the ABI Fast Block thermal cyclers; in this case, using our FrameStar Fast Plate is recommended instead. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time quantitative PCR (RT-qPCR) results
- <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Ideal for use with ABI® thermal cyclers & sequencers
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, and black
- Ethylene oxide treated option available for forensic use
- Available barcoded upon request
- Combi packs available (for 4ti-0730/C) with Optically Clear Windowed qPCR Seal (4ti-0565)
... Read More | Featuring a novel design, the FluidX 1.6ml Maximum Recovery tube is ideally suited for automated workflows using liquid handling, where more sample can be retrieved due to the unique shaped bottom. The innovative design combines both a ?v? and ?u? shaped bottom, to enable a higher amount of sample Featuring a novel design, the FluidX 1.6ml Maximum Recovery tube is ideally suited for automated workflows using liquid handling, where more sample can be retrieved due to the unique shaped bottom. The innovative design combines both a ?v? and ?u? shaped bottom, to enable a higher amount of sample retrieval, therefore creating a reduction in reagent wastage resulting in cost savings. Azenta Life Sciences tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities. - Unique design with combined ?v? and ?u? shaped bottom
- Sample identification from 1D, 2D and human readable code
- Capability to work with automation, designed for liquid handlers
- Suitable for cryogenic storage
- Made from high-quality virgin PP
- Available in 48-well format SBS racks or bulk
Suitable for use with liquid handling automation, whether reformatting, cherry picking, aliquoting an/or normalization. The 1.6ml Maximum Recovery tube offers unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities. Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. ... Read More |