Lab Consumables

4titude gas permeable adhesive seal, peelable; suitable for cell culture

Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is

4titude gas permeable adhesive seal, peelable; suitable for cell culture

Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange.

Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502).

Key Features:

• Peelable
• Seal integrity range: -20°C to 40°C
• Gas permeability rate: 8,900m³/m²/day
• Moisture vapor transmission rate (very low): 4,200g/m²/day
• Air porosity: 10 sec/100 cc/im²
• RNase/DNase free
• Application: bacterial and eukaryotic cell culture
• Sheet format: 135 x 80mm
• Available sterile (4ti-0517/ST)

4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, cut corner A12; working volume: <200μl, total well capacity: 300μl; designed for use on all major cyclers, including ABI^® instruments with standard 96 well blocks. Specifically designed to be directly

4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, cut corner A12; working volume: <200μl, total well capacity: 300μl; designed for use on all major cyclers, including ABI^® instruments with standard 96 well blocks. Specifically designed to be directly compatible with all major thermal cyclers, this plate can be used directly in ABI^® 96 well instruments without the need for any adapters. The rigid FrameStar 2-component design eliminates warping and distortion during PCR, making it ideal for use with robotic systems. The semi-skirt allows for labeling or barcoding for sample tracking.

Key Features:

• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
• <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
• Cut corner at A12
• Rigid polycarbonate frame for added mechanical stability
• Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
• Improved seal integrity due to thermal stability of frame
• Alphanumeric grid reference to aid well and sample identification
• Perfect for ABI^® thermal cyclers & sequencers
• Recommended for low volume PCR
• Ideal for use with robotic systems
• Compatible with standard multichannel pipettes
• Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, and black
• Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
• Also available as a clear frame with frosted wells for use with ABI^®/LifeTechnologies^® qPCR instruments
• Ultra-low DNA binding option available (4ti-LB0770/C) for sensitive applications with ultra-low DNA input and for maximum DNA recovery after low temperature storage and high temperature incubation
• Ethylene oxide treated option available (4ti-OX770C/SBC) for forensic use
• Available barcoded upon request

4titude peelable heat sealing foil with wide material compatibility; suitable for low temperature storage, high temperature uses and PCR

Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Universal Peel Heat Seal

4titude peelable heat sealing foil with wide material compatibility; suitable for low temperature storage, high temperature uses and PCR

Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Universal Peel Heat Seal is a laminate seal compatible with PP, PE, PS, COC and PC plates, providing the highest flexibility in plate material choice. Sample access is possible by peeling from the compatible materials and also by piercing the seal with needles, but not with plastic tips. It is resealable by applying another Universal Peel Heat Seal directly on top of a previously pierced seal.

Universal Peel Heat Seal forms a complete seal to a plate enabling low temperature uses as well as high temperature uses, such as PCR (when used with a pressurized heated lid). The seal demonstrates moderate solvent resistance. Use of Universal Peel Heat Seal makes roll changes unnecessary even for customers using different microplate materials, because with minor adjustments of sealing parameters all common microplate materials can be sealed to.

This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer.

Key Features:

• Pierceable with needle, but not with standard pipette tips
• Peelable
• Seal integrity temperature range: -80°C to 90°C (110°C when used with a pressurized heated lid)
• Autoclavable (121°C)
• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Suitable for low temperature sample storage and high temperature uses, such as PCR
• Compatible with PP, PE, PS, COC and PC plates
• Wide material compatibility allows for high throughput sealing of different plates without the need for roll changes
• Resealable by applying another Universal Peel Heat Seal directly on top of a previously pierced seal
• Sheet format: 125mm x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
• Roll format: available in two roll dimensions, to suit your choice of automatic heat sealing equipment

FluidX 0.5ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage

FluidX 0.5ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage
• Made from high-quality virgin PP
• Available in 96-well format SBS racks or bulk
• Sealable with screw caps/TPE septum caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers.

Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications.

Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white.

FluidX 1.9ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage

FluidX 1.9ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage
• Made from high-quality virgin PP
• Available in 48-well format SBS racks or bulk
• Sealable with screw caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers.

Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications.

Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white.