| Description | 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange. Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Peelable
- Seal integrity range: -20°C to 40°C
- Gas permeability rate: 8,900m3/m2/day
- Moisture vapor transmission rate (very low): 4,200g/m2/day
- Air porosity: 10 sec/100 cc/im2
- RNase/DNase free
- Application: bacterial and eukaryotic cell culture
- Sheet format: 135 x 80mm
- Available sterile (4ti-0517/ST)
... Read More | 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Key Features: - Pierceable
- Peelable
- Resealable
- Seal integrity range: -20°C to 110°C
- Moderate solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for short term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar Breakable Horizontally and Vertically PCR Plate, Low Profile allow for the most flexible, efficient and cost-effective use of FrameStar PCR plates, ensuring not a single tube is wasted. Our FrameStar Breakable Horizontally and Vertically PCR Plates, Low Profile utilize the 2-component design of the FrameStar range, which combines the advantages of thin-walled polypropylene tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- Low profile, 0.1ml wells, <100μl working volume, with a 200μl total well capacity when used with sealing options
- Plates can be broken up in both 8-strip vertical and 12-strip horizontal directions, resulting in individual strips, part strips, or even individual tubes, giving you the highest range of flexibility
- Breaking a plate is more accurate, more convenient, and safer than cutting it with scissors, as it avoids damaging the sealing rings and contamination of the wells
- Plates can be filled, sealed and separated for storage, processing or distribution
- Easy to break at any temperature
- The plate can be adapted to individual pipetting schemes without the need to waste empty wells
- Separated strips or tubes can be used for the positive control to avoid contamination of the samples
- Compatible with all instruments that fit non-skirted, low profile plates
- NB: In some cases you may have to break off the end tabs for it to fit
- Compatible with standard multichannel pipettes
- Available as a FrameStar Breakable Vertically PCR Plate and FrameStar Breakable Vertically PCR Plate, Low Profile that snap into 8-tube strips or part plates
- Also available as a FrameStar Breakable Horizontally and Vertically PCR Plate
... Read More | 4titude heavy duty heat sealing foil, peelable; suitable for long term storage, transportation Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Thermal Bond Heat Seal is a heavy duty laminate foil seal suitable 4titude heavy duty heat sealing foil, peelable; suitable for long term storage, transportation Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Thermal Bond Heat Seal is a heavy duty laminate foil seal suitable for providing a very strong, but peelable seal. The seal is compatible with polypropylene plates to provide a high degree of sample protection. It demonstrates very good solvent resistance and can be used for very low temperature compound storage, in DMSO and organic solvents, and long term room temperature storage such that it is recommended as suitable for sample transportation. The seal can be pierced only by using a blade or using the Pierce Plate (4ti-0398). This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Peelable
- Seal integrity range: -200°C to 110°C
- High solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Recommended for PCR, including with water bath thermal cyclers
- Seals polypropylene plates
- Suitable for long term storage and transportation
- Suitable for very low temperature storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | FluidX™ dual-coded, 2D-coded, and tri-coded sample tubes from Azenta offer optimal compatibility with automated systems for tracking, capping, and sample management. These tubes provide a lifelong, secure chain of custody for samples in biobanks, compound libraries, and chemical stores, including FluidX™ dual-coded, 2D-coded, and tri-coded sample tubes from Azenta offer optimal compatibility with automated systems for tracking, capping, and sample management. These tubes provide a lifelong, secure chain of custody for samples in biobanks, compound libraries, and chemical stores, including cryogenic storage. The external thread design offers a superior seal with higher working volume, while the internal thread caps outperform traditional O-ring seals, preventing leaks during freezing. Developed for manual, semi-automated, or fully automated workflows, FluidX tubes provide reliable sample audit traceability across labs and storage locations.... Read More |