Lab Consumables

4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips

Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high

4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips

Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high integrity and efficiently prevents sample evaporation. It is recommended for PCR, qPCR, and other optical applications (e.g. fluorescence or colorimetric measurements) as well as sample storage.

The PCR Seal is also available in two flexible formats with perforated sheets, to enable tearing into 8 well and 12 well strips, respectively. This allows for sealing of complete 96 well plates, but also individual or multiple divisible plate strips, perfectly complementing these products.

For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502).

Key Features:

• Non-pierceable, please refer to our PCR Foil Seal Strong for a pierceable variant
• Peelable
• Seal integrity range: -20°C to 110°C
• Non-sterile
• Free from DNase, RNase, and human genomic DNA
• Applications: PCR, qPCR
• Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal
• Sheet format: 135 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
• Perforated sheet format: 115 x 100mm, for tearing into 8 well strips
• Perforated sheet format: 137 x 71mm, for tearing into 12 well strips

4titude 190μl square wells, V shaped bases, clear polypropylene. This plate is designed for high density sample collection and storage, for a wide array of applications within cell biology, molecular biology and drug discovery. The V shaped wells allow for complete sample retention with

4titude 190μl square wells, V shaped bases, clear polypropylene. This plate is designed for high density sample collection and storage, for a wide array of applications within cell biology, molecular biology and drug discovery. The V shaped wells allow for complete sample retention with pipettes, and are ultra-flat for a completely uniform seal, either with adhesive or heat seals, or with our accompanying silicone sealing mat (4ti-0139).

Our plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform.

Key Features:

• Made from polypropylene, a material with very low biomolecular binding characteristics, a high temperature tolerance and resistance to many standard laboratory chemicals, including DMSO
• Autoclavable
• Free from DNase, RNase, human genomic DNA, and endotoxin
• Conical V-bottoms
• Square wells, to make the best use of space, and to improve mixing
• Alphanumeric grid reference to aid well and sample identification
• SBS footprint
• Clear plate, perfect for storage applications
• Temperature range for use: -80°C to 120°C
• Best for precipitation, centrifugation and small volume recovery due to the conical V bottom, as the liquid gathers at the lowest point of the V for easy pipetting
• Stackable
• Suitable for adhesive and heat sealing
• Non-sterile as standard, sterilization available upon request; contact an expert for details and pricing
• Available barcoded upon request
• A clear silicone sealing mat (4ti-0139) is also available to fit this product, with 384 sections to correspond with the wells of this plate

4titude 190μm clear base imaging microplate, black frame. Optically Clear Tissue Culture Plates have been designed for high content screening (HCS) assays in drug development and related areas. They are also suitable for homogeneous assays, employing fluorescence intensity, FRET and TR-FRET

4titude 190μm clear base imaging microplate, black frame. Optically Clear Tissue Culture Plates have been designed for high content screening (HCS) assays in drug development and related areas. They are also suitable for homogeneous assays, employing fluorescence intensity, FRET and TR-FRET where measurements are bottom-read. The high-quality optical base plate assures the necessary accuracy and consistency for automated high throughput systems, generating optimum signal-to-noise ratios. Using state-of-the-art manufacturing technology, we have developed a product which offers several key advantages to the end user.

Optically Clear Tissue Culture Plates are assembled using unique patented laser welding technology which reduces auto fluorescence and does not inhibit cell growth. Available with 190μm polystyrene base. Available TC treated: our advanced tissue-culture (TC) treatment method evenly coats each well for optimal cell adhesion properties for highest reproducibility between wells, plates and batches.

Key Features:

• Leak free
• Free from DNase, RNase, human genomic DNA, and cyto-toxic
• Optimum signal-to-noise ratios
• Good cell adhesion
• Wicking and bubble formation eliminated
• SBS footprint
• Alphanumeric grid reference
• Recommended for confocal microscopy due to reduced cross-talk and superior base flatness
• Reduced auto fluorescence ensures their suitability for fluorescent assays
• Suitable for assays that measure absorbance in the visible light range (400-900nm wavelengths)
• Suitable for colorimetric assays
• Suitable for homogeneous assays
• Suitable for use in BMG lab tech, Molecular Devices, Promega Glomax and other plate readers
• Suitable for adhesive and heat sealing: our Moisture Barrier Seal 96 (4ti-0516/96) is recommended as it is optically clear and allows repeated imaging without removal, reducing contamination risks
• Available with 190μm polystyrene base
• All plates come sterilized, apart from 4ti-0224
• TC treated option available (4ti-0221)
• Available barcoded upon request

4titude polypropylene wells, polycarbonate frame, cut corners A24 and P24; working volume: <30μl, total well capacity: 55μl; designed for use on the Roche LightCycler^® 480 with 384 well block. The dimensions of these plates are designed to achieve optimized assay conditions on the

4titude polypropylene wells, polycarbonate frame, cut corners A24 and P24; working volume: <30μl, total well capacity: 55μl; designed for use on the Roche LightCycler^® 480 with 384 well block. The dimensions of these plates are designed to achieve optimized assay conditions on the Roche LightCycler^® 480, and are in a 384 well format for reaction volumes of up to 30μl. The rigid two-component design eliminates warping and distortion during the PCR process, making it ideal for use with robotic systems.

Key Features:

• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Stackable
• Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
• <30μl working volume, 55μl total well capacity
• Rigid polycarbonate frame for added mechanical stability
• Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
• Improved seal integrity due to thermal stability of frame
• Alphanumeric grid reference to aid well and sample identification
• Compatible with Roche LightCycler^® 480
• Recommended for low volume PCR
• Compatible with standard multichannel pipettes
• Ideal for use with robotic systems
• Available as a clear polycarbonate frame with clear polypropylene wells
• Also available with white wells for optimum signal-to-noise ratio when using fluorescent based assays
• Available barcoded upon request
• Combi packs available with qPCR Seal (4ti-0560)

FluidX 0.65ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage

FluidX 0.65ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage
• Made from high-quality virgin PP
• Available in 96-well format SBS racks or bulk
• Sealable with screw caps/TPE septum caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers.

Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications.

Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white.