| Catalog Number | 4ti-0500, 4ti-0500/8, 4ti-0500/12 | 4ti-0147, 4ti-LB0147, 4ti-0139 | 4ti-0535, 4ti-0535/122, 4ti-0535/REMP, 4ti-0535/S, 4ti-0537, 4ti-0537/REMP, 4ti-0537/S, 4ti-0536 | 4ti-0770, 4ti-0770/B, 4ti-0770/C, 4ti-0770/C/10P, 4ti-0770/G, 4ti-0770/R, 4ti-0770/X, 4ti-0771, 4ti-0772, 4ti-0772/10P, 4ti-OX770C/SBC, 4ti-LB0770/C | FluidX |
| Description | 4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high 4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high integrity and efficiently prevents sample evaporation. It is recommended for PCR, qPCR, and other optical applications (e.g. fluorescence or colorimetric measurements) as well as sample storage. The PCR Seal is also available in two flexible formats with perforated sheets, to enable tearing into 8 well and 12 well strips, respectively. This allows for sealing of complete 96 well plates, but also individual or multiple divisible plate strips, perfectly complementing these products. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Non-pierceable, please refer to our PCR Foil Seal Strong for a pierceable variant
- Peelable
- Seal integrity range: -20°C to 110°C
- Non-sterile
- Free from DNase, RNase, and human genomic DNA
- Applications: PCR, qPCR
- Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal
- Sheet format: 135 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
- Perforated sheet format: 115 x 100mm, for tearing into 8 well strips
- Perforated sheet format: 137 x 71mm, for tearing into 12 well strips
... Read More | 4titude 190μl square wells, V shaped bases, clear polypropylene. This plate is designed for high density sample collection and storage, for a wide array of applications within cell biology, molecular biology and drug discovery. The V shaped wells allow for complete sample retention with 4titude 190μl square wells, V shaped bases, clear polypropylene. This plate is designed for high density sample collection and storage, for a wide array of applications within cell biology, molecular biology and drug discovery. The V shaped wells allow for complete sample retention with pipettes, and are ultra-flat for a completely uniform seal, either with adhesive or heat seals, or with our accompanying silicone sealing mat (4ti-0139). Our plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform. Key Features: - Made from polypropylene, a material with very low biomolecular binding characteristics, a high temperature tolerance and resistance to many standard laboratory chemicals, including DMSO
- Autoclavable
- Free from DNase, RNase, human genomic DNA, and endotoxin
- Conical V-bottoms
- Square wells, to make the best use of space, and to improve mixing
- Alphanumeric grid reference to aid well and sample identification
- SBS footprint
- Clear plate, perfect for storage applications
- Temperature range for use: -80°C to 120°C
- Best for precipitation, centrifugation and small volume recovery due to the conical V bottom, as the liquid gathers at the lowest point of the V for easy pipetting
- Stackable
- Suitable for adhesive and heat sealing
- Non-sterile as standard, sterilization available upon request; contact an expert for details and pricing
- Available barcoded upon request
- A clear silicone sealing mat (4ti-0139) is also available to fit this product, with 384 sections to correspond with the wells of this plate
... Read More | 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Key Features: - Pierceable
- Peelable
- Resealable
- Seal integrity range: -20°C to 110°C
- Moderate solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for short term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, cut corner A12; working volume: <200μl, total well capacity: 300μl; designed for use on all major cyclers, including ABI® instruments with standard 96 well blocks. Specifically designed to be directly 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame, cut corner A12; working volume: <200μl, total well capacity: 300μl; designed for use on all major cyclers, including ABI® instruments with standard 96 well blocks. Specifically designed to be directly compatible with all major thermal cyclers, this plate can be used directly in ABI® 96 well instruments without the need for any adapters. The rigid FrameStar 2-component design eliminates warping and distortion during PCR, making it ideal for use with robotic systems. The semi-skirt allows for labeling or barcoding for sample tracking. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
- Cut corner at A12
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Perfect for ABI® thermal cyclers & sequencers
- Recommended for low volume PCR
- Ideal for use with robotic systems
- Compatible with standard multichannel pipettes
- Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, and black
- Also available as a black frame with white wells for optimum signal-to-noise ratio when using fluorescent based assays
- Also available as a clear frame with frosted wells for use with ABI®/LifeTechnologies® qPCR instruments
- Ultra-low DNA binding option available (4ti-LB0770/C) for sensitive applications with ultra-low DNA input and for maximum DNA recovery after low temperature storage and high temperature incubation
- Ethylene oxide treated option available (4ti-OX770C/SBC) for forensic use
- Available barcoded upon request
... Read More | FluidX™ dual-coded, 2D-coded, and tri-coded sample tubes from Azenta offer optimal compatibility with automated systems for tracking, capping, and sample management. These tubes provide a lifelong, secure chain of custody for samples in biobanks, compound libraries, and chemical stores, including FluidX™ dual-coded, 2D-coded, and tri-coded sample tubes from Azenta offer optimal compatibility with automated systems for tracking, capping, and sample management. These tubes provide a lifelong, secure chain of custody for samples in biobanks, compound libraries, and chemical stores, including cryogenic storage. The external thread design offers a superior seal with higher working volume, while the internal thread caps outperform traditional O-ring seals, preventing leaks during freezing. Developed for manual, semi-automated, or fully automated workflows, FluidX tubes provide reliable sample audit traceability across labs and storage locations.... Read More |