| Description | 4titude pierceable adhesive aluminum foil, strong adhesive, peelable; suitable for high temperature applications This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high temperature applications due to its effectiveness in 4titude pierceable adhesive aluminum foil, strong adhesive, peelable; suitable for high temperature applications This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high temperature applications due to its effectiveness in preventing sample evaporation. The PCR Foil Seal is pierceable; when pierced, the foil tears in an irregular manner which prevents the formation of a vacuum. It also has perforated end tabs for easy application and removal by peeling. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Pierceable
- Peelable
- Seal integrity range: -40°C to 120°C
- Free from DNase, RNase, and human genomic DNA
- Applications: PCR, incubation, storage
- Suitable for cutting to fit part plates
- Sheet format: 130 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
... Read More | 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange. Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Peelable
- Seal integrity range: -20°C to 40°C
- Gas permeability rate: 8,900m3/m2/day
- Moisture vapor transmission rate (very low): 4,200g/m2/day
- Air porosity: 10 sec/100 cc/im2
- RNase/DNase free
- Application: bacterial and eukaryotic cell culture
- Sheet format: 135 x 80mm
- Available sterile (4ti-0517/ST)
... Read More | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H12, working volume: <100μl, total well capacity: 200μl; designed for use on Roche LightCycler® 96 and 480 (with 96 well block); extra white wells for improved sensitivity in fluorescent assays. Our 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H12, working volume: <100μl, total well capacity: 200μl; designed for use on Roche LightCycler® 96 and 480 (with 96 well block); extra white wells for improved sensitivity in fluorescent assays. Our FrameStar Roche Style plates are designed to achieve optimized assay conditions on the Roche LightCycler® 96 and 480 (with 96 well block). This particular style of plate is in a low profile 96-well format; perfect for reaction volumes of 10-100μl. The wells are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The extra white wells allow for increased sensitivity in fluorescent assays. The semi-skirted frame allows for labeling or barcoding. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Compatible with the Roche LightCycler® 96 and 480 (with 96 well block)
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Plates are available with a clear polycarbonate frame and extra white wells for improved sensitivity when using fluorescent based assays
- Combi packs available with qPCR Seal (4ti-0560)
- Available barcoded upon request
... Read More | 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1; working volume: <100μl, total well capacity: 200μl. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal 4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H1; working volume: <100μl, total well capacity: 200μl. The low profile wells of this plate are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, and makes it ideal for use with robotic systems. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Stackable
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Recommended for low volume PCR
- Ideal for use with robotic systems
- Compatible with standard multichannel pipettes
- Ethylene oxide treated option available (4ti-OX960C/SBC) for forensic use
- Ultra-low DNA binding option available (4ti-LB0960/RIG) for sensitive applications with ultra-low DNA input and for maximum DNA recovery after low temperature storage and high temperature incubation
- Available barcoded upon request
- Clear Polystyrene Lid (4ti-0287) available for 4ti-0960/RIG
... Read More | A unique PCR tube featuring a patent pending dual-cap mechanism, 2D datamatrix code as well as a human readable identification, allowing for wide-ranging workflow versatility. Innovative features allow for utilization as a consumable suitable for sample collection/transport that can be directly A unique PCR tube featuring a patent pending dual-cap mechanism, 2D datamatrix code as well as a human readable identification, allowing for wide-ranging workflow versatility. Innovative features allow for utilization as a consumable suitable for sample collection/transport that can be directly processed for analysis, ideal for genetic testing workflows. Key Features: - Free from DNase, RNase and human genomic DNA
- Leak tested
- Polypropylene, ultra-thin walled, low DNA binding tubes make for optimum PCR results and mitigation against DNA loss from samples
- Tab on side of cap includes a 2D datamatrix code and human readable number
- Tab on collar of hinged lid makes for quick and secure sample trackingn
- Capability to work with automation, tubes are compatible with 48-format SBS footprint rack, see Ordering Information for part number
- PCR tube with patent pending cap-in-cap design, sample identifiers and automation friendly capabilities offer a flexible, scalable solution
- Hinged lid allows for flexibility for use in manual workflows, alongside mitigating against contamination
- Screw cap using Azenta Life Sciences Acoustic technology enables workflow scale up capabilities and consumable consolidation
... Read More |