| Catalog Number | 4ti-0573, 4ti-0573/122, 4ti-0573/S, 4ti-0574, 4ti-0574/S, 4ti-0575 | 4ti-0730, 4ti-0730/B, 4ti-0730/C, 4ti-0730/C/10P, 4ti-0730/G, 4ti-0730/R, 4ti-0730/X, 4ti-OX730C/SBC | 4ti-1400/X | 4ti-1200/P, 4ti-1200/B, 4ti-1200/C, 4ti-1200/G, 4ti-1200/R, 4ti-1200/W, 4ti-1200/X, 4ti-1201 | 4ti-0590, 4ti-0590/100, 4ti-0590/S, 4ti-0592, 4ti-0592/S, 4ti-0591 |
| Description | 4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an 4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an optically clear polymer film forming a permanent seal to polypropylene plates. The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Weld Heat Seal forms a complete seal to a plate, enabling both low and very high temperature uses, including low temperature storage and high temperature incubations. This seal is suitable for PCR/qPCR, even without the use of a pressurized heated lid, and is 100% effective when used in water bath thermal cyclers. The permanent nature of this 100% effective seal renders it suitable for the storage and disposal of hazardous material. Clear Weld Heat Seal demonstrates a good solvent resistance and can be utilized for long term compound storage. Samples can be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Permanent seal
- Difficult to pierce
- Non-peelable
- Seal integrity range: -80°C to 110°C
- DMSO and solvent resistant
- Autoclavable (121°C)*
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Applications: suitable for PCR and qPCR, long term storage, and disposal of hazardous materials
- Seals polypropylene plates
- Compatible with water bath thermal cyclers
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
* Once autoclaved, not recommended for PCR applications. ... Read More | 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI® instruments. This ABI® Style PCR plate offers the benefits of our 2-component design to ABI® 4titude standard profile, 0.2ml polypropylene wells, polycarbonate frame with upstand, cut corner A12, working volume: <200μl, total well capacity: 300μl; designed for use on ABI® instruments. This ABI® Style PCR plate offers the benefits of our 2-component design to ABI® standard block users. This design combines the advantages of ultra-thin wall polypropylene tubes for optimum PCR results with a rigid polycarbonate skirt and deck for the highest thermal stability. We recommend this semi-skirted plate for use with ABI® thermal cyclers and sequencers; it can be used directly with ABI® instruments with no adapters necessary. The only case where this is not true is with the ABI Fast Block thermal cyclers; in this case, using our FrameStar Fast Plate is recommended instead. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time quantitative PCR (RT-qPCR) results
- <0.2ml (200μl) working volume, 0.3ml (300μl) total well capacity
- Rigid polycarbonate frame for added mechanical stability
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Ideal for use with ABI® thermal cyclers & sequencers
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, and black
- Ethylene oxide treated option available for forensic use
- Available barcoded upon request
- Combi packs available (for 4ti-0730/C) with Optically Clear Windowed qPCR Seal (4ti-0565)
... Read More | 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar Breakable Horizontally and Vertically PCR Plate, Low Profile allow for the most flexible, efficient and cost-effective use of FrameStar PCR plates, ensuring not a single tube is wasted. Our FrameStar Breakable Horizontally and Vertically PCR Plates, Low Profile utilize the 2-component design of the FrameStar range, which combines the advantages of thin-walled polypropylene tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- Low profile, 0.1ml wells, <100μl working volume, with a 200μl total well capacity when used with sealing options
- Plates can be broken up in both 8-strip vertical and 12-strip horizontal directions, resulting in individual strips, part strips, or even individual tubes, giving you the highest range of flexibility
- Breaking a plate is more accurate, more convenient, and safer than cutting it with scissors, as it avoids damaging the sealing rings and contamination of the wells
- Plates can be filled, sealed and separated for storage, processing or distribution
- Easy to break at any temperature
- The plate can be adapted to individual pipetting schemes without the need to waste empty wells
- Separated strips or tubes can be used for the positive control to avoid contamination of the samples
- Compatible with all instruments that fit non-skirted, low profile plates
- NB: In some cases you may have to break off the end tabs for it to fit
- Compatible with standard multichannel pipettes
- Available as a FrameStar Breakable Vertically PCR Plate and FrameStar Breakable Vertically PCR Plate, Low Profile that snap into 8-tube strips or part plates
- Also available as a FrameStar Breakable Horizontally and Vertically PCR Plate
... Read More | 4titude 96 well semi-skirted plate, vertically scored, snaps easily into strips of 8 tubes or part plates, cut corner A12; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. Our FrameStar Breakable Vertically PCR Plates, Low 4titude 96 well semi-skirted plate, vertically scored, snaps easily into strips of 8 tubes or part plates, cut corner A12; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. Our FrameStar Breakable Vertically PCR Plates, Low Profile utilize the 2-component design of the FrameStar range, which combines the advantages of thin-walled polypropylene tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. This low profile plate has shorter wells than the standard profile plate (4ti-1000), decreasing the "dead space" between the heated lid of the thermal cycler and the sample. This eliminates condensation on the side wall of the tube, preventing reduction in PCR volume and increasing the efficiency of the reaction. Low profile products are especially recommended for use with reaction volumes below 20μl. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- 2-component design prevents distortion of tube strips
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- Low profile 0.1ml (100μl) working volume, with a 0.2ml (200μl) total well capacity when used with sealing options
- End tabs for easy handling and labeling
- Eliminates strip breakage
- Alphanumeric grid reference to aid well and sample identification
- Rigid PCR plate that can be broken into smaller plate sections
- Fits majority of thermal cyclers
- Compatible with standard multichannel pipette
- Available with the following frame color options for the clear well variety: purple, blue, clear, green, red, black, and white
- Also available as a black frame with white wells for use with optical assays such as qPCR
- Also available as FrameStar Breakable Vertically PCR Plate (0.2ml well capacity option)
- 2D coding option
... Read More | 4titude heavy duty heat sealing foil, peelable; suitable for long term storage, transportation Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Thermal Bond Heat Seal is a heavy duty laminate foil seal suitable 4titude heavy duty heat sealing foil, peelable; suitable for long term storage, transportation Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Thermal Bond Heat Seal is a heavy duty laminate foil seal suitable for providing a very strong, but peelable seal. The seal is compatible with polypropylene plates to provide a high degree of sample protection. It demonstrates very good solvent resistance and can be used for very low temperature compound storage, in DMSO and organic solvents, and long term room temperature storage such that it is recommended as suitable for sample transportation. The seal can be pierced only by using a blade or using the Pierce Plate (4ti-0398). This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Peelable
- Seal integrity range: -200°C to 110°C
- High solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Recommended for PCR, including with water bath thermal cyclers
- Seals polypropylene plates
- Suitable for long term storage and transportation
- Suitable for very low temperature storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More |