| Description | Cell Freezing Containers for controlled-rate alcohol-free cell freezing provide a highly reproducible -1?/minute freezing rate when placed in a -80? freezer, with no alcohol or fluids required. The Cell Freezing Container technology utilizes a thermo-conductive alloy core and highly-insulative outer Cell Freezing Containers for controlled-rate alcohol-free cell freezing provide a highly reproducible -1?/minute freezing rate when placed in a -80? freezer, with no alcohol or fluids required. The Cell Freezing Container technology utilizes a thermo-conductive alloy core and highly-insulative outer material to control the rate of heat removal to provide reproducible cell cryopreservation. The insulative outer housing and thermo-conductive solid state core ensure consistent heat removal to all vials throughout the freezing period. Cell Freezing Containers can replace isopropanol-based freezing containers such as Mr. Frosty by ThermoFisher Scientific and others, which can consume up to 12l per year of IPA and cost hundreds of dollars per unit per year to maintain. - Cost saving as no alcohol or fluids required
- Consistent heat removal through freezing period
- Unbreakable, easy and safe to open when frozen
- Easy and fast vial identification and removal
- Quick reuse time: the containers are ready to use again after 5 minutes
- For use with stem cells, primary cells and cell lines
... Read More | 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange. Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Peelable
- Seal integrity range: -20°C to 40°C
- Gas permeability rate: 8,900m3/m2/day
- Moisture vapor transmission rate (very low): 4,200g/m2/day
- Air porosity: 10 sec/100 cc/im2
- RNase/DNase free
- Application: bacterial and eukaryotic cell culture
- Sheet format: 135 x 80mm
- Available sterile (4ti-0517/ST)
... Read More | 4titude peelable adhesive foil, strong adhesive, high solvent resistance; suitable for long term storage This aluminium foil seal has a chemically resistant silicone adhesive layer to produce a seal with high levels of solvent resistance, including to Dimethyl Sulfoxide (DMSO). For all adhesive seals 4titude peelable adhesive foil, strong adhesive, high solvent resistance; suitable for long term storage This aluminium foil seal has a chemically resistant silicone adhesive layer to produce a seal with high levels of solvent resistance, including to Dimethyl Sulfoxide (DMSO). For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Non-pierceable
- Peelable
- Seal integrity range: -20°C to 80°C
- Free from DNase, RNase, and human genomic DNA
- Applications: long-term plate storage, samples containing <80% Dimethyl Sulfoxide (DMSO) can be stored for up to 5 years
- Removal: this seal will not leave a sticky residue on the plate surface following removal
- Suitable for cutting to fit part plates
- Sheet format: 122 x 80mm, to fit all standard SBS footprint plates, PCR and qPCR plates and part plates, microplates, assay and storage plates
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude pierceable heat sealing foil, 96 individual seals in sheet format, high solvent resistance, resealable; suitable for PCR/storage/shipping Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Individual Access 4titude pierceable heat sealing foil, 96 individual seals in sheet format, high solvent resistance, resealable; suitable for PCR/storage/shipping Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Individual Access Pierce Heat Seal is compatible with polypropylene and polystyrene plates, featuring 96 individual foil seal spots on a removable backing. This seal demonstrates good solvent resistance and can be used for low temperature and room temperature compound storage in DMSO and organic solvents. These seals result in individually sealed tubes, and they can be pierced with a pipette tip manually, or by a liquid handling robot. Individual Access Pierce Heat Seal can be resealed by applying another Individual Access Pierce Seal straight on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Key Features: - 96 individual foil seal spots on a removable backing
- Pierceable
- 4 pin holes for exact positioning in special adapters of the Semi-Automated Sheet Heat Sealer
- Resealable
- Seal integrity range: -20°C to 120°C
- Good solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for long term storage
- Best used in combination with our Individual Access plates
- Sheet format: 127 x 100mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
- Non-sterile as standard; sterilization available upon request
... Read More | Azenta Life Sciences Hinged CryoBoxes feature a patented hinged lid that offers convenience and archival integrity, ensuring IDs and vials remain coordinated. To minimize the risk of separation and contamination the lid is fastened to the base, making it easy to open and close even when frozen. Azenta Life Sciences Hinged CryoBoxes feature a patented hinged lid that offers convenience and archival integrity, ensuring IDs and vials remain coordinated. To minimize the risk of separation and contamination the lid is fastened to the base, making it easy to open and close even when frozen. Feature plastic, adjustable slats that can be moved to accommodate multiple vial sizes. Recommended for use at room temperature, 4°C, -20°C and -80°C. - Lid fastened to the base
- Easy to close/open even when frozen and minimized contamination risk due to patented hinged lid
- Plastic dividers for protection during exposure
- Laminated fiberboard for durability and water resistance
- Grid numbers listed on top, inside and bottom for better tracking
- Different color options for easier tracking
- Recommended for use from room temperature to -80°C
- Hinged CryoBox with Drain Holes suitable at vapor phase LN2
- Adjustable slats can be moved to accommodate multiple vial sizes
... Read More |
| Applications | Suitable for use with Stem cells, including human and mouse embryonic, breast and colon cancer, preadipocytes, progenitor, human endothelial, glioblastoma. Primary cells, including WBCs, human cardiac, muscle, mouse. Cell lines, including CHO, LnCap, HTB77, A549, HeLa. | Cell Culture | Long Term Storage | PCR, Storage Applications | Recommended for sample storage at room temperature, 4°C, -20°C and -80°C |