| Description | Cell Freezing Containers for controlled-rate alcohol-free cell freezing provide a highly reproducible -1?/minute freezing rate when placed in a -80? freezer, with no alcohol or fluids required. The Cell Freezing Container technology utilizes a thermo-conductive alloy core and highly-insulative outer Cell Freezing Containers for controlled-rate alcohol-free cell freezing provide a highly reproducible -1?/minute freezing rate when placed in a -80? freezer, with no alcohol or fluids required. The Cell Freezing Container technology utilizes a thermo-conductive alloy core and highly-insulative outer material to control the rate of heat removal to provide reproducible cell cryopreservation. The insulative outer housing and thermo-conductive solid state core ensure consistent heat removal to all vials throughout the freezing period. Cell Freezing Containers can replace isopropanol-based freezing containers such as Mr. Frosty by ThermoFisher Scientific and others, which can consume up to 12l per year of IPA and cost hundreds of dollars per unit per year to maintain. - Cost saving as no alcohol or fluids required
- Consistent heat removal through freezing period
- Unbreakable, easy and safe to open when frozen
- Easy and fast vial identification and removal
- Quick reuse time: the containers are ready to use again after 5 minutes
- For use with stem cells, primary cells and cell lines
... Read More | 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange. Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Peelable
- Seal integrity range: -20°C to 40°C
- Gas permeability rate: 8,900m3/m2/day
- Moisture vapor transmission rate (very low): 4,200g/m2/day
- Air porosity: 10 sec/100 cc/im2
- RNase/DNase free
- Application: bacterial and eukaryotic cell culture
- Sheet format: 135 x 80mm
- Available sterile (4ti-0517/ST)
... Read More | 4titude pierceable adhesive aluminum foil, strong adhesive, peelable; suitable for high temperature applications This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high temperature applications due to its effectiveness in 4titude pierceable adhesive aluminum foil, strong adhesive, peelable; suitable for high temperature applications This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high temperature applications due to its effectiveness in preventing sample evaporation. The PCR Foil Seal is pierceable; when pierced, the foil tears in an irregular manner which prevents the formation of a vacuum. It also has perforated end tabs for easy application and removal by peeling. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Pierceable
- Peelable
- Seal integrity range: -40°C to 120°C
- Free from DNase, RNase, and human genomic DNA
- Applications: PCR, incubation, storage
- Suitable for cutting to fit part plates
- Sheet format: 130 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
... Read More | 4titude heavy duty heat sealing foil, peelable; suitable for long term storage, transportation Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Thermal Bond Heat Seal is a heavy duty laminate foil seal suitable 4titude heavy duty heat sealing foil, peelable; suitable for long term storage, transportation Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Our Thermal Bond Heat Seal is a heavy duty laminate foil seal suitable for providing a very strong, but peelable seal. The seal is compatible with polypropylene plates to provide a high degree of sample protection. It demonstrates very good solvent resistance and can be used for very low temperature compound storage, in DMSO and organic solvents, and long term room temperature storage such that it is recommended as suitable for sample transportation. The seal can be pierced only by using a blade or using the Pierce Plate (4ti-0398). This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Peelable
- Seal integrity range: -200°C to 110°C
- High solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Recommended for PCR, including with water bath thermal cyclers
- Seals polypropylene plates
- Suitable for long term storage and transportation
- Suitable for very low temperature storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | Azenta Life Sciences Hinged CryoBoxes feature a patented hinged lid that offers convenience and archival integrity, ensuring IDs and vials remain coordinated. To minimize the risk of separation and contamination the lid is fastened to the base, making it easy to open and close even when frozen. Azenta Life Sciences Hinged CryoBoxes feature a patented hinged lid that offers convenience and archival integrity, ensuring IDs and vials remain coordinated. To minimize the risk of separation and contamination the lid is fastened to the base, making it easy to open and close even when frozen. Feature plastic, adjustable slats that can be moved to accommodate multiple vial sizes. Recommended for use at room temperature, 4°C, -20°C and -80°C. - Lid fastened to the base
- Easy to close/open even when frozen and minimized contamination risk due to patented hinged lid
- Plastic dividers for protection during exposure
- Laminated fiberboard for durability and water resistance
- Grid numbers listed on top, inside and bottom for better tracking
- Different color options for easier tracking
- Recommended for use from room temperature to -80°C
- Hinged CryoBox with Drain Holes suitable at vapor phase LN2
- Adjustable slats can be moved to accommodate multiple vial sizes
... Read More |
| Applications | Suitable for use with Stem cells, including human and mouse embryonic, breast and colon cancer, preadipocytes, progenitor, human endothelial, glioblastoma. Primary cells, including WBCs, human cardiac, muscle, mouse. Cell lines, including CHO, LnCap, HTB77, A549, HeLa. | Cell Culture | PCR, Storage Applications, Incubation | PCR, Long Term Low Temperature Storage Applications, Transportation | Recommended for sample storage at room temperature, 4°C, -20°C and -80°C |