| Description | Cell Freezing Containers for controlled-rate alcohol-free cell freezing provide a highly reproducible -1?/minute freezing rate when placed in a -80? freezer, with no alcohol or fluids required. The Cell Freezing Container technology utilizes a thermo-conductive alloy core and highly-insulative outer Cell Freezing Containers for controlled-rate alcohol-free cell freezing provide a highly reproducible -1?/minute freezing rate when placed in a -80? freezer, with no alcohol or fluids required. The Cell Freezing Container technology utilizes a thermo-conductive alloy core and highly-insulative outer material to control the rate of heat removal to provide reproducible cell cryopreservation. The insulative outer housing and thermo-conductive solid state core ensure consistent heat removal to all vials throughout the freezing period. Cell Freezing Containers can replace isopropanol-based freezing containers such as Mr. Frosty by ThermoFisher Scientific and others, which can consume up to 12l per year of IPA and cost hundreds of dollars per unit per year to maintain. - Cost saving as no alcohol or fluids required
- Consistent heat removal through freezing period
- Unbreakable, easy and safe to open when frozen
- Easy and fast vial identification and removal
- Quick reuse time: the containers are ready to use again after 5 minutes
- For use with stem cells, primary cells and cell lines
... Read More | 4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an 4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an optically clear polymer film forming a permanent seal to polypropylene plates. The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Weld Heat Seal forms a complete seal to a plate, enabling both low and very high temperature uses, including low temperature storage and high temperature incubations. This seal is suitable for PCR/qPCR, even without the use of a pressurized heated lid, and is 100% effective when used in water bath thermal cyclers. The permanent nature of this 100% effective seal renders it suitable for the storage and disposal of hazardous material. Clear Weld Heat Seal demonstrates a good solvent resistance and can be utilized for long term compound storage. Samples can be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Permanent seal
- Difficult to pierce
- Non-peelable
- Seal integrity range: -80°C to 110°C
- DMSO and solvent resistant
- Autoclavable (121°C)*
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Applications: suitable for PCR and qPCR, long term storage, and disposal of hazardous materials
- Seals polypropylene plates
- Compatible with water bath thermal cyclers
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
* Once autoclaved, not recommended for PCR applications. ... Read More | 4titude pierceable heat sealing foil, 96 individual seals in sheet format, high solvent resistance, resealable; suitable for PCR/storage/shipping Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Individual Access 4titude pierceable heat sealing foil, 96 individual seals in sheet format, high solvent resistance, resealable; suitable for PCR/storage/shipping Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Individual Access Pierce Heat Seal is compatible with polypropylene and polystyrene plates, featuring 96 individual foil seal spots on a removable backing. This seal demonstrates good solvent resistance and can be used for low temperature and room temperature compound storage in DMSO and organic solvents. These seals result in individually sealed tubes, and they can be pierced with a pipette tip manually, or by a liquid handling robot. Individual Access Pierce Heat Seal can be resealed by applying another Individual Access Pierce Seal straight on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Key Features: - 96 individual foil seal spots on a removable backing
- Pierceable
- 4 pin holes for exact positioning in special adapters of the Semi-Automated Sheet Heat Sealer
- Resealable
- Seal integrity range: -20°C to 120°C
- Good solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for long term storage
- Best used in combination with our Individual Access plates
- Sheet format: 127 x 100mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
- Non-sterile as standard; sterilization available upon request
... Read More | CoolBox Ice-Free Cooling Workstation systems are bench top cooling workstations that provide sample cooling or freezing without ice, electricity or batteries. Ice-Free Cooling Workstation systems are versatile and accommodate a variety of sample formats and temperatures. The modular design enables CoolBox Ice-Free Cooling Workstation systems are bench top cooling workstations that provide sample cooling or freezing without ice, electricity or batteries. Ice-Free Cooling Workstation systems are versatile and accommodate a variety of sample formats and temperatures. The modular design enables the use of Thermoconductive Rack thermo-conductive sample modules to hold microfuge tubes, cryogenic vials, PCR tubes or plates, and more. Available in single or double capacity. - Ice-free cooling/freezing systems with lid or as open platform
- Fits a choice of Thermoconductive Rack modules
- Small footprint ideal for use in the hood especially in keeping temperature sensitive solutions cold
- CoolBox with lid keeps samples cold for up to 16 hours
- CoolBox with lid keeps samples frozen for up to 8 hours
- Open platform keeps samples cold for up to 4 hours
- The built-in 1-8ºC temperature indicator provides visual assurance of operational temperature while working
... Read More | Azenta Life Sciences Hinged CryoBoxes feature a patented hinged lid that offers convenience and archival integrity, ensuring IDs and vials remain coordinated. To minimize the risk of separation and contamination the lid is fastened to the base, making it easy to open and close even when frozen. Azenta Life Sciences Hinged CryoBoxes feature a patented hinged lid that offers convenience and archival integrity, ensuring IDs and vials remain coordinated. To minimize the risk of separation and contamination the lid is fastened to the base, making it easy to open and close even when frozen. Feature plastic, adjustable slats that can be moved to accommodate multiple vial sizes. Recommended for use at room temperature, 4°C, -20°C and -80°C. - Lid fastened to the base
- Easy to close/open even when frozen and minimized contamination risk due to patented hinged lid
- Plastic dividers for protection during exposure
- Laminated fiberboard for durability and water resistance
- Grid numbers listed on top, inside and bottom for better tracking
- Different color options for easier tracking
- Recommended for use from room temperature to -80°C
- Hinged CryoBox with Drain Holes suitable at vapor phase LN2
- Adjustable slats can be moved to accommodate multiple vial sizes
... Read More |
| Applications | Suitable for use with Stem cells, including human and mouse embryonic, breast and colon cancer, preadipocytes, progenitor, human endothelial, glioblastoma. Primary cells, including WBCs, human cardiac, muscle, mouse. Cell lines, including CHO, LnCap, HTB77, A549, HeLa. | PCR, qPCR, Long Term Storage, Disposal of Hazardous Materials | PCR, Storage Applications | Ideal for use in any application where samples need to remain cold or frozen, suitable for use in hoods | Recommended for sample storage at room temperature, 4°C, -20°C and -80°C |