| Catalog Number | Thermoconductive Tube Racks | 4ti-0540, 4ti-0540/80, 4ti-0540/REMP, 4ti-0540/S, 4ti-0542, 4ti-0542/REMP, 4ti-0542/S, 4ti-0541 | 4ti-0573, 4ti-0573/122, 4ti-0573/S, 4ti-0574, 4ti-0574/S, 4ti-0575 | 4ti-0535, 4ti-0535/122, 4ti-0535/REMP, 4ti-0535/S, 4ti-0537, 4ti-0537/REMP, 4ti-0537/S, 4ti-0536 | 4ti-0530, 4ti-0530/122, 4ti-0530/REMP, 4ti-0530/S, 4ti-0532, 4ti-0532/REMP, 4ti-0532/S, 4ti-0531, 4ti-0531/GR |
| Description | Thermoconductive Tube Racks are precision-engineered sample modules manufactured from a novel thermo-conductive alloy material, designed to evenly distribute temperature across all wells providing uniform and consistent temperature to all samples (+/-0.1°C)The modules eliminate variability which Thermoconductive Tube Racks are precision-engineered sample modules manufactured from a novel thermo-conductive alloy material, designed to evenly distribute temperature across all wells providing uniform and consistent temperature to all samples (+/-0.1°C)The modules eliminate variability which originate from tubes placed directly into ice, dry ice, alcohol baths, water baths and other temperature sources. - Ideal for cooling, snap freezing, heating or thawing
- Helps keep samples organized and dry
- All tubes upright and indexed
- Reproducible method
- Removes all problems created by placing sample directly in ice: variable sample temperature, wet labels, contamination risk
On ice - Adapts from ambient (25°C) to <4°c in="" 60-90="">
- Samples and labels stay dry
- Hours of ice cooling without direct ice contact
On dry ice - Adapts from ambient (25°C) to -78°C in approximately 5-7 minutes*
- Eliminates ethanol from snap freezing
- Equal or better freezing rate as compared to direct immersion into dry ice or alcohol slurry
In liquid nitrogen - Adapts from ambient (25°C) to approximately -150°C in approximately 12-14 minutes*
- Vapor barrier protects from ambient air
- No direct contact between samples and LN2
Heat sources - Use with water baths, hot plates, incubators and other heat sources to keep samples warm
*Average cooling rate from room temperature How it Works: Ease of Use: - Thermoconductive Tube Rack on ice: heat from the relatively warmer Thermoconductive Tube Rack module is transferred to cooling source (wet or dry ice, cartridge, LN2) until equilibrium is reached
- Thermoconductive Tube Rack in water bath: heat is transferred from water bath toward relatively cooler Thermoconductive Tube Rack until equilibrium is reached
... Read More | 4titude peelable heat sealing film, optically clear; suitable for qPCR and optical applications Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Heat Seal is an optically clear laminate film forming a 4titude peelable heat sealing film, optically clear; suitable for qPCR and optical applications Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Heat Seal is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates. Samples can also be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Heat Seal forms a complete seal to a plate enabling both low temperature uses, including low temperature storage, and high temperature uses, such as PCR (when used with a pressurized heated lid). This seal demonstrates moderate solvent resistance and can be utilized for short term compound storage at room temperature. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Our sheet seals are inter-leaved with paper sheets to help denote which side is the sealing side and aid removal of one sheet at a time from the pack. For applications requiring high tensile strength (e.g. bead mill applications) please see ourClear Heat Seal Plus. Key Features: - Peelable
- Seal integrity range: -80°C to 80°C (to 110°C with a pressurized heated PCR lid)
- Optically clear
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Applications: imaging, fluorescent detection, and colorimetric assays
- Suitable for PCR and qPCR
- Seals polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an 4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an optically clear polymer film forming a permanent seal to polypropylene plates. The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Weld Heat Seal forms a complete seal to a plate, enabling both low and very high temperature uses, including low temperature storage and high temperature incubations. This seal is suitable for PCR/qPCR, even without the use of a pressurized heated lid, and is 100% effective when used in water bath thermal cyclers. The permanent nature of this 100% effective seal renders it suitable for the storage and disposal of hazardous material. Clear Weld Heat Seal demonstrates a good solvent resistance and can be utilized for long term compound storage. Samples can be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Permanent seal
- Difficult to pierce
- Non-peelable
- Seal integrity range: -80°C to 110°C
- DMSO and solvent resistant
- Autoclavable (121°C)*
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Applications: suitable for PCR and qPCR, long term storage, and disposal of hazardous materials
- Seals polypropylene plates
- Compatible with water bath thermal cyclers
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
* Once autoclaved, not recommended for PCR applications. ... Read More | 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and 4titude aluminum heat sealing foil, resealable, peelable, pierceable; suitable for compound storage, PCR Our Foil Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates moderate solvent resistance and can be used for low temperature compound storage in DMSO and organic solvents and short term room temperature storage. The Foil Heat Seal can be pierced with a pipette tip, manually or by liquid handling robots, or it can be removed by peeling. It can be resealed by applying another Foil Heat Seal directly on top of a previously pierced seal. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. A red stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Key Features: - Pierceable
- Peelable
- Resealable
- Seal integrity range: -20°C to 110°C
- Moderate solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for short term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
... Read More | 4titude pierceable heat sealing foil, high solvent resistance, resealable, suitable for PCR/storage/shipping Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Pierce Heat Seal is compatible with polypropylene and 4titude pierceable heat sealing foil, high solvent resistance, resealable, suitable for PCR/storage/shipping Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Pierce Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates good solvent resistance and can be used for low temperature and room temperature compound storage in DMSO and organic solvents. Pierce Heat Seal can be pierced with a pipette tip manually, or by a liquid handling robot. This seal can be resealed by applying another Pierce Seal straight on top of a previously pierced seal. A blue stripe on the sheet foils clearly indicates the non-sealing surface, for ease of seal orientation and handling. Pierce Heat Seal sheets are also available with a printed grid reference on the non-sealing surface. This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Pierceable
- Resealable
- Seal integrity range: -20°C to 120°C
- Good solvent resistance
- Autoclavable (121°C)
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Seals polypropylene and polystyrene plates
- Suitable for long term storage
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Available with printed grid reference (in sheet format, 4ti-0531/GR)
- Non-sterile as standard; sterilization available upon request
- Custom printing available on request
... Read More |