| Description | 4titude pierceable adhesive aluminum foil, strong adhesive, peelable; suitable for high temperature applications This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high temperature applications due to its effectiveness in 4titude pierceable adhesive aluminum foil, strong adhesive, peelable; suitable for high temperature applications This aluminum foil seal has a strong acrylic adhesive which produces a seal of high integrity. It was developed for PCR and other high temperature applications due to its effectiveness in preventing sample evaporation. The PCR Foil Seal is pierceable; when pierced, the foil tears in an irregular manner which prevents the formation of a vacuum. It also has perforated end tabs for easy application and removal by peeling. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Pierceable
- Peelable
- Seal integrity range: -40°C to 120°C
- Free from DNase, RNase, and human genomic DNA
- Applications: PCR, incubation, storage
- Suitable for cutting to fit part plates
- Sheet format: 130 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
... Read More | 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is 4titude gas permeable adhesive seal, peelable; suitable for cell culture Our Cell Culture Adhesive Seal is a gas permeable adhesive seal which seals assay and tissue culture plates, microplates and storage plates. The seal prevents evaporation and contamination whilst enabling cells to breathe. It is made of a non-woven fiber with an acrylate adhesive layer for effective sealing. The seal has a low moisture transfer rate and a porosity enabling gas exchange. Due to its paper-based material it should not be used in wet conditions. The seal is suitable for cell culture and enables long term culture with significantly reduced evaporation. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Peelable
- Seal integrity range: -20°C to 40°C
- Gas permeability rate: 8,900m3/m2/day
- Moisture vapor transmission rate (very low): 4,200g/m2/day
- Air porosity: 10 sec/100 cc/im2
- RNase/DNase free
- Application: bacterial and eukaryotic cell culture
- Sheet format: 135 x 80mm
- Available sterile (4ti-0517/ST)
... Read More | 4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an 4titude optically clear heat sealing film, non-peelable, difficult to pierce; suitable for qPCR, optical applications and storage Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Weld Heat Seal is an optically clear polymer film forming a permanent seal to polypropylene plates. The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Weld Heat Seal forms a complete seal to a plate, enabling both low and very high temperature uses, including low temperature storage and high temperature incubations. This seal is suitable for PCR/qPCR, even without the use of a pressurized heated lid, and is 100% effective when used in water bath thermal cyclers. The permanent nature of this 100% effective seal renders it suitable for the storage and disposal of hazardous material. Clear Weld Heat Seal demonstrates a good solvent resistance and can be utilized for long term compound storage. Samples can be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). This seal is available as sheets, for use with manual and semi-automated sealers, such as our Semi-Automated Sheet Heat Sealer. Also available in multiple roll formats compatible with specified automated heat sealers, such as our Automated Roll Heat Sealer. Key Features: - Permanent seal
- Difficult to pierce
- Non-peelable
- Seal integrity range: -80°C to 110°C
- DMSO and solvent resistant
- Autoclavable (121°C)*
- Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Applications: suitable for PCR and qPCR, long term storage, and disposal of hazardous materials
- Seals polypropylene plates
- Compatible with water bath thermal cyclers
- Sheet format: 125 x 78mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates, from 12 well to 1536 well
- Roll format: available in a variety of roll dimensions, to suit your choice of automatic heat sealing equipment
- Non-sterile as standard; sterilization available upon request
* Once autoclaved, not recommended for PCR applications. ... Read More | 4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high 4titude clear adhesive film, strong adhesive, peelable; suitable for PCR and optical applications; available as a full sheet, perforated for tearing into 8 well strips or 12 well strips Our PCR Seal is a durable transparent polyester film with a strong adhesive layer. The seal enables a high integrity and efficiently prevents sample evaporation. It is recommended for PCR, qPCR, and other optical applications (e.g. fluorescence or colorimetric measurements) as well as sample storage. The PCR Seal is also available in two flexible formats with perforated sheets, to enable tearing into 8 well and 12 well strips, respectively. This allows for sealing of complete 96 well plates, but also individual or multiple divisible plate strips, perfectly complementing these products. For all adhesive seals, the best sealing results are achieved using the hand held Adhesive Seal Roller (4ti-0502). Key Features: - Non-pierceable, please refer to our PCR Foil Seal Strong for a pierceable variant
- Peelable
- Seal integrity range: -20°C to 110°C
- Non-sterile
- Free from DNase, RNase, and human genomic DNA
- Applications: PCR, qPCR
- Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal
- Sheet format: 135 x 80mm, to fit all standard SBS footprint PCR and qPCR plates, microplates, assay and storage plates
- Perforated sheet format: 115 x 100mm, for tearing into 8 well strips
- Perforated sheet format: 137 x 71mm, for tearing into 12 well strips
... Read More | Cell Freezing Containers for controlled-rate alcohol-free cell freezing provide a highly reproducible -1?/minute freezing rate when placed in a -80? freezer, with no alcohol or fluids required. The Cell Freezing Container technology utilizes a thermo-conductive alloy core and highly-insulative outer Cell Freezing Containers for controlled-rate alcohol-free cell freezing provide a highly reproducible -1?/minute freezing rate when placed in a -80? freezer, with no alcohol or fluids required. The Cell Freezing Container technology utilizes a thermo-conductive alloy core and highly-insulative outer material to control the rate of heat removal to provide reproducible cell cryopreservation. The insulative outer housing and thermo-conductive solid state core ensure consistent heat removal to all vials throughout the freezing period. Cell Freezing Containers can replace isopropanol-based freezing containers such as Mr. Frosty by ThermoFisher Scientific and others, which can consume up to 12l per year of IPA and cost hundreds of dollars per unit per year to maintain. - Cost saving as no alcohol or fluids required
- Consistent heat removal through freezing period
- Unbreakable, easy and safe to open when frozen
- Easy and fast vial identification and removal
- Quick reuse time: the containers are ready to use again after 5 minutes
- For use with stem cells, primary cells and cell lines
... Read More |
| Applications | PCR, Storage Applications, Incubation | Cell Culture | PCR, qPCR, Long Term Storage, Disposal of Hazardous Materials | PCR, qPCR | Suitable for use with Stem cells, including human and mouse embryonic, breast and colon cancer, preadipocytes, progenitor, human endothelial, glioblastoma. Primary cells, including WBCs, human cardiac, muscle, mouse. Cell lines, including CHO, LnCap, HTB77, A549, HeLa. |