| Description | 4titude low profile, flat optical bottom, 0.1ml clear polypropylene wells, clear polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 180μl. This PCR plate with optically clear flat bottom wells is ideal for microscopy applications. Optical bottom plates are 4titude low profile, flat optical bottom, 0.1ml clear polypropylene wells, clear polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 180μl. This PCR plate with optically clear flat bottom wells is ideal for microscopy applications. Optical bottom plates are ideal for applications requiring single cell sorting followed by molecular biology techniques such as (q)PCR and sequencing. The flat bottoms enable excellent stackability, making these plates well suited for small sample volume storage such as compound libraries, with no risk of damaging the seal of the plate below. Additionally, the small well volume enables excellent sample recovery. The low profile wells of this plate are shorter than "standard" profile wells, which decreases the "dead space" between the heated lid of the thermal cycler and the reagents in the well. This reduces condensation forming on the side wall of the tubes, moderating changes in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Stackable
- Ultra-smooth, uniform, thin-walled polypropylene wells for optimum PCR and real-time (RT-qPCR) results
- <0.1ml (100μl) working volume, 0.18ml (180μl) total well capacity
- The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, and makes it ideal for use with robotic systems
- Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
- Improved seal integrity due to thermal stability of frame
- Alphanumeric grid reference to aid well and sample identification
- Suitable for microscopy and small volume sample storage
- Recommended for low volume PCR
- Compatible with standard multichannel pipettes
- Ideal for use with robotic systems
- Also available as an Individual Access plate (4ti-0970/RA) with individually detachable and sealable wells
- Available barcoded upon request
... Read More | 4titude 1.2ml and 2.2ml square wells, U and V shaped bottom, clear polypropylene. These storage plates are designed for high density sample collection and storage for a wide array of applications within cell biology, molecular biology and drug discovery. They come in three formats: 1.2ml 4titude 1.2ml and 2.2ml square wells, U and V shaped bottom, clear polypropylene. These storage plates are designed for high density sample collection and storage for a wide array of applications within cell biology, molecular biology and drug discovery. They come in three formats: 1.2ml volume U shaped well plates (4ti-0126), 2.2ml volume V shaped (4ti-0132), and 2.2ml volume U shaped (4ti-0136) plates. 4ti-0126 is also recommended as an elution plate on KingFisher™ platforms. All of these plates are ultra-flat for a completely uniform seal, either with adhesive or heat seals, or with our accompanying silicone sealing mat (4ti-0137). These plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform. Key Features: - Made from polypropylene, a material with very low biomolecular binding characteristics, a high temperature tolerance and resistance to many standard laboratory chemicals, including DMSO
- Autoclavable
- Free from RNase, DNase, human genomic DNA and endotoxins
- Conical V-bottoms (4ti-0132) and U-shaped bottoms (4ti-0126 and 4ti-0136)
- Square wells, to make the best use of space, and to improve mixing
- Alphanumeric grid reference to aid well and sample identification
- SBS footprint
- Clear plate, perfect for storage applications
- Temperature range for use: -80°C to 120°C
- Best for precipitation, centrifugation and small volume recovery due to the conical V bottom, as the liquid gathers at the lowest point of the V for easy pipetting
- U-shaped bottom plates are best for washing, mixing and pelleting and give high surface area
- Stackable
- Suitable for adhesive and heat sealing
- Available with a U-shaped bottom in 1.2ml and 2.2ml
- Also available with a V-shaped bottom in 2.2ml
- Non-sterile as standard, sterilization available upon request
- Available barcoded upon request
- A clear silicone sealing mat (4ti-0137) is also available to fit these plates
... Read More | 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar 4titude 96 well rigid plate, vertically and horizontally scored, snaps easily into part plates, 8 well strips, 12 well strips, part strips or individual tubes; low profile, 0.1ml polypropylene wells, polycarbonate frame; working volume: <100μl, total well capacity: 200μl. The FrameStar Breakable Horizontally and Vertically PCR Plate, Low Profile allow for the most flexible, efficient and cost-effective use of FrameStar PCR plates, ensuring not a single tube is wasted. Our FrameStar Breakable Horizontally and Vertically PCR Plates, Low Profile utilize the 2-component design of the FrameStar range, which combines the advantages of thin-walled polypropylene tubes for optimum PCR results and a rigid frame portion for easy and reliable handling. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
- Low profile, 0.1ml wells, <100μl working volume, with a 200μl total well capacity when used with sealing options
- Plates can be broken up in both 8-strip vertical and 12-strip horizontal directions, resulting in individual strips, part strips, or even individual tubes, giving you the highest range of flexibility
- Breaking a plate is more accurate, more convenient, and safer than cutting it with scissors, as it avoids damaging the sealing rings and contamination of the wells
- Plates can be filled, sealed and separated for storage, processing or distribution
- Easy to break at any temperature
- The plate can be adapted to individual pipetting schemes without the need to waste empty wells
- Separated strips or tubes can be used for the positive control to avoid contamination of the samples
- Compatible with all instruments that fit non-skirted, low profile plates
- NB: In some cases you may have to break off the end tabs for it to fit
- Compatible with standard multichannel pipettes
- Available as a FrameStar Breakable Vertically PCR Plate and FrameStar Breakable Vertically PCR Plate, Low Profile that snap into 8-tube strips or part plates
- Also available as a FrameStar Breakable Horizontally and Vertically PCR Plate
... Read More | 4titude 96 individual tubes in plate format, low profile, flat bottom 2D coded, 0.1ml clear polypropylene tubes, white rigid polycarbonate frame, linear barcoded, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 well, fully skirted, low profile format with each tube 4titude 96 individual tubes in plate format, low profile, flat bottom 2D coded, 0.1ml clear polypropylene tubes, white rigid polycarbonate frame, linear barcoded, cut corner H1, working volume: <100μl, total well capacity: 180μl. 96 well, fully skirted, low profile format with each tube inserted separately into the plate frame, allowing for selection and removal of individual tubes from the plate. Each tube clicks into place in the frame ensuring tubes are secure once inserted. The Individual Access range includes PCR plates with 2D coded flat bottoms for applications that require superior sample tracking. In applications where it is essential for samples to be tracked throughout their processing, e.g. for diagnostic assays on clinical samples, tube labeling is a far safer and reliable method compared to cap or seal labeling (which can be misplaced, damaged or rendered unreadable after piercing). Empty frames are available for tubes to be transferred to. The frames can be re-used multiple times, depending on the application. Sample tubes can be identified by the unique 2D code on the base of the wells, removed from the Individual Access plate quickly and easily, and moved to another Individual Access frame for downstream processing or storage. Quick selection of desired tubes reduces the time needed for the sample plate to be out of the freezer and therefore reduces the chance of other wells defrosting in the meantime. Flat bottom PCR plates can be stacked, allowing for optimal use of freezer space as multiple plates can be housed in the same space as a storage rack. Key Features: - Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
- Individually removable from the rigid frame, while the rest of the tubes can remain in storage, reducing freeze-thawing of the whole plate
- Thin walled tubes are made from PP for optimal results in (q)PCR whilst also being suitable for storage and incubation
- <100μl working volume, <180μl total well capacity
- Rigid polycarbonate frame provides mechanical stability of the plate
- These plates are labeled with linear Code 128-format barcodes to aid identification and traceability for your samples
- Alphanumeric grid reference to aid well and sample identification
- Suitable for small volume sample storage, allowing for optimal use of freezer space as multiple plates can be housed in the same space as a storage rack
- Ideal for use with robotic systems
- Fewer transfer steps as the same tube can be used for microscopy, (q)PCR and storage
- Each tube can be individually heat sealed using the Individual Access Pierce Heat Seal Strong, such as the contents of each tube is left secure from cross contamination and evaporation for storage and transfer
- Each tube can still be separated after sealing
- Also available as a Individual Access optical bottom plate (4ti-0970/RA) with black frame, ideal for microscopy and PCR
- Empty frames are available for tubes to be transferred to; frames can be re-used multiple times, depending on the application
- We also offer customization of the Individual Access Plates such as color coding of the individual wells; please contact an expert for details
- The plate can be sealed in one step using Individual Access Pierce Heat Seal Strong (4ti-05381/RA) on the Semi-Automated Sheet Heat Sealer (using the 59-2005 Individual Access adapter), resulting in individually sealed tubes with pierceable seals to allow for sample access
... Read More | FluidX 1ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
- Made
FluidX 1ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities - Next Generation manufacturing techniques
- Code readable without removing tubes from racks
- Suitable for cryogenic storage
- Made from high-quality virgin PP
- Available in 96-well format SBS racks or bulk
- Sealable with screw caps/TPE septum caps
Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers. Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications. Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white. ... Read More |