Lab Plasticware

4titude 1.2ml or 2.0ml round wells, U-shaped bottom, clear polypropylene. These 96 deep well storage microplates are suitable for many manual and automated protocols, such as the Illumina^® library and sample preparations, due to the plates' SBS footprint. Additionally, they are suitable for use

4titude 1.2ml or 2.0ml round wells, U-shaped bottom, clear polypropylene. These 96 deep well storage microplates are suitable for many manual and automated protocols, such as the Illumina^® library and sample preparations, due to the plates' SBS footprint. Additionally, they are suitable for use on magnetic plates for bead separation protocols. Our round deep well storage microplates are available in two types of well volumes: 1.2ml wells (4ti-0120) and 2.0ml wells (4ti-0130).

Both of these plates are ultra-flat for a completely uniform seal, either with our adhesive or heat seals, or with our accompanying silicone sealing mats (4ti-0135 mat for the 1.2ml plate; 4ti-0138 mat for the 2.0ml plate). These plates are manufactured in cleanroom facilities which are certified free of RNase, DNase, human genomic DNA and endotoxins. We use only the highest medical grade virgin polypropylene with high resistance against chemicals such as DMSO, phenol, and chloroform.

Key Features:

• Made from polypropylene, a material with very low biomolecular binding characteristics, a high temperature tolerance and resistance to many standard laboratory chemicals, including DMSO
• Autoclavable
• Free from RNase, DNase, human genomic DNA and endotoxins
• U-shaped bottoms
• Round wells, suitable for most applications as they reduce droplet effects and wicking
• Alphanumeric grid reference to aid well and sample identification
• SBS footprint
• Clear plate, perfect for storage applications
• Suitable as a collection plate from filter systems
• Temperature range for use: -80°C to 120°C
• U-shaped bottom plates are best for washing, mixing and pelleting and give high surface area
• Stackable
• Suitable for adhesive and heat sealing
• Available with 1.2ml and 2.0ml wells
• Non-sterile as standard, sterilization available upon request
• Available barcoded upon request
• 2 clear silicone sealing mats (4ti-0135 and 4ti-0138) are also available to fit these plates

4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H12; working volume: <100μl, total well capacity: 200μl; designed for use on Roche LightCycler^® 96 and 480 (with 96 well block). Our FrameStar Roche Style plates are designed to achieve optimized assay

4titude low profile, 0.1ml polypropylene wells, polycarbonate frame, cut corner H12; working volume: <100μl, total well capacity: 200μl; designed for use on Roche LightCycler^® 96 and 480 (with 96 well block). Our FrameStar Roche Style plates are designed to achieve optimized assay conditions on the Roche LightCycler^® 96 and 480 (with 96 well block). This particular style of plate is in a low profile 96-well format; perfect for reaction volumes of 10-100μl. The wells are shorter than "standard" profile wells, which decrease the "dead space" between the heated lid of the thermal cycler and the sample in the well. This eliminates condensation forming on the side wall of the tubes, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl. The semi-skirted frame allows for labeling or barcoding.

Key Features:

• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Ultra-smooth, uniform, thin-walled polypropylene tubes for optimum PCR and real-time (RT-qPCR) results
• <0.1ml (100μl) working volume, 0.2ml (200μl) total well capacity
• Rigid polycarbonate frame for added mechanical stability
• Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
• Improved seal integrity due to thermal stability of frame
• Alphanumeric grid reference to aid well and sample identification
• Compatible with the Roche LightCycler^® 96 and 480 (with 96 well block)
• Recommended for low volume PCR
• Ideal for use with robotic systems
• Compatible with standard multichannel pipettes
• Standard plate comes with clear polypropylene wells on a clear polycarbonate frame
• Also available with white wells for optimum signal-to-noise ratio when using fluorescent based assays
• Available barcoded upon request;
• Combi packs available with qPCR Seal (4ti-0560) and (for 4ti-0951) with Optically Clear Windowed qPCR Seal (4ti-0564)

4titude low profile, flat optical bottom, 0.1ml clear polypropylene wells, clear polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 180μl. This PCR plate with optically clear flat bottom wells is ideal for microscopy applications. Optical bottom plates are

4titude low profile, flat optical bottom, 0.1ml clear polypropylene wells, clear polycarbonate frame, cut corner H1, working volume: <100μl, total well capacity: 180μl. This PCR plate with optically clear flat bottom wells is ideal for microscopy applications. Optical bottom plates are ideal for applications requiring single cell sorting followed by molecular biology techniques such as (q)PCR and sequencing. The flat bottoms enable excellent stackability, making these plates well suited for small sample volume storage such as compound libraries, with no risk of damaging the seal of the plate below. Additionally, the small well volume enables excellent sample recovery.

The low profile wells of this plate are shorter than "standard" profile wells, which decreases the "dead space" between the heated lid of the thermal cycler and the reagents in the well. This reduces condensation forming on the side wall of the tubes, moderating changes in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20μl.

Key Features:

• Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
• Stackable
• Ultra-smooth, uniform, thin-walled polypropylene wells for optimum PCR and real-time (RT-qPCR) results
• <0.1ml (100μl) working volume, 0.18ml (180μl) total well capacity
• The rigid polycarbonate skirt of this design eliminates warping and distortion during PCR, and makes it ideal for use with robotic systems
• Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
• Improved seal integrity due to thermal stability of frame
• Alphanumeric grid reference to aid well and sample identification
• Suitable for microscopy and small volume sample storage
• Recommended for low volume PCR
• Compatible with standard multichannel pipettes
• Ideal for use with robotic systems
• Also available as an Individual Access plate (4ti-0970/RA) with individually detachable and sealable wells
• Available barcoded upon request

FluidX 0.5ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage

FluidX 0.5ml tri-coded tubes offer unequaled sample audit traceability, enabling sample tracking and data sharing between multiple users, labs, locations and automation capabilities

• Next Generation manufacturing techniques
• Code readable without removing tubes from racks
• Suitable for cryogenic storage
• Made from high-quality virgin PP
• Available in 96-well format SBS racks or bulk
• Sealable with screw caps/TPE septum caps

Designed and developed with broad compatibility in mind, the tubes perform without compromise in conjunction with automated barcode reading, capping and sample management systems from Azenta Life Sciences and all other industry-recognized manufacturers.

Provides a lifelong and secure chain of custody for samples in biobanks, compound libraries and a broad range of biological and chemical stores, including cryogenic storage. Developed to exceed the demands of sample security, management and tracking in modern high density storage applications.

Each tube features a permanent 2D code laser etched in high contrast on the tube base, a permanent 1D linear barcode and human-readable number laser etched in high-contrast on the tube side. All three codes are identical and auditing processes guarantee all three codes match; standard 2D coding option is black on white.

FluidX cap carriers enable automated capping of 96-format sample storage tubes, leading to improved process efficiency and allowing batch filling of tubes prior to capping

• Suitable automated and manual capping
• Available in 96-format SBS footprint
• For use with external/internal thread tubes
• Available

FluidX cap carriers enable automated capping of 96-format sample storage tubes, leading to improved process efficiency and allowing batch filling of tubes prior to capping

• Suitable automated and manual capping
• Available in 96-format SBS footprint
• For use with external/internal thread tubes
• Available empty or pre-filled with caps

Suitable for manual use or for use with Azenta Life Sciences Semi-Automated Screw Cap Decappers/Recappers, Single Channel and IntelliXcap™ Automated Screw Cap Decappers/Recappers.

• Enable uncapped tubes to be used immediately and then capped using an automated capping and de-capping system
• When used manually, by transferring caps from the carrier to the tube using a single tube transfer device, the operation becomes faster and the risk of contamination is reduced as cap handling is eliminated
• Available in cases of 10 or 50, empty or pre-filled with low-retention screw caps that can reduce sample loss