| Description | The ElectroForce® 3200 Series III test instruments feature a 225 N (450 N optional) maximum force. With the versatility of static to 300 Hz frequency response, the table-top configuration is adaptable to a variety of biomedical research and engineered materials test applications, including torsion The ElectroForce® 3200 Series III test instruments feature a 225 N (450 N optional) maximum force. With the versatility of static to 300 Hz frequency response, the table-top configuration is adaptable to a variety of biomedical research and engineered materials test applications, including torsion testing, creep under dynamic loading and special environments (hot/cold chambers).... Read More | ElectroForce 3500 test instruments are available in three base system configurations. The 3510 instrument, rated at 7.5 kN, is configured with the linear motor installed in the upper crosshead, making it well-suited for applications requiring a temperature-controlled bath. The 3520 instrument is ElectroForce 3500 test instruments are available in three base system configurations. The 3510 instrument, rated at 7.5 kN, is configured with the linear motor installed in the upper crosshead, making it well-suited for applications requiring a temperature-controlled bath. The 3520 instrument is rated at 7.5 kN, and the linear motor is installed in the lower baseplate. The 3550 instrument is a higher-force configuration rated at 15 kN.
Features: - Versatility for a variety of mechanical fatigue and dynamic characterization tests
- Can perform tests over a wide frequency range
- Air-cooled, clean-room compatible and quiet operation
- Optional 49 Nm or 70 Nm torsional motor is available for multi-axial test applications.
... Read More | The TA Instruments ElectroForce Apex 1 Mechanical Testing Instrument empowers scientists, engineers, and technicians to assess mechanical properties efficiently and reliably through monotonic tests, fatigue studies, and other material characterization methods, all with minimal training required.
The TA Instruments ElectroForce Apex 1 Mechanical Testing Instrument empowers scientists, engineers, and technicians to assess mechanical properties efficiently and reliably through monotonic tests, fatigue studies, and other material characterization methods, all with minimal training required.
The ElectroForce Apex 1 Mechanical Testing Instrument enables customers across diverse industries to measure mechanical properties easily and efficiently. Its enhanced stroke length and user-friendly design support precise tensile and fatigue testing of high-performance and lightweight polymers and composites.
- Versatility – increased motor stroke range (100mm) expands testing of more materials across diverse industries, offering greater insights from one instrument
- Dynamic performance – completes fatigue testing for complex materials up to 30% faster, resulting in faster product development and validation
- Streamlined workflow – automated controls and fewer process steps reduce operator errors and ensure precision, enabling safe and confident testing
Features: - Enhanced test setup and safety: Integrated motor brake, crosshead lock sensing, and setup mode reduce training and ensure sample and system protection.
- Dependable testing: Automated control system tuning and data acquisition enables confident characterization of materials while minimizing the need to manage instrument operations.
- User-friendly features: SmartSwap™ Technology simplifies sensor and configuration, while the System Status Indicator provides quick visual feedback on instrument status.
- Exceptional accuracy: High-precision displacement sensor exceeds ASTM E2309 Class A standards with 1 nanometer resolution.
- Flexible testing: Available in 3 configurations (axial tabletop, axial floor standing, and axial torsional floor standing) and offers a broad range of accessories for real-world testing.
Material strength and durability testing is increasingly important for accelerating the development of products in demanding applications from airplanes to construction materials. Leading labs and manufacturers commonly use monotonic and fatigue testing to inform material selection and design, followed by component and product performance assessments.
Employing monotonic and fatigue testing on the ElectroForce Apex 1 Instrument early in development can reduce costs, by identifying and eliminating weaknesses in material selection and design, before the validation or post-launch phase.
Broaden the Scope of Your Material Analysis
The ElectroForce Apex 1 linear motor technology enables versatile testing across a wide range of forces, frequencies, and displacements, from < 1Hz to > 100Hz and microns to 100mm. Purpose-built for mechanical testing, its advanced design ensures precise execution of experiments, delivering faster results and accelerating development programs. The friction-free motor, combined with high-accuracy displacement sensor technology, helps ensure accurate motion control, preserving even subtle material characteristics without distortion. This innovative system empowers researchers to perform reliable and efficient testing with maximum precision.
Expedite Testing with Reduced Steps
The ElectroForce Apex 1 Instrument, powered by our next-generation TuneIQ technology, reduces or eliminates the need to carefully select and change control modes during setup and test execution.
Simply install your sample and start testing — no complex control mode adjustments are required.
- Simplified test set-up processreduces operator training time and errors, increasing operator confidence
- Constant sample monitoring protects your sample and the instrument
- Sample break detection immediately stops the motor when a sample fracture is detected, preventing damage to the sample surface
Evaluate Samples in Real-Life Conditions
Accurate mechanical testing often needs to simulate real-life conditions to best measure material properties. ElectroForce Apex 1 Instrument accessories empower users to measure sample behavior under a wide variety of conditions and end-use environments:
- Environmental
Ovens and baths simulate a wide temperature range, including conditions to simulate the human body for biomaterials and medical device research.
- Clamps
Grips for tension, or tension and compression, are commonly used to simulate sample conditions, in addition to compression platens and bend fixtures.
- Sensors
Optional sensors measure sample behavior under many conditions, including low force, submersible testing, and direct strain measurement.
Accelerate Operator Training and Proficiency
The ElectroForce Apex 1 Instrument helps minimize training needs with its intuitive operation and user-friendly design. Operators quickly build confidence thanks to features that expedite test processes and reduce the risk of errors.
- Guided test-specific workflows streamline inputs and reduce setup complexity.
- Automated data acquisition setup ensures reliable and accurate data recording.
- Next-generation TuneIQ automates control modes and reduces the tuning process.
- Test parameter traceability enables tracking from setup to the final TRIOS software data file.
- Integrated software and data analysis automatically display the most relevant data, enabling insightful conclusions.
... Read More |