Fatigue testing machines are generally designed to identify the danger point or location of failure of a test piece of material that has been subjected to a series of stresses. This measures the durability or lifespan of a material or component, as well as the maximum load that it can withstand. After a sample is loaded into the fatigue tester, it is stressed until either a pre-determined number of cycles is reached or the material experiences failure. These tests can be performed with either constant amplitude or using servo hydraulic test machines.
|  |  |  |
| Company | TA Instruments – a division of Waters Corporation | TA Instruments – a division of Waters Corporation | TA Instruments – a division of Waters Corporation |
| Item | ElectroForce 3500 Mechanical Testing Instrument | DuraPulse™ Stent/Graft Test Instrument | ElectroForce 3300 Mechanical Testing Instrument |
| Citations | | | |
| Reviews | | | |
| Catalog Number | ElectroForce 3500 | DuraPulse™ Stent/Graft Test Instrument | ElectroForce 3300 |
| Price | | | |
| Description | ElectroForce 3500 test instruments are available in three base system configurations. The 3510 instrument, rated at 7.5 kN, is configured with the linear motor installed in the upper crosshead, making it well-suited for applications requiring a temperature-controlled bath. The 3520 instrument is ElectroForce 3500 test instruments are available in three base system configurations. The 3510 instrument, rated at 7.5 kN, is configured with the linear motor installed in the upper crosshead, making it well-suited for applications requiring a temperature-controlled bath. The 3520 instrument is rated at 7.5 kN, and the linear motor is installed in the lower baseplate. The 3550 instrument is a higher-force configuration rated at 15 kN.
Features: - Versatility for a variety of mechanical fatigue and dynamic characterization tests
- Can perform tests over a wide frequency range
- Air-cooled, clean-room compatible and quiet operation
- Optional 49 Nm or 70 Nm torsional motor is available for multi-axial test applications.
... Read More | The DuraPulse™ Stent/Graft test (SGT) instrument extends the performance and reliability that ElectroForce SGTs have become known for over the past 20 years. Still utilizing proprietary high-bandwidth, low-distortion ElectroForce actuator technology to provide best-in-class performance, the The DuraPulse™ Stent/Graft test (SGT) instrument extends the performance and reliability that ElectroForce SGTs have become known for over the past 20 years. Still utilizing proprietary high-bandwidth, low-distortion ElectroForce actuator technology to provide best-in-class performance, the DuraPulse SGT incorporates a modular manifold design that allows the user to easily change out manifold and tube sets to optimize sample throughput for various stented device sizes.
Key Benefits: - Achieve highest strain and frequency combinations with closed-loop, symmetric dual-sided pulse
- Single test instrument can be optimized for device geometry and sample number with interchangeable manifold sets – 12, 8, 6, and 4 (bifurcated) mock vessel options
- Accommodates wide range of device diameters – 2 mm to 50 mm
- Conveniently measure tube strain across all tubes with optical micrometer positioning slide and 360° manifold rotation, and a tube scanning function that holds command levels and allows the laser to be repositioned during testing
- Select from 3 ID/OD Strain Calculation modes including Zero Strain or Zero Stress Conditions (as defined by ISO 25539-2)
- Automate test pressure control with optional Pressure Control Accessory (PCA)
- Clearly identify system operation state with System Status Indicator (SSI) lights
- Instrument reliability for years of use supported by industry leading 10 year actuator warranty
- Meets or exceeds international testing standards such as ISO 25539-2 and ASTM F2477
... Read More | ElectroForce 3300 Series III instruments are well-suited for a variety of tests that include ASTM and ISO standards for materials and biomaterials characterization and long-term durability tests of materials, components and devices.
The ElectroForce 3300 family includes two models; the ElectroForce 3300 Series III instruments are well-suited for a variety of tests that include ASTM and ISO standards for materials and biomaterials characterization and long-term durability tests of materials, components and devices.
The ElectroForce 3300 family includes two models; the ElectroForce 3310 provides 1000 N of maximum force while the ElectroForce 3330 provides 3000 N. Both models are available with either table-top or floor-standing frames. The floor-standing frame enables the expansion of capabilities by either adding torsion or extended stroke motors. All configurations can perform tests that range from one cycle per day (or static tests) up to 100 Hz. Select the force capacity and frame configuration that is appropriate for your testing needs.
Key Features - High resolution and high accuracy displacement measurement for both the dynamic axial motor and the optional torsional motor
- Static to 100 Hz dynamic performance for a variety of applications
- Integrated System Status Indicator (SSI) Light for highly visible color-coded display of instrument status
- Electric motor driven test space adjustment with convenient locks, plus the added convenience of the lower Micro-adjust for precision alignment of grips.
- Optional 14 Nm and 25 Nm torsional motor are available for multi-axial test applications
- Optional 150 mm stroke extension motor to increase the instrument versatility for slower longer-travel tests
- Accommodates a variety of environmental chambers including temperature-controlled saline baths and hot/cold chambers
... Read More |
| Applications | Material testing | Inquire | Material testing |
| Get Quote | | | |