| Description | Products contentProducts IntroductionThe 2.5×TFS Master Mixture is a premixed system for all types of multiplexed PCRs. It contains DNA polymerase, PCR Buffer, dNTPs, Mg2+, stabilizers and enhancers at a concentration of 2.5×, which makes it easy and fast to use.The DNA polymerase Products contentProducts IntroductionThe 2.5×TFS Master Mixture is a premixed system for all types of multiplexed PCRs. It contains DNA polymerase, PCR Buffer, dNTPs, Mg2+, stabilizers and enhancers at a concentration of 2.5×, which makes it easy and fast to use.The DNA polymerase contained in the 2.5×TFS Master Mixture is a genetically engineered recombinant enzyme with 5'→3' DNA polymerase activity and no 5'→3' exonuclease activity; it is a new antibody-modified hot-start enzyme that can effectively reduce non-specific amplification caused by non-specific binding of primer and template or primer dimerization at room temperature. The DNA polymerase is modified by a new type of antibody, which is an antibody-modified hot-start enzyme, and can effectively reduce the non-specific amplification caused by the non-specific binding of primers and templates or primer dimerization at room temperature, and at the same time, it has the excellent features of short activation time, strong amplification ability, high sensitivity, good stability, etc. The unique PCR buffer system and the hot-start enzyme are suitable for the PCR. The unique combination of PCR buffer system and hot starter enzyme significantly improves the PCR amplification efficiency, sensitivity and inhibitor tolerance.The product has a wide range of applications, not only for general and dye-based real-time fluorescence PCR, but also for forensic multiple STR amplification reaction, which can be used in forensic analysis, parentage identification and scientific research and other human genetic identification. caveat1. Before use, please mix the product gently by turning it up and down after it is completely melted and centrifuged briefly.2. Avoid repeated freezing and thawing of the product, which may degrade its performance. This product can be stored at -20℃ for a long time. UsageThe following examples are STR reaction systems and conditions, which should be improved and optimized according to the specific use, template, primer structure, target fragment size and amplification effect.PCR reaction systemExtract the DNA amplification reaction system:Blood Card Direct Expansion Reaction System:Attention:1) When designing the primers, the difference between the Tm of each primer should be minimized, and the difference should be controlled within 5℃ as far as possible. If the amplification efficiency is not high, the concentration of primers can be increased; if non-specific amplification occurs, the concentration of primers can be decreased to optimize the reaction system. For optimal amplification, it is recommended that the primer mixture be vortexed for 10 s and centrifuged briefly before use.(2) The amount of DNA template is usually 0.1 ng-1 ng of human genomic DNA as a reference, and the amount of template input can be adjusted according to the amplification effect to determine the optimal amount of template to use.3) Human genome contamination should be avoided during the operation, and a set of negative control (no DNA) is recommended for the experiment.2. PCR reaction conditionsAttention:1) Two-step PCR reaction program is recommended. If you can not get good results due to low Tm value of the primers or large difference in Tm value between primers, you can try to use three-step PCR amplification, the annealing temperature should be set in the range of 55℃-65℃ as a reference (the annealing temperature is usually 5℃ lower than the Tm value), and the extension temperature should be set at 72℃.(2) When good amplification results are not obtained, the annealing and extension time can be appropriately prolonged to 120 s-150 s. The annealing and extension time can be extended to 120 s-150 s. (3) When the PCR product detection appears to be incomplete plus A, the final extension time can be appropriately extended to 30-40 min. 4) The number of cycles can be set according to the downstream application of the amplified product, if the number of cycles is too small, the amplification is insufficient, the recommended number of cycles is 28-31 cycles.5) Blood card direct amplification can be based on the actual amplification effect to increase the 72 ℃ lysis step to improve the amplification efficiency.6) When using the ABI 9700 Thermal Cycler, perform amplification in MAX mode.7) PCR products can be stored at 2-8°C for short-term storage or at -20°C for long-term storage.Attention:(1) Usually, a primer concentration of 0.2 M can give better results, and 0.1-1.0 µM can be used as a reference for setting the range. If the amplification efficiency is not high, the concentration of primer can be increased; if non-specific reaction occurs, the concentration of primer can be decreased to optimize the reaction system.(2) The final concentration of the probe used is related to the fluorescence quantitative PCR instrument used, the type of probe, and the type of fluorescent labeling substance, please refer to the manual of the instrument or the specific requirements for the use of each fluorescent probe to adjust the concentration.3) Usually the amount of DNA template is 10-100 ng of genomic DNA or 1-10 ng of cDNA as a reference, as templates of different speciesThe number of copies of the target gene contained in them varies, and a gradient dilution of the template can be performed to determine the optimal amount of template to use. PCR reaction conditions :(1) The enzyme used in this product is activated by pre-denaturation at 95°C for 30 s. Most of the templates can be deconvoluted well under this condition. Under this condition, most of the templates can be well unchained. For templates with high GC content and complex secondary structure, the pre-denaturation time can be extended to 1 minute, so that the starting template can be fully unchained, and if the high temperature treatment time is too long, it will affect the activity of the enzyme; for simple templates, pre-denaturation can also be used for 20 s, and the optimal pre-denaturation time can be determined according to the template situation.(2) It is recommended to use two-step PCR program, the annealing temperature should be 58-64℃ as the reference range, and the annealing temperature can be increased in case of non-specific reaction. If you can't get good results due to the use of primers with low Tm value, you can try three-step PCR amplification, and the annealing temperature should be set in the range of 56℃-64℃ as a reference. The annealing and extension times for several common instruments are shown in the following table: 20 s for Roche, BioRad, Agilent, Hongshi, Dongshenglong, etc. 30 s for ABI 7000/7300/7500. The annealing/extension times can be set according to the different types of instruments and templates, please follow the instructions of the instruments. The annealing/extension time can be set according to different models of instruments and templates, please follow the instruction manual of the instrument... Read More | Inquire | Product Content:F665667Component5 mL40 mLStorageF665667A2×Flash PCR MasterMix (Dye) 5×1 mL 40×1 mL-20℃. Avoid freeze/thaw cycle.F665667BddH2O 5×1 mL40×1 mL-20℃. Avoid freeze/thaw cycle. Products Introduction This product is a premixed system consisting of a new Product Content:F665667Component5 mL40 mLStorageF665667A2×Flash PCR MasterMix (Dye) 5×1 mL 40×1 mL-20℃. Avoid freeze/thaw cycle.F665667BddH2O 5×1 mL40×1 mL-20℃. Avoid freeze/thaw cycle. Products Introduction This product is a premixed system consisting of a new high efficient fast DNA Polymerase, Mg2+, dNTPs, and PCR stabilizers and enhancers at 2× concentration. It is a new rapid DNA polymerase developed by CombiSigma with high amplification speed and stability. The extension speed is up to 5 s/kb, and the PCR can be completed in as little as 15 minutes, while longer fragments (>3 kb) or complex templates can be extended at a speed of 10-30 s/kb or a higher number of cycles. The unique MasterMix formula makes the whole reaction system very stable, while complex templates can be amplified effectively, and more than 98% of PCR amplification can be successful in one run. Simply add the DNA template and primers and top up with water to minimize human error, contamination and time.The dye (blue) has been added to the product and it is ready for electrophoretic detection at the end of the reaction. The PCR product is amplified with an 'A' base at the 3′ end and can therefore be used directly for T/A cloning and is suitable for use in the CombiVerge Seamless Cloning Kit, T4 Ligation Kit and sensory products.This product is mainly suitable for ultra-fast PCR, complex templates, complex secondary structures, gene cloning and large-scale genetic testing that requires high fidelity. quality control No exogenous nuclease activity was detected; no host residual DNA was detected by PCR; single-copy genes in various genomes could be amplified efficiently. UsageThe following is an example of a PCR reaction system and reaction conditions for amplifying a 1 kb fragment using human genomic DNA as a template, which should be improved and optimized according to the template, primer structure and size of the target fragment in actual operation.PCR reaction system Note: Please use the final concentration of 0.1-1.0 µM as a reference for setting the range of primer concentration. If the amplification efficiency is not high, the primer concentration can be increased; if a non-specific reaction occurs, the primer concentration can be decreased to optimize the reaction system.PCR reaction conditions Note: 1) Note: For simple templates, the pre-denaturation time can be controlled at 30 s-1 min, for complex templates such as bacterial fluids, the pre-denaturation time can be increased to 2 min.Optimization of parameter settings 1. Template DNA amount setting:Excessive amounts of template may result in non-specific amplification or smear. The recommended amount of template DNA in a 50 µl PCR reaction system is as follows:-Human genomic DNA 5 ng-500 ng-Escherichia coli genomic DNA 50 pg-100 ng-plasmid DNA 10 pg-1 ng 1. 30-35 number of cycles2. Primer concentration setting: The primer concentration can be set between 0.1 µM and 1.0 µM. A low primer concentration may result in low amplification products. Too high a primer concentration will inhibit specific amplification and may result in non-specific amplification.3. Annealing temperature setting: In general, the annealing temperature is 5℃ lower than the melting temperature of amplification primer Tm, so the annealing temperature can be lowered appropriately when the desired amplification efficiency cannot be obtained; the annealing temperature can be raised appropriately when non-specific reaction occurs. For complex templates, it is necessary to adjust the annealing temperature to achieve efficient amplification.4. Extension time setting: The extension time should be set according to the size of the amplified fragments. The following extension times are recommended: simple templates such as plasmids: 5-15 s/kb; regular genomes, cDNA templates: 10-15 s/kb; complex templates, crude templates: 20-30 s/kb; (the extension time should not be too short and should be at least 5 s/kb, but should not exceed 30 s/kb).5. Number of cycles: The number of cycles can be set according to the downstream application of the amplified product. If the number of cycles is too low, the amount of amplification will be insufficient; if the number of cycles is too high, the chance of mismatch will increase and the non-specific background will be serious. Therefore, the number of cycles should be minimized under the premise of ensuring the product yield... Read More | This product is a mixture of fast reverse transcription reagents. The 5 x EasyQuick RT MasterMix contains all the reagents required for reverse transcription from RNA templates to cDNA first strand, including EasyQuick RT Reversase, RNase Inhibitor, Random 6 mers, Oligo dT Primer, dNTP, EQ-RT BufferThis product is a mixture of fast reverse transcription reagents. The 5 x EasyQuick RT MasterMix contains all the reagents required for reverse transcription from RNA templates to cDNA first strand, including EasyQuick RT Reversase, RNase Inhibitor, Random 6 mers, Oligo dT Primer, dNTP, EQ-RT Buffer, etc. The reverse transcription efficiency of this product is high, and it can perform a good reverse transcription reaction on a small amount of RNA templates. The fluorescence quantitative template cDNA first strand synthesis can be completed in 15 minutes. This reagent kit is very convenient and fast to operate, and only RNA templates and water need to be added for reverse transcription reaction, making it particularly suitable for high-throughput detection.E665905Component200 TStorageE665905A5×EasyQuick RT MasterMix 400 µL-20℃. Avoid freeze/thaw cycle.E665905BRNase-Free Water 2×1 mL-20℃. Avoid freeze/thaw cycle. Product features1. Convenience: The ready to use reverse transcription Mix only requires the addition of RNA templates and water to initiate the reaction.2. Fast: Complete cDNA first strand synthesis in 15 minutes.3. High reverse transcription efficiency: The reverse transcription efficiency is above 90%.4. High sensitivity: PG level templates can also obtain high-quality cDNA.5. Read through complex templates: templates with high GC content and complex secondary structures.Matters needing attention1. During the operation, RNase contamination should be avoided to prevent RNA degradation or cross contamination during experiments. It is recommended that operators wear masks and disposable gloves, frequently change gloves, and use specialized instruments and consumables.2. The reverse transcription system is prepared on ice for operation to prevent RNA degradation. The MasterMix of the reagent kit should be stored at -20 ℃ as soon as possible after use, and repeated freeze-thaw should be avoided as much as possible.3.10 µ The reaction system can be used up to 1 µ G Total RNA, if the amount of template RNA is greater than 1 µ g. Please expand the reaction system proportionally.4. For RNA templates with complex secondary structures, it is recommended to incubate the template RNA at 65 ℃ for 5 minutes on ice before proceeding with the next step, followed by brief centrifugation.Operation steps1. Thaw the template RNA on ice; After thawing the components of the reagent kit at room temperature, immediately place them on ice. Before use, vortex shake and mix each solution, and centrifuge briefly before use.2. Prepare the reaction system according to the following table (please prepare the reaction solution on ice), vortex shake and mix well, briefly centrifuge, and collect the solution on the tube wall to the bottom of the tube. Reagent 10 µl Reaction system Final concentration RNA Template X µl 1 pg～0.5 µg ¹⁾ 5×EasyQuick RT MasterMix ²⁾ 2 µl 1× RNase-Free Water up to 10 µl /Attention:1) If the total RNA content is greater than 1 µ g, please expand the reaction system proportionally.2) 5 x EasyQuick RT MasterMix contains Oligo (dT), Random Prime, RNase Inhibitor, dNTP Mixture, EQ-RT Buffer, etc. 3. Incubate at 37 ℃ for 15 minutes. 4. Incubate at 85 ℃ for 5 seconds to inactivate reverse transcriptase.5. After a brief centrifugation, place it on ice for subsequent experiments. If it needs to be stored for a long time, please place it at -20 ℃... Read More | Inquire |