| Description | EnzymoPure™III M-MLV reverse transcriptase is a DNA polymerase that uses single stranded RNA or DNA as template to synthesize the first-strand complementary DNA strands (cDNA) rapidly and efficiently in the presence of primers. It is optimized to have a high thermal stability and high fidelityEnzymoPure™III M-MLV reverse transcriptase is a DNA polymerase that uses single stranded RNA or DNA as template to synthesize the first-strand complementary DNA strands (cDNA) rapidly and efficiently in the presence of primers. It is optimized to have a high thermal stability and high fidelity, and can synthesize long cDNA up to 12kb. Additionally, this product has RNase H activity that selectively degrades the RNA strand of an RNA-DNA hybrid, thus facilitating the synthesis of second-strand cDNA subsequently.EnzymoPure™III M-MLV Reverse Transcriptase is one of the most widely used high-quality reverse transcriptase. It is mainly used for synthesizing first-strand cDNA with total RNA or mRNA template. The obtained cDNA can be used directly for PCR, real-time PCR, second-strand cDNA synthesis and construction of cDNA libraries, etc. Moreover, it can also be used to perform RNA analysis by primer extension, or label DNA probes with fluorescence, biotin, digoxin or isotope.EnzymoPure™III M-MLV Reverse Transcriptase is a high efficient reverse transcriptase, requiring 10 minutes only to synthesize cDNA no longer than 3kb. To synthesize cDNA longer than 3kb, especially longer than 6kb, 60min of reverse transcription is recommended.EnzymoPure™III M-MLV Reverse Transcriptase is a high efficient reverse transcriptase, requiring 10 minutes only to synthesize cDNA no longer than 3kb. To synthesize cDNA longer than 3kb, especially longer than 6kb, 60min of reverse transcription is recommended.This product is highly cost-effective. EnzymoPure™III M-MLV Reverse Transcriptase is a recombinant reverse transcriptase expressed and purified from E. coli transformed with the expression plasmids carrying the pol gene of M-MLV with RNase H coding region included. The enzyme has been engineered to have better thermal stability and higher reverse transcription efficiency, and produce longer reverse transcript.Definition of enzyme activityInactivation or inhibition：RT III M-MLV Reverse Transcriptase can be inactivated by incubation at 80ºC for 10 minutes, or inhibited by EDTA, EGTA, inorganic phosphates, pyrophosphates and polyamine.This product is able to synthesize long cDNA. It enables easy reverse transcription of genes less than 8kb (Figure 1). The maximum length of cDNA can be up to 12kb. Figure 1. Agarose gel electrophoresis of PCR products amplified from the cDNA template synthesized with the RT III M-MLV Reverse Transcriptase (, #D7176). cDNA ranging from 0.2kb to 12kb in length can be synthesized high efficiently.RT III M-MLV Reverse Transcriptase has good thermal stability and high reverse transcription efficiency. It has an optimum working temperature of 42℃, but it is still highly active at 50℃. Reverse transcription at higher temperature can significantly improve the reverse transcription of RNA with high GC content and complex secondary structures. This reverse transcriptase has a high reverse transcription rate, requiring 30 minutes only to complete the synthesis of cDNA less than 6kb, and 10min only to obtain cDNA less than 3kb (Figure 2). Figure 2. Agarose gel electrophoresis of PCR products amplified from the cDNA template synthesized by the RT III M-MLV Reverse Transcriptase (, #D7176). 2µg total RNA extracted from HEK293T cells was reverse transcribed in a reaction volume of 20µl at different temperatures for different duration of reverse transcription, as indicated in the figure. After reverse transcription, 1µl reverse transcription product was used to amplify YWHAZ and ADAR1 genes of 2.6kb and 6.0kb, respectively.The concentration of RT III M-MLV Reverse Transcriptase is 200U/µl. When 20µl of reverse transcription volume is used, the D7176S, D7176M and D7176L are sufficient for 50, 250 and 1000 reactions, respectively.Precautions：Please refer to the instructions for reverse transcription of RNA with high GC content.This product is for R&D only. Not for drug, household, or other uses.For your safety and health, please wear lab coat and disposable gloves during the operation.Instructions for Use：1. First strand cDNA synthesis.a. Set up the first-strand cDNA synthesis in a nuclease free PCR tube on ice or at room temperature as follows. RNase Inhibitor and dNTP mix can be purchased from. Template (one of the three types of RNA)Total RNA0.1ng-5µgPoly(A) RNA/mRNA10pg-0.5µgSpecific RNA0.01pg-0.5µgPrimer (one of the three types of primer)Oligo(dT)18 Primer0.5µg (or 100pmol)Random Hexamer Primer0.2µg (or 100pmol)Gene-specific Primer15-25pmolDEPC-treated Water-To 13.7µl*(Optional) For RNAs with high GC content (e.g. ＞55%) or complex secondary structures, incubate the mixture of primer and template at 65ºC for 5 minutes, and immediately put it on ice to disrupt RNA secondary structures.Reaction Buffer (5X)-4µlRNase Inhibitor (40U/µl)-0.5µldNTP Mix (25mM each)-0.8µl**RT III M-MLV Reverse Transcriptase-1µlTotal Volume-To 20µl* ‘To 13.7µl’ means filling the mixture of template and primer to a total volume of 13.7µl with DEPC-treated water.** The volume of dNTP mix varies depending on the concentration of dNTP stock. If the volume of dNTP is not 0.8µl, adjust with DEPC-treated water accordingly.b. Mix the reaction by vortex or pipetting gently, centrifuge briefly to allow liquid to accumulate at the bottom of PCR tube.c. Incubate the reaction at 42℃for 10-60min if Oligo(dT)18 primer or gene-specific primer is used. If random hexamer is used, incubate at 25℃for 10min, followed by incubation at 42℃for 10-60min. For cDNA less than 3kb, 10-minute incubation is usually sufficient. For cDNA between 3kb and 6kb, we recommend 30 minutes incubation. While for cDNA exceeding 6kb in length, 60-minute incubation is recommended. When using random hexamers for the reverse transcription which will be followed by qPCR experiments, 10-minute incubation is sufficient regardless of the length of cDNA.Note: For RNA template with high GC content or secondary structures, incubate the reaction at 50℃for 60min. The RT III M-MLV Reverse Transcriptase maintains good reverse transcriptase activity at 50ºC, and reverse transcription at a higher temperature effectively reduce the interference of secondary structures.d. Stop the reverse transcription by incubating the reaction at 80℃for 10min to inactivate RT III M-MLV Reverse Transcriptase. Note: Heat-inactivation of reverse transcriptase is not recommended for long cDNA over 5kb, as this method may cause shearing of long cDNA fragments. e. The reverse transcription products can be used directly for subsequent experiments such as PCR, or stored at -20℃for future use. We recommend using 0.8µl and 2µl reverse transcription products in a PCR reaction volume of 20µl and 50µl, respectively.2. For other applications such as primer extension and probe labeling, please refer to reference related to M-MuLV reverse transcriptase (RNase H-).FAQ:1. The reverse transcription product of total RNA is invisible after electrophoresis.It is a normal phenomena, because the amount of RNA template is low, and the amount of reverse transcription products in different size is even lower. 2. No specific product can be amplified from the reverse transcription product.a. To exclude the problem of PCR reaction system or reverse transcription product, use gene-specific primers to amplify internal reference genes, such as actin and GAPDH. If reference genes can be amplified, but not the target gene, it indicates primers of target gene are not well designed, the expression of the target gene is too low to be detected, or the reverse transcription efficiency is low. b. Template RNA may be degraded. The integrity of total RNA can be checked by agarose gel or on-chip electrophoresis. Intact total RNA exhibits sharp, clear 28S and 18S rRNA bands, and the 28S rRNA band should be approximately twice as intense as the the 18S rRNA band. A ratio less than 2 indicates the degradation of total RNA and new total RNA should be prepared. c. RNA samples may contain some components that inhibit the activity of reverse transcriptase. Those contaminants include phenol, SDS, EDTA, guanidine salts, phosphoric acid, pyrophosphoric acid, polyamine, and spermidine etc, which can be removed effectively by column purification or precipitation, washing, and redissolution. Total RNA extracted by Zol (, R0011) or Trizol (, R0016) usually can meet the requirements of reverse transcription.d. Insufficient templates for reverse transcription. When DNase I used to remove the residual DNA in RNA sample is subjected to heat-inactivation prior to reverse transcription, EDTA should be added to RNA sample at a final concentration of 2.5mM to protect RNA from degradation under high temperature. Additionally, to amplify a specific gene, it is necessary to extract RNA from tissues in which the target gene is highly expressed. e. Inappropriate primer is used for reverse transcription. Random hexamer instead of Oligo(dT)18 should be used for the reverse transcription of bacterial total RNA which does not have poly(A) tails. Gene-specific primers used for reverse transcription must be well designed.f. For RNA template with high GC content or secondary structures, increase the reverse transcription temperature to 45-50℃ to improve the reverse transcription efficiency... Read More | Product Application：KNK437 has been used: as a heat shock factor 1 (HSF1) inhibitor to study its effects on the inhibition of viability and apoptosis activation in chemoresistant mice cells as an HSF1 inhibitor to study its effects on viability and apoptosis of colorectal cancer cells as a Product Application：KNK437 has been used: as a heat shock factor 1 (HSF1) inhibitor to study its effects on the inhibition of viability and apoptosis activation in chemoresistant mice cells as an HSF1 inhibitor to study its effects on viability and apoptosis of colorectal cancer cells as a heat shock protein 70 (HSP70) inhibitor to study its effects on glutamine-induced HSP70 and inflammatory mediator release... Read More | Products contentN665730Component24 T96 TStorageN665730ATPS V50 144 µL576 µL-20℃. Avoid freeze/thaw cycle.N665730B5×FA Reaction Buffer144 µL576 µL-20℃. Avoid freeze/thaw cycle.N665730C2×HiFidelity PCR Mix600 µL2×1.2 mL-20℃. Avoid freeze/thaw Products contentN665730Component24 T96 TStorageN665730ATPS V50 144 µL576 µL-20℃. Avoid freeze/thaw cycle.N665730B5×FA Reaction Buffer144 µL576 µL-20℃. Avoid freeze/thaw cycle.N665730C2×HiFidelity PCR Mix600 µL2×1.2 mL-20℃. Avoid freeze/thaw cycle.N665730DPPM48 µL192 µL-20℃. Avoid freeze/thaw cycle.* This kit is suitable for human genomic DNA library construction with a starting template DNA input of 50 ng. We also have transposase library construction kits for human genomic DNA starting at 5 ng and 1 ng, so it is recommended to use different kits for different starting amounts of DNA in order to obtain higher quality libraries. Products IntroductionThis kit is developed for Illumina's high-throughput sequencing platform and provides the enzyme premix system and reaction buffer for genomic DNA library construction, including all components except PCR primers. Compared with the traditional library construction kits, this kit adopts the new transposase method for library construction, which can complete DNA fragmentation, end repair and junction reaction in one simple enzymatic reaction, significantly reducing the amount of template, reducing the number of experimental steps, and shortening the time of library construction; it adopts the high-fidelity DNA polymerase for library enrichment, and the preference-free PCR amplification can expand the coverage area of the sequence, which can be used for efficient and effective sequencing. The use of high-fidelity DNA polymerase for library enrichment and preference-free PCR amplification broadens the coverage area of the sequence and enables efficient preparation of DNA libraries for Illumina's second-generation sequencing platform. The kit is suitable for DNA libraries with a starting template of 50 ng, and all reagents in the kit have been subjected to strict quality control and functional validation to maximize the stability and reproducibility of library construction. Product Features ● DNA fragmentation and junction ligation in one step.● Ultra-fidelity amplification minimizes amplification-preferred steps.Provide your own instruments, kits and consumables1. Magnetic frame: DynaMagTM-2 is recommended.2. DNA purification and recovery kit: It is recommended to use DNA purification and recovery kit by magnetic bead method.3. Library PCR primer kits: transposase method for second-generation sequencing multi-sample primer kits are recommended. 4. Anhydrous ethanol, deionized water (pH between 7.0 and 8.0).5. Reaction tubes: It is recommended to use low adsorption PCR tubes and 1.5 ml centrifuge tubes. Tips: It is recommended to use high quality filter tips to prevent contamination of kits and library samples. Pre-experiment Preparation and Important Notes1. Avoid repeated freezing and thawing of reagents.2. PCR products are easily contaminated due to improper operation, resulting in inaccurate results. It is recommended to isolate the PCR reaction system preparation area from the PCR product purification area, and to use special pipettes to clean the experimental areas at regular intervals.3. Bead purification: the beads should be equilibrated to room temperature before use, all operations on the beads should be carried out at room temperature, 80% ethanol should be dispensed freshly, the beads should be rinsed and dried until the surface is free of liquid reflections and has a frosted appearance, insufficient drying of the beads will cause ethanol residue that will affect the subsequent experiments, and over-drying of the beads will affect the efficiency of DNA recovery.4. The kit is suitable for human genomic DNA library construction, if the DNA sample is a PCR product, it should be ensured that its length>.500 bp, since transposases do not work on DNA ends, it is recommended to extend the PCR product by 50-100 bp at each end of the PCR product to avoid low coverage of the ends for sequencing.Sample PreparationDNA purity requirements: A260/A280 = 1.8-2.0. Sample DNA: dissolve in ultrapure water. DNA Quantification: Too much or too little DNA will affect the quality of the library. It is recommended to use Nano to test the purity of the genomic DNA and then use Qubit to test the concentration of the genome (do not use any absorbance-based assay for template quantification).Schematic diagram of DNA banking processprocedureDNA fragmentation, junction reaction1. Add the following reagents to a 200 µl PCR tube: 2. Mix by gently blowing with a pipette and centrifuge briefly so that all components are collected at the bottom of the tube.3. Place the above PCR tubes in the PCR instrument with the hot cap on and program the reaction as follows:DNA should be purified immediately after the fragmentation reaction has been performed and the transposase is still in a high state of activity.to prevent smaller library fragments due to DNA over-fragmentation. Purification of fragmentation productsWe recommend the use of the Century Magnetic Bead Method DNA Purification and Recovery Kit.1. CMPure should be equilibrated at room temperature for 30 min after shaking and mixing before use.2. Add 50 µl of magnetic beads equilibrated to room temperature to the fragmentation product, vortex and shake for 5 seconds, then let stand at room temperature for 5 minutes.3. Centrifuge briefly, place the tube on a magnetic rack to separate the beads from the supernatant solution until the solution is clear (approximately 3-5 minutes), carefully aspirate the supernatant and discard, avoiding contact with the beads that have bound the target DNA. Note: Do not discard the beads.4. Continue to keep the centrifuge tube fixed on a magnetic rack and add 200 µl of freshly prepared 80% ethanol to the centrifuge tube and allow to stand at room temperature for 30 seconds, carefully discarding the supernatant.Note: When adding ethanol, the liquid must not be blown directly onto the beads.5. Repeat step 4.6. Keep the centrifuge tube fixed on a magnetic rack and leave to dry at room temperature until the surface of the beads is slightly cracked, then add 23 µlddH2O to solubilize.Note: Do not over-dry the beads as this may affect the elution efficiency.7. Remove the tube from the magnetic rack, vortex to completely resuspend the beads, and allow to stand at room temperature for 5 minutes. Centrifuge briefly, place the tube on the magnetic rack until the solution is clear, and transfer 21 µl of supernatant to a new 200 µl PCR tube.PCR amplification Add the following reagents to the 200 µl PCR tube: Mix by gently blowing with a pipette and centrifuge briefly so that all components are collected at the bottom of the tube.3. Place the above PCR tubes in the PCR instrument with the hot cap on and program the reaction as follows:Selective recovery of library DNA fragmentsIt is recommended to use CombiVision Magnetic Beads DNA Purification and Recovery Kit for selective recovery of DNA fragments. When different sizes of DNA fragments are required, the amount of magnetic beads to be used is different, please refer to the attached table for the specific amount of magnetic beads to be used (if other brands of magnetic beads are used, you need to find out the optimal amount of magnetic beads to be used on your own).Note: Amplification products can also be fragment length sorted and purified using the Gum Recovery Kit. If there is no special requirement for library length distribution, the amplification products can also be purified without selective recovery of DNA fragments as described on page 6 of the manual.1. CMPure should be equilibrated at room temperature for 30 min after shaking and mixing before use.2. Transfer the PCR product to a 1.5 ml centrifuge tube, rehydrate to 100 µl and add several volumes of magnetic beads equilibrated to room temperature, vortex for 5 seconds and let stand at room temperature for 5 minutes.3. Centrifuge briefly, place the tube on a magnetic rack to separate the beads from the supernatant until the solution is clear, and carefully aspirate the supernatant and transfer it to a new 1.5 ml centrifuge tube.Note: Do not discard the top clear.4. Add several volumes of magnetic beads to the supernatant, vortex and shake for 5 seconds, then let stand at room temperature for 5 minutes.5. Centrifuge briefly, place the tube on a magnetic rack to separate the beads from the supernatant until the solution is clear, carefully aspirate the supernatant and discard it, avoiding contact with the beads that have bound the target DNA.Note: Do not discard the beads.6. Continue to keep the centrifuge tube fixed on a magnetic rack and add 200 µl of freshly prepared 80% ethanol to the tube and allow to stand at room temperature for 30 seconds, carefully discarding the supernatant.Note: When adding ethanol, the liquid must not be blown directly onto the beads.7. Repeat step 6 once.8. Keep the centrifuge tube fixed on a magnetic rack and leave to dry at room temperature until the surface of the beads is slightly cracked, add 20 µl of ddH2O to solubilize.Note: Do not over-dry the beads as this may affect the elution efficiency.9. Remove the centrifuge tube from the magnetic rack, vortex and oscillate to completely resuspend the beads, and let stand at room temperature for 5 minutes. Leave brieflycentrifuge, place the tube on a magnetic rack until the solution is clear, and transfer the supernatant solution to a new centrifuge tube. Table: Suggested amount of magnetic beads for different segment selection recoveryLibrary DNA fragment purificationWe recommend the use of the Century Magnetic Bead Method DNA Purification and Recovery Kit.1. CMPure should be equilibrated at room temperature for 30 min after shaking and mixing before use.2. 50 µl of magnetic beads equilibrated to room temperature were added to the PCR product, vortexed and shaken for 5 seconds, and then left to stand at room temperature for 5 minutes.3. Centrifuge briefly, place the tube on a magnetic rack to separate the beads from the supernatant solution until the solution is clear (approximately 3-5 minutes), carefully aspirate the supernatant and discard it, avoiding contact with the beads that have bound the target DNA. Note: Do not discard the beads.4. Continue to keep the centrifuge tube fixed on a magnetic rack and add 200 µl of freshly prepared 80% ethanol to the centrifuge tube and allow to stand at room temperature for 30 seconds, carefully discarding the supernatant.Note: When adding ethanol, the liquid must not be blown directly onto the beads.5. Repeat step 4.6. Keep the centrifuge tube fixed on a magnetic rack and leave to dry at room temperature until the surface of the beads is slightly cracked, add 25 µl of ddH2O to solubilize.Note: Do not over-dry the beads as this may affect the elution efficiency.7. Remove the tube from the magnetic rack, vortex to completely resuspend the beads, and allow to stand at room temperature for 5 minutes. Centrifuge briefly, place the tube on the magnetic rack until the solution is clear, and transfer the supernatant solution to a new tube.Library quality controlDetermination of library concentrationIn order to obtain high-quality sequencing results, accurate quantification of DNA libraries is required, and the first recommendation is to use Real-timePCR methods are used for absolute quantification of DNA libraries. Additionally, fluorescent dye methods such as the Qubit method or the fluorescent dye picogreen method can be used; do not use quantification methods based on absorbance measurements here. The following approximate formula can be used to convert the molar concentration of the DNA library. Average total length of librariesApproximate conversion formula Library fragment distributionThe prepared DNA libraries can be detected by agarose gel electrophoresis or Agilent 2100 Bioanalyzer.Range of segment length distributions... Read More | SHP2 protein degrader-2 (SHP2-D26) is a SHP2 protein PROTAC degrader. SHP2 protein degrader-2 reduces expression level of SHP2 in various cancer cells.In VitroSHP2 protein degrader-2 (SHP2-D26) achieves excellent degradation of SHP2 with the DC 50 (the concentration where 50% of the protein has beenSHP2 protein degrader-2 (SHP2-D26) is a SHP2 protein PROTAC degrader. SHP2 protein degrader-2 reduces expression level of SHP2 in various cancer cells.In VitroSHP2 protein degrader-2 (SHP2-D26) achieves excellent degradation of SHP2 with the DC 50 (the concentration where 50% of the protein has been degraded) values of 2.6 nM and 6.0 nM for MV4;11 and KYSE520 cells, respectively. MCE has not independently confirmed the accuracy of these methods. They are for reference only.Form:Solid... Read More | Tyrosine decarboxylase catalyzes the removal of the carboxyl group from tyrosine to produce tyramine and carbon dioxide. Pyridoxal 5'-phosphate is a necessary cofactor. By using the apoenzyme prepared from cells grown on a vitamin B6 deficient medium pyridoxal phosphate may be determined. The Tyrosine decarboxylase catalyzes the removal of the carboxyl group from tyrosine to produce tyramine and carbon dioxide. Pyridoxal 5'-phosphate is a necessary cofactor. By using the apoenzyme prepared from cells grown on a vitamin B6 deficient medium pyridoxal phosphate may be determined. The HOLOenzyme may be used to determine tyrosine, phenylalanine and dihydroxyphenylalanine either manometrically or colorimetrically.L-Tyrosine decarboxylase apoenzyme from Streptococcus faecalis has been used in a study to purify and characterize tyrosine decarboxylase and aromatic-L-amino-acid decarboxylase.L-Tyrosine decarboxylase apoenzyme from Streptococcus faecalis has also been used in a study to investigate the stereospecificity of sodium borohydride reduction of tyrosine decarboxylase... Read More |