| Description | Transferrin less the iron molecule. Like transferrin, apotransferrin has a physiological role in the transportation and distribution of iron among the body organs. It is also an important transport factor used in defined culture media. Purified to have less than 0.01% iron and an iron-binding Transferrin less the iron molecule. Like transferrin, apotransferrin has a physiological role in the transportation and distribution of iron among the body organs. It is also an important transport factor used in defined culture media. Purified to have less than 0.01% iron and an iron-binding capacity of 1.25 ug/mg.Apotransferrin is an important transport factor used in defined culture mediaHeat-treated at 60ºC for 10 hours, the apotransferrin is lyophilized after having been filtered using a 0.1 micron filter. Readily soluble at 1% in water, the product has an endotoxin level less than 1 EU/mg by LAL testing, a bioburden of less than 10 CFU/mg and no mycoplasma contamination... Read More | C1q separated from C1r and C1s and from other stabilizing proteins tends to aggregate easily. Because it was isolated and studied in numerous research laboratories, many buffers have been used to stabilize concentrated C1q and prevent aggregation. About half of the scientists prefer high salt and C1q separated from C1r and C1s and from other stabilizing proteins tends to aggregate easily. Because it was isolated and studied in numerous research laboratories, many buffers have been used to stabilize concentrated C1q and prevent aggregation. About half of the scientists prefer high salt and the other prefer 40% glycerol in the storage buffer.C1q is purified from pooled normal human plasma. C1q is part of the C1 complex and this complex is the first complement component in the cascade referred to as the classical pathway of complement. C1 is actually a non-covalent assembly of three different proteins (C1q, C1r, and C1s) bound together in a calcium-dependent complex. C1q has six extended arms with domains at the end of each arm that bind to the Fc domains of immunoglobulins. When antibodies bind to antigens forming immune complexes they cluster allowing two or more of its six arms of C1q to bind to the Fc domains of antibodies such as IgG or IgM. The binding of multiple arms to immune complexes causes the two C1r proteins in the complex (protease zymogens) to auto-activate producing two C1r proteases that cleave and activate the two C1s protease zymogens in the complex. Activated C1s cleaves complement component C4 releasing C4a and initiating covalent attachment of C4b to the activating surface. Activated C1s also cleaves C2 and the larger fragment of C2 binds to the surface-attached C4b forming C4b,C2a which is the C3/C5 convertase of the classical pathway.Extinction Coeff.A₂₈₀ nm = 0.68 at 1.0 mg/ml for pure C1q Molecular weight:410,000 Da (18 chains)Preservative:None, 0.22 µm filtered.Source:Normal human serum (shown by certified tests to be negative for HBsAg, HTLV-I/II, STS, and for antibodies to HCV, HIV-1 and HIV-II).Physical Characteristics & StructureC1q is a high molecular weight complex of 18 polypeptide chains. Each of the six arms of C1q contains three chains, an A chain (26,000 daltons), a B chain (25,000 daltons) and a C chain (24,000 daltons). The three chains are coiled into a collagen-like triple helix over approximately half their length. Half of this collagen region forms a central core where all 18 chains come together. The chains are joined in this core by disulfides in the pattern A-B and C-C. There is a bend in the center of the collagen region allowing the arms to extend away from each other. Globular heads at the far ends of the collagen arms possess binding sites for Fc domains of immunoglobulins. C1 complex is composed of one C1q molecule (410,000 daltons), two C1r molecules (92,000 daltons) and two C1s molecules (86,000 daltons). The complex is stable in the presence of calcium, but easily dissociates if calcium is removed. When C1 is activated the C1r and C1s subunits are each cleaved into two chain molecules due to proteolytic activation. Thus, the SDS gel pattern of C1 is very complex. Function The biological functions of C1q are described above in the General Description and Physical Characteristics sections. C1q functional activity may be assayed using C1q-depleted serum and EA cells. These assays are extremely sensitive to C1q typically yielding 50% lysis with less than 2 ng C1q in assays measuring the lysis of EA cells. AssaysThe unit of classical pathway activity is the CH50. A similar unit, the C1qH50, is used to quantitate the activity of C1q. A C1qH50 unit is the amount of functional C1q needed to lyse 50% of 3×10^7 EA cells (antibody-sensitized sheep erythrocytes) when that amount of C1q is incubated with 5-20 µL of C1q-Dpl in GVB++ in a total volume of 500 µL for 30 min at 37℃. This amount of C1q indicates the sensitivity of the assay for C1q which is typically about 1 ng C1q with 10 µL C1q-Dpl. See the Certificate of Analysis for lot specific values.ApplicationsC1q is used to coat ELISA plates to capture and quantitate immune complexes in clinical samples. A number of commercial companies sell diagnostic kits for immune complex detection and quantitation. These kits are based on the ability of C1q to bind well to immune complexes, but to not bind significantly to monomeric immunoglobulins. GeneticsThe EMBL/Genbank cDNA accession numbers are: C1q A chain (P02745), C1q B chain (P02746), and C1q C chain (P02747). The genes for C1q chains A, B and C are all located on chromosome 1p in the order A-C-B. DeficienciesDeficiencies of each of the three components of C1 have been found. Patients lacking C1q generally have immune-complex-mediated renal disease and skin lesions. Like all patients lacking early classical pathway components C1q deficient individuals are prone to systemic lupus erythrematosis (SLE) and recurrent pyogenic infections. They lack classical pathway function and may or may not exhibit C1q antigen in blood.DiseasesSee section titled Deficiencies above. Precautions/Toxicity/HazardsThis protein is purified from human serum and therefore precautions appropriate for handling any blood-derived product must be used even though the source was shown by certified tests to be negative for HBsAg, HTLV-I/II, STS, and for antibodies to HCV, HIV-1 and HIV-II... Read More | EPOCROSTM is a reactive polymer with an oxazoline group on the side chain and is used as a cross-linking agent for water-based resins. Among the water-based polymers developed to address environmental issues and the increasing use of water-based products due to VOC regulations and desolventing, the EPOCROSTM is a reactive polymer with an oxazoline group on the side chain and is used as a cross-linking agent for water-based resins. Among the water-based polymers developed to address environmental issues and the increasing use of water-based products due to VOC regulations and desolventing, the EPOCROSTM WS series is a “water-soluble type” with the following structure.Features and PropertiesHigher reactivity than water-based epoxy, melamine, blocked isocyanateVOC free (EPOCROS™ WS-300 and EPOCROS™ WS-700)High crosslinking density with a small amount addedOne-pack type with long usage timeImproves water resistance, solvent resistance, heat resistance, and the strength of films, etc.Adhesion-imparting possible to PET, OPP, PVC, etc.Fast dryingLow toxicity (Ames Test: Negative, Primary Skin Irritation Test: No irritation)WS Series Product LineupApplicationsNonwoven fabric bindersPigment printingCoatings (metals, films, leather)Paint and coatings, Primers (plastics, building materials, vehicles)AdhesivesMethodASSAY for Product Code DILW:One unit equals a decrease in absorbance of 1.0 per minute at 25°C at pH 7.5 with 2,6-dichlorophenolindophenol as the chromogen.Reagents0.2 M Tris⋅HCl buffer, pH 7.50.006 M NADH. Prepare fresh daily.0.0012 M Dichlorophenolindophenol (DCPIP) Prepare fresh daily.EnzymePrepare a 10 mg/ml solution of enzyme in 0.2 M Tris⋅HCl, pH 7.5.Dilute further immediately before use to give ΔA/min of 0.15-0.20.ProcedureAdjust spectrophotometer to 600 nm and 25°C.Pipette into cuvettes as follows:Mix quickly and measure the decrease in absorbance at 600 nm for 2-3 minutes.Determine the ΔA/min. from the initial linear portion of the curve. (Use portion of curve from t=0 to t=1 minute; the rate is linear for 1/2 to 1 minute.)Calculation... Read More | ProductsThis product is a high purity genomic DNA extract from 293T cells, agarose gel (0.7%) electrophoresis showed that the size of the DNA extract is more than 15Kb, and basically no degradation, the product is ultimately preserved in TE Buffer, which can be widely used in molecular biology ProductsThis product is a high purity genomic DNA extract from 293T cells, agarose gel (0.7%) electrophoresis showed that the size of the DNA extract is more than 15Kb, and basically no degradation, the product is ultimately preserved in TE Buffer, which can be widely used in molecular biology experiments, such as PCR, enzyme digestion, hybridization, microarray analysis, and other molecular biology experiments.The product was quantified using NanoDrop One at a concentration of 200 ng/µL.Preparation and precautions before useLong-term storage at -20˚C is recommended. Before use, the bottle should be removed from the refrigerator and equilibrated to room temperature and centrifuged before opening the cap for use. Samples should be restored to the sealed state as soon as possible after opening.How to use (take qPCR experiment as an example)1. Amplification template preparationThe samples to be detected were diluted with TE (10 mM Tris-Cl, pH 8.0,1 mM EDTA), and the concentration after dilution was as close as possible to the range of 0.05-10 ng/µL. The samples were placed on ice at 4°C and set aside.2. Standard dilution: according to the following table, firstly dilute Human DNA Standard 1 (100ng/uL) with TE to make 5 different concentrations of standards according to the table below. 10ng/µL of DNA Standard 1 (Std. 1) can be stored stably at -20℃ for 1 month; Std2-5 can only be used on the same day, and should be placed at 4℃ or on ice when not in use for the time being after preparation. When not used temporarily after preparation, it should be stored at 4℃ or on ice.styleCorresponding concentration (ng/µL)Minimum dilution volume (in µL)Std.11010 [100 ng/µL DNA Standard 1] + 90 TEStd.22.520 [Std. 1] +60 TEStd.30.62520 [Std. 2] +60 TEStd.40.1562520 [Std. 3] +60 TEStd.50.039062520 [Std. 4] +60 TE3. qPCR reaction system preparationThe cryopreserved reagents to be used were completely thawed and mixed by inversion several times before preparation, and then briefly centrifuged and prepared for use. 20 µL of the base reaction system was as follows.The base reaction system for 20 µL was as follows:reagents20µL reaction system2×qPCRMix10µLPrimerMixXµLProbeMixXµLTemplate4µLddH2OMake up to 20 µLNote: High Rox model: add 1 µL of 50×High Rox per 50 µL of reaction system; Low Rox model: add 1 µL of 50×High Rox per 500 µL of reaction system.Usually, better results can be obtained with a primer concentration of 0.2 µM, and 0.1-1.0 µM can be used as a reference for setting the range.The concentration of the probe used is related to the fluorescent quantitative PCR instrument used, the type of probe, and the type of fluorescent labeling substance, so please refer to the manual of the instrument or the specific requirements for the use of each fluorescent probe for the adjustment of the concentration during actual use.Prepare a sufficient amount of reaction system mixture as required. After the reaction system has been prepared and mixed thoroughly, add 16 µL per well to the reaction wells. Then add the prepared standard and diluted sample into the corresponding reaction wells, the volume of addition is 4µL/well. TE was added to the blank control tube, and the same amount of TE was added at 4 µL/well.It is recommended to use 20 µL for the reaction, if you need to perform a smaller system reaction, reduce the system components in equal proportion.4. qPCR reaction programThe following is an example of our GoldStar Probe Mixture reaction conditions, which should be improved and optimized according to the PCR product template, primer structure and target fragment size.movetemptimingcirculatepremutability95°C10min1denaturation95°C10sec55Annealing/Extension60°C30sec5Data analysis1. Standard curve productionThe standard curve was plotted with reference to the Excel sheet for data processing. The correlation coefficient R2 of the standard curve should not be lower than 0.98, and the slope should be between -3.1 and -3.6 when the Ct value is the vertical coordinate. If the parameters of the standard curve are unreasonable, it is recommended to repeat the experiment... Read More | Inquire |