| Description | EnzymoPure™Q M-MLV Reverse Transcriptase uses single-stranded RNA or DNA in the presence of a primer to synthesize a complementary DNA strand with high fidelity, sensitivity, and specificity. It is a modified, optimized reverse transcriptase particularly suitable for qPCR analysis. The EnzymoPure™Q M-MLV Reverse Transcriptase uses single-stranded RNA or DNA in the presence of a primer to synthesize a complementary DNA strand with high fidelity, sensitivity, and specificity. It is a modified, optimized reverse transcriptase particularly suitable for qPCR analysis. The EnzymoPure™Q M-MLV Reverse Transcriptase contains RNase H enzyme activity that can specifically degrade the RNA strand of an RNA-DNA hybrid, enabling the subsequent synthesis of second-strand cDNA.EnzymoPure™Q M-MLV Reverse Transcriptase, a commonly used high-quality reverse transcriptase, is widely used in the synthesis of first-strand cDNA using total RNA or mRNA templates, and is particularly suitable for qPCR and one-step qRT-PCR analysis. This product is also applicable for conventional PCR, synthesis of second-strand cDNA and construction of cDNA library, and cloning of target genes. It can also be used for DNA probe labeling with fluorescence, biotin, digoxin, or isotope through reverse transcription reaction, or for RNA studies by primer extension.Please refer to Figure 1 for the qPCR analysis of the GADPH gene in HEK293T cells using the cDNA templates obtained by the EnzymoPure™Q M-MLV reverse transcriptase.Figure 1Source：Recombinant reverse transcriptase expressed in E. coli.Definition of enzyme activity unit: One unit is defined as the amount of enzyme that incorporates 1 nmol of dTTP into acid-precipitable material in 10min at 37℃ using poly(A)•oligo(dT)12-18 as template-primer. Reaction system: 50mM Tris-HCl (pH8.3), 75mM KCl, 3mM MgCl2, 10mM DTT, 0.5mM [3H]-dTTP, and 0.4mM polyA•oligo(dT)12-18.Purity: This product is free from DNA endonuclease, exonuclease, phosphatase, and RNase, and can meet the requirements of conventional reverse transcription.Storage buffer: 20mM Tris-HCl (pH7.5), 150mM NaCl, 0.1mM EDTA, 1mM DTT, 0.01%(v/v) NP-40, and 50%(v/v) glycerolInactivation or inhibition：RT Q M-MLV Reverse Transcriptase can be inactivated by incubation at 80℃ for 10 minutes, or inhibited by EDTA and EGTA chelators, inorganic phosphates or pyrophosphates, and polyamine.The concentration of M-MLV is 200U/µl. When 20µl of reverse transcription reaction volume is used, D7188S, D7188M, and D7188L are sufficient for 50, 250, and 1000 reactions, respectively. provides a variety of reverse transcriptase. To select the best one for your needs, please refer to the following webpage:http://www.aladdin-e.com/support/reversetranscriptase.htmPrecautions：Please refer to the instructions for reverse transcription of RNAs with high GC content.This product is for R&D only. Not for drug, household, or other uses.For your safety and health, please wear a lab coat and disposable gloves during the operation.Instructions for Use：1. First-strand cDNA synthesisa. Set up the following reaction on ice or at room temperature. RNase Inhibitor and dNTP mix can be purchased from SYBR Green qPCR Mix (2X), SYBR Green qPCR Mix (2X, Low ROX), and SYBR Green qPCR Mix (2X, High ROX) are for conventional qPCR analysis with SYBR Green fluorescent dye. Probe qPCR Mix (2X), Probe qPCR Mix (2X, Low ROX), and Probe qPCR Mix (2X, High ROX) are for qPCR analysis with Taqman Probe.b. Perform qPCR analysis following the instructions of the corresponding qPCR kit.3. For other applications such as primer extension and probe labeling, please refer to references related to M-MLV reverse transcriptase.FAQ:1. The reverse transcription product of total RNA is invisible after electrophoresis.It is a normal phenomenon, because the amount of RNA template is low, and the amount of reverse transcription products in different sizes is even lower. 2. No specific product is amplified from the reverse transcription product.a. To exclude the problem of PCR reaction system or reverse transcription product, use gene-specific primers to amplify internal reference genes, such as actin and GAPDH. If reference genes can be amplified, but not the target gene, it indicates primers of the target gene are not well designed. b. Template RNA may be degraded. The integrity of total RNA can be checked by agarose gel or on-chip electrophoresis. Intact total RNA exhibits sharp, clear 28S and 18S rRNA bands, and the 28S rRNA band should be approximately twice as intense as the 18S rRNA band. A ratio less than 2 indicates the degradation of total RNA and new total RNA should be prepared. c. RNA samples may contain some components that inhibit the activity of reverse transcriptase. Those contaminants include phenol, SDS, EDTA, guanidine salts, phosphoric acid, pyrophosphoric acid, polyamine, spermidine, etc, which can be removed effectively by column purification or precipitation, washing, and redissolution. Total RNA extracted by Zol or Trizol produced by can fully meet the requirements of reverse transcription.d. Insufficient templates for reverse transcription. When DNase I is used to remove the residual DNA in the RNA sample prior to reverse transcription and is subjected to heat-inactivation, EDTA should be added to the RNA sample at a final concentration of 2.5mM to protect RNA from degradation under high temperature. Additionally, to amplify a specific gene, it is necessary to extract RNA from tissues in which the target gene is highly expressed. e. An inappropriate primer is used for reverse transcription. Random hexamer instead of Oligo(dT)18 should be used for the reverse transcription of bacterial total RNA which does not have poly(A) tails. Gene-specific primers used for reverse transcription must be well-designed... Read More | Protein Purity≥85% by SDS PAGEExtinction CoeffA280 nm = 10.16 at 1.0 mg/ml for pure C3Molecular Weight187,000 Da (2 chains)General DescriptionRat C3 is purified from pooled normal rat serum. C3 is central to the activation of all three pathways of complement activation (Law, S.K.A. and Reid, KProtein Purity≥85% by SDS PAGEExtinction CoeffA280 nm = 10.16 at 1.0 mg/ml for pure C3Molecular Weight187,000 Da (2 chains)General DescriptionRat C3 is purified from pooled normal rat serum. C3 is central to the activation of all three pathways of complement activation (Law, S.K.A. and Reid, K.B.M. (1995)). Initiation of each pathway generates proteolytic enzyme complexes (C3 convertases) which are bound to the target surface. These enzymes cleave a peptide bond in C3 releasing the anaphylatoxin C3a and activating C3b. For a brief time (~60 µs) this nascent C3b is capable of reacting with and covalently coupling to hydroxyl groups on the target surface. Carbohydrates are the favored target, but protein hydroxyls and amino groups also react. This process of tagging the target surface with C3b is called opsonization. The reactive site in nascent C3b is a thioester (Tack B.J., et al. (1980); Pangburn M.K. and MüllerEberhard H.J. (1980)) and C3b is linked to the target through a covalent ester bond (an amide bond is formed if C3b is attached to amino groups). Most of the C3 activated during complement activation never attaches to the surface because its thioester reacts with water forming fluid phase C3b which is rapidly inactivated by factors H and I forming iC3b. Surface-bound C3b is necessary in all three pathways for efficient activation of C5 and formation of C5b-9 complexes that lyse the target cell membrane. Surface-bound C3b and its breakdown products iC3b and C3d are recognized by numerous receptors on lymphoid and phagocytic cells which use the C3b ligand to stimulate antigen presentation to cells of the adaptive immune system. The end result is an expansion of target-specific B-cell and T-cell populations.Physical Characteristics & StructureThe calculated molecular weight of rat C3 based on its amino acid sequence is 184,111daltons (without the signal peptide) and is similar to that of human C3 (185,000 daltons).The molecular weight of rat C3 as determined by SDS/polyacrylamide gel electrophoresis has been reported by Daha, M.R. et al., (1979) to be 187,000 daltons composed of two disulfide linked chains, alpha chain (123,000 daltons) and beta chain (76,000 daltons). The extinction coefficient of rat C3 (E1%/280nm = 10.16) is calculated based on its amino acid sequence using ProtParam and assumes all pairs of Cys residues form cystines (i.e. a pair of cysteine molecules are joined by a disulfide bond). The theoretical pI of rat C3 is 6.12. The normal plasma concentration of C3 inWistar rats has been reported to be 0.581mg/ml (Daha, M.R. et al., (1979)).FunctionThe biological functions of C3 are described above in the General Description section.GeneticsRat C3 chromosome location 9. The NCBI Gene ID number for rat C3 is 24232 and UniProt accession number is P01026.Precautions/Toxicity/HazardsThis protein is purified from animal plasma/serum and therefore precautions appropriate for handling any animal blood-derived product must be used.ReferencesLaw, S.K.A. and Reid, K.B.M. (1995) Complement 2nd Edition (ISBN 0199633568) Oxford University Press, Oxford.Tack BF, Harrison RA, Janatova J, Thomas ML, Prahl JW. (1980) Evidence for presence of an internal thiolester bond in third component of human complement. Proc Natl Acad Sci U S A. 77:5764-8.Pangburn M.K. and Müller-Eberhard H.J. (1980) Relation of putative thioester bond in C3 to activation of the alternative pathway and the binding of C3b to biological targets of complement. J Exp Med. 152:1102-14.Daha MR, Stuffers-Heiman M, Kijlstra A and Van ES LA. (1979) Isolation and characterization of the third component of rat complement. Immunology 36:63-70... Read More | EPOCROSTM is a reactive polymer with an oxazoline group on the side chain and is used as a cross-linking agent for water-based resins. Among the water-based polymers developed to address environmental issues and the increasing use of water-based products due to VOC regulations and desolventing, the EPOCROSTM is a reactive polymer with an oxazoline group on the side chain and is used as a cross-linking agent for water-based resins. Among the water-based polymers developed to address environmental issues and the increasing use of water-based products due to VOC regulations and desolventing, the EPOCROSTM WS series is a “water-soluble type” with the following structure.Features and PropertiesHigher reactivity than water-based epoxy, melamine, blocked isocyanateVOC free (EPOCROS™ WS-300 and EPOCROS™ WS-700)High crosslinking density with a small amount addedOne-pack type with long usage timeImproves water resistance, solvent resistance, heat resistance, and the strength of films, etc.Adhesion-imparting possible to PET, OPP, PVC, etc.Fast dryingLow toxicity (Ames Test: Negative, Primary Skin Irritation Test: No irritation)WS Series Product LineupApplicationsNonwoven fabric bindersPigment printingCoatings (metals, films, leather)Paint and coatings, Primers (plastics, building materials, vehicles)AdhesivesMethodASSAY for Product Code DILW:One unit equals a decrease in absorbance of 1.0 per minute at 25°C at pH 7.5 with 2,6-dichlorophenolindophenol as the chromogen.Reagents0.2 M Tris⋅HCl buffer, pH 7.50.006 M NADH. Prepare fresh daily.0.0012 M Dichlorophenolindophenol (DCPIP) Prepare fresh daily.EnzymePrepare a 10 mg/ml solution of enzyme in 0.2 M Tris⋅HCl, pH 7.5.Dilute further immediately before use to give ΔA/min of 0.15-0.20.ProcedureAdjust spectrophotometer to 600 nm and 25°C.Pipette into cuvettes as follows:Mix quickly and measure the decrease in absorbance at 600 nm for 2-3 minutes.Determine the ΔA/min. from the initial linear portion of the curve. (Use portion of curve from t=0 to t=1 minute; the rate is linear for 1/2 to 1 minute.)Calculation... Read More | Purity: >90%, by SDS-PAGE visualized with Coomassie® Blue Staining.Description：CNN1 is a member of the calponin family. CNN1 is a thin filament-associated protein which is involved in the regulation and modulation of smooth muscle contraction. CNN1 is able to bind to actin, calmodulinPurity: >90%, by SDS-PAGE visualized with Coomassie® Blue Staining.Description：CNN1 is a member of the calponin family. CNN1 is a thin filament-associated protein which is involved in the regulation and modulation of smooth muscle contraction. CNN1 is able to bind to actin, calmodulin, troponin C and tropomyosin. Prevention of actomyosin Mg-ATPase activity is a result of interaction between calponin and actin... Read More | SHP2 protein degrader-2 (SHP2-D26) is a SHP2 protein PROTAC degrader. SHP2 protein degrader-2 reduces expression level of SHP2 in various cancer cells.In VitroSHP2 protein degrader-2 (SHP2-D26) achieves excellent degradation of SHP2 with the DC 50 (the concentration where 50% of the protein has beenSHP2 protein degrader-2 (SHP2-D26) is a SHP2 protein PROTAC degrader. SHP2 protein degrader-2 reduces expression level of SHP2 in various cancer cells.In VitroSHP2 protein degrader-2 (SHP2-D26) achieves excellent degradation of SHP2 with the DC 50 (the concentration where 50% of the protein has been degraded) values of 2.6 nM and 6.0 nM for MV4;11 and KYSE520 cells, respectively. MCE has not independently confirmed the accuracy of these methods. They are for reference only.Form:Solid... Read More |