Description | The MPC-325 System consists of the MPC-200 controller and one to four MP-225 micromanipulators
Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become space and/or cost prohibitive. The MPC-200 is the solution you have been The MPC-325 System consists of the MPC-200 controller and one to four MP-225 micromanipulators
Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become space and/or cost prohibitive. The MPC-200 is the solution you have been asking for. A single controller capable of running 2 manipulators! Sutter Instrument has taken the simplicity of the MP-225 controller and expanded it to run two manipulators from a single controller/ROE. The MPC-200 works with one or two of our world-renowned mechanicals, the MP-285 (MPC-385), the MP-225 (MPC-325) or the narrow format MP-865 (MPC-365).
If two manipulators aren't enough, a second controller can be daisy chained to allow the single ROE-200 to move up to four manipulators. Thus the system can be easily expanded to control highly sophisticated experiments.... Read More | The MP-225 is one of the newer members in the Sutter Instrument micromanipulator line. Production and design changes have allowed us to produce a motorized manipulator that is a more affordable alternative to the industry standard MP-285. While the MP-225 feature set is less comprehensive than the The MP-225 is one of the newer members in the Sutter Instrument micromanipulator line. Production and design changes have allowed us to produce a motorized manipulator that is a more affordable alternative to the industry standard MP-285. While the MP-225 feature set is less comprehensive than the MP-285, it includes the most popular features with a user interface that is simpler to use. The mechanical design utilizes a miniature stepper motor and integral anti-backlash gear head. Pre-loaded ball bearing slides provide smooth movement throughout the 25mm of travel. The controller uses low-noise, linear-drive output circuitry identical to that found in the MP-285. The methodology for mounting pipette holders and headstages used with the MP-285 has been maintained in the MP-225 to allow for cross compatibility.
The MP-225 is designed primarily for positioning patch and intracellular recording pipettes. We have retained and refined the features most desired for this type of work. An extended version of the popular rotary optical encoder (ROE) is the sole input device available with the MP-225. Like the MP-285, the manipulator has a synthetic 4th axis for diagonal advancement of the pipette; 16 different angles are selectable via DIP switches. Speed and resolution of movement are easily selected with a multiple position thumbwheel, allowing fast/coarse movement and slow/ultra-fine movement in 10 increments. Two commonly used robotic movements have been incorporated for user convenience. A single button press can initiate a move to a Home position for pipette exchange or to a user defined Work position for quick location of the pipette near the recording location.
A display on the ROE gives position location. As all controls are located on the ROE, the controller can be moved to a less accessible area of your setup and does not need to occupy prime space in an equipment rack.
As always, our technical support team is available to address your particular needs and answer all questions before and after your purchase.
Features: MP-225
- Highly stable for experiments intolerant of pipette drift.
- Submicron (62.5nm) minimal resolution for fine movement.
- Convenient thumbwheel selects resolution/speed of movement.
- 25mm of motorized travel on all three axes.
- 4th axis for coaxial movement of pipette, angle selected by DIP switches on ROE.
- ROE button press actuates move to Home position for pipette exchange.
- ROE button press actuates move to Work position near recording location.
- Continuous display (in microns) of axes positions located on ROE.
- DIP switches on ROE select direction of movement produced by turn of ROE knob.
- Modularized, compact design easily adaptable to your setup.
- Mounting adapters included with manipulator.
... Read More | Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become space and/or cost prohibitive. The MPC-200 is the solution you have been asking for. A single controller capable of running 2 manipulators! Sutter Instrument has taken the Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become space and/or cost prohibitive. The MPC-200 is the solution you have been asking for. A single controller capable of running 2 manipulators! Sutter Instrument has taken the simplicity of the MP-225 controller and expanded it to run two manipulators from a single controller/ROE. The MPC-200 works with one or two of our world-renowned mechanicals, the MP-285 (MPC-385), the MP-225 (MPC-325) or the narrow format MP-265 (MPC-365). The controller is self-detecting so there is no need for manual configuration of the components.
If two manipulators aren't enough, a second controller can be daisy chained to allow the single ROE-200 to move up to four manipulators. Thus the system can be easily expanded to control highly sophisticated experiments.
The Sutter MPC-200 is electrically quiet. Unlike the competition, our multi-unit controller employs linear output circuitry. Sutter adds additional manipulators to the same controller without requiring potentially noisy chopper drives.
Faster automated pipette exchange. The MPC-200 has faster “Home” and “Work Position” moves for quicker pipette exchange. Automation is set up and run via the same interface used in the MP-225 controller; however, the speeds of the automated movement are much faster.
Accelerated manual mode. For users who prefer manual pipette exchange we have added “Accelerated Mode” to the ROE. Using Accelerated Mode, the user can make quick manual moves in and out of a setup. Accelerated Mode amplifies the speed attainable in a manual move by smoothly accelerating to the maximum speed during sustained, fast turns of the ROE. Accelerated movement ends as soon as the user stops turning the knob. This mode can be fully disabled for those who feel the need for direct control of the pipette.
To provide the ultimate in flexibility, the MPC-200 can be purchased separately or in one of several basic systems such as the MP-385 or the MP-325. Additional component pieces can be added at any time, allowing the user to develop a system tailored to his or her particular needs. Features: MPC-200 and ROE-200 - Single controller and ROE will run two stepper motor drive manipulators
- Self-detecting, daisy-chain capability allows control of four manipulators from one ROE-200
- User-friendly interface: single button access to all major functions
- New Accelerated Mode for fast, manual manipulator movement
- Easy toggle selection of Mode (speed/resolution, pulsed diagonal, Accelerated Mode)
- Display indicates X, Y, Z coordinates, Mode, active manipulator
- Robotic Home and Work Position moves for easy automated pipette exchange
- Faster robotic moves than previous versions
- Definable 4th axis for coaxial pipette movement, angle selected by DIP switches
- Simple USB interface
- Toggle switch selects which manipulator is connected to input device
- LED and display indicate active manipulator
- Low-drift mechanical stability
... Read More | The QUAD® motorized micromanipulator is easy to use and features four independent axes. Each axis has a 25mm range of motion, a digital display of position and an ROE control. The compact, intuitive controller takes up minimal bench space, is fan free and is easy to use. Three axes provide the X, Y,The QUAD® motorized micromanipulator is easy to use and features four independent axes. Each axis has a 25mm range of motion, a digital display of position and an ROE control. The compact, intuitive controller takes up minimal bench space, is fan free and is easy to use. Three axes provide the X, Y, Z-orthogonal motion typical of most motorized micromanipulators. In the QUAD, Sutter introduces a true fourth axis to move the electrode coaxially at exactly the desired angle of approach. The fourth axis has 30mm of travel that significantly extends the range of travel for the system.
Features:- Four independent axes - 30mm travel in diagonal for coaxial pipette movement, 25mm travel in X, Y and Z
- Sub-micron 100nm resolution
- True diagonal assures coaxial movement
- Quiet mode eliminates electrical noise
- Display indicates coordinates in relative or absolute
- User-friendly, fanless compact controller with ROE preserves bench space
- Push button control of multiple functions - WORK, HOME, LOCK, PULSE and RELATIVE
- Robotic HOME and WORK position moves for easy automated pipette exchange
- Suited for in vivo electrophysiological recording
- USB interface for computer control
... Read More | The TRIO™-245 from Sutter Instrument is a highly stable 3-axis manipulator with 25 mm of travel on each axis. The TRIO's synthetic 4th axis can be set in software as any angle between 0 and 90 degrees for diagonal movement. Based on a lead-screw design with a smaller overall size and footprintThe TRIO™-245 from Sutter Instrument is a highly stable 3-axis manipulator with 25 mm of travel on each axis. The TRIO's synthetic 4th axis can be set in software as any angle between 0 and 90 degrees for diagonal movement. Based on a lead-screw design with a smaller overall size and footprint than most manipulators, the TRIO-245 is ideal for setups where space is limited.
The TRIO-245 controller employs a combination of state-of-the-art software and mechanical design that eliminates the need for the motor to remain powered on during recording, thus eliminating the heating effects of the motors and giving us the electrically quietest manipulators in the industry. This stability ensures that Sutter manipulators will not drift in the middle of experiments.... Read More |