| Description | The classic micromanipulator developed by Sir Huxley many years ago is still considered by many investigators to be the finest manual micromanipulator available. The MP-85 offers the advantage of a very large range of movement with its built-in coarse manipulator and precise submicron movement with The classic micromanipulator developed by Sir Huxley many years ago is still considered by many investigators to be the finest manual micromanipulator available. The MP-85 offers the advantage of a very large range of movement with its built-in coarse manipulator and precise submicron movement with the fine controls. Coarse positioning is achieved with a three axis manipulator mounted on top. The ultrafine positioning is accomplished with the large micrometers mounted on the base. These micrometers provide smooth, precise movement through a 10:1 reduction mechanism.
The brass and stainless steel construction of the MP-85 makes for a very heavy and solid micromanipulator with excellent damping properties. This exceptionally stable design is ideal for patch clamp recording, intracellular recording, or any other application that is intolerant of drift.
Please contact Sutter Instrument for any additional information on the suitability and use of the MP-85 micromanipulator for your specific application. Features: MP-85
Dual springing of the moment arms to insure zero backlash and zero torsion.
The micromanipulator is mounted on a precision rotating base featuring a positive stop and lock.
The coarse movement is an all cross-roller bearing design consisting of coarse X, Y, and Z with an additional fine X motion.
The micromanipulator can be ordered in either a right or left handed version.
Options: MP-85
Fifteen degree stackable wedges for tilting the manipulator.
A set of three magnetic feet for increased stability.
One inch thick, chrome plated, solid brass riser blocks.
The MP-85 is chrome-plated and anodized to prevent corrosion. The J.R. Wall designed rotating base is machined from solid stainless steel with a brass spindle; a thin Teflon washer provides for the bearing surface. ... Read More | Used in complex experiments in conjunction with our other micromanipulators, or as a stand alone unit in a teaching environment, the MM-33 is available separately for those wishing a small, practical instrument in applications not requiring submicron accuracy.
The MM-33 is the right choice for Used in complex experiments in conjunction with our other micromanipulators, or as a stand alone unit in a teaching environment, the MM-33 is available separately for those wishing a small, practical instrument in applications not requiring submicron accuracy.
The MM-33 is the right choice for tight environments which require maximum versatility within a small space. The optional rotating base and tiltable X-axis provide even further flexibility.
Stainless steel cross-loaded roller bearings are designed to offer low friction and smooth linear motion with a minimum of side play. The pre-loaded rollers are set at 90 degrees to the hardened steel guides ensuring constant contact and accuracy. This precise rack and pinion drive gives stable, drift free movement with minimal backlash. The controls are placed one above the other which makes for less hand movement and easier positioning. The scales for all axes are calibrated in 0.10mm increments and the fine micrometer adjustment for the X-axis thrust is calibrated at 0.01mm with estimates to 5µm.
The optional rotating base extends the utility of the MM-33 by providing two additional rotating planes. The rotation in the horizontal plane (approximately 120 degrees) has a positive stop, quick release mechanism for fast insertion and removal of pipettes. The second rotating axis allows the MM-33 to be tilted in a vertical plane from 0 to 70 degrees.
The optional tiltable X-axis allows the fine axis to be tilted up to 45 degrees. An optional vertical lock is also available for locking the position of the vertical axis. These options should be ordered at the time of purchase since the modifications are factory installed.
Individual excursions are as follows:
X-axis coarse movement: 37mm
X-axis fine movement: 10mm
Y-axis horizontal movement: 20mm
Z-axis vertical movement: 20mm Features: MM-33
Compact design allows use in tight environments.
Cross-loaded roller bearings for smooth, low friction movement.
Rack and pinion drive gives stable movement with minimal backlash.
Options: MM-33A
Rotating base allows horizontal rotation and vertical tilting.
Rotating base allows horizontal rotation and vertical tilting.
Vertical axis lock. ... Read More | Our new MP-265/M "narrow format" mechanical is designed especially for patch-slice manipulator systems that require more than 2 or 3 pipettes. Coupled with our multi-manipulator controller, MPC-200, users have the ability to easily build up multi-manipulator MPC-365 systems for positioning multiple Our new MP-265/M "narrow format" mechanical is designed especially for patch-slice manipulator systems that require more than 2 or 3 pipettes. Coupled with our multi-manipulator controller, MPC-200, users have the ability to easily build up multi-manipulator MPC-365 systems for positioning multiple recording and stimulating pipettes.
The MP265/M mechanical builds on our existing manipulator line in several ways. First, narrow format means more manipulators can be grouped around a recording chamber. A long throw (25 mm) radial X-axis provides an easier approach to and from the optical center. Finally, travel in the Y-axis is shortened (12.5 mm) to economize on width, which is made possible because radially oriented manipulators do not require long travel in this axis.
The MP-265/M manipulator is designed specifically for systems requiring 4 or more manipulators. To this end, we have put together systems with specialpricing for 4, 5 and 6 manipulators, and 2 or 3 dual manipulator controllers. We are also unveiling a new linear slide for mounting the MP-265/M mechanical as well as for our other manipulators. With the linear slide gantry (MT-75/LS), the manipulator can be quickly and smoothly moved out to a location where there is easy access to the pipette for replacement.
A single controller capable of running 2 manipulators! Sutter Instrument has taken the simplicity of the MP-225 controller and expanded it to run two manipulators from a single controller/ROE. The MPC-200 works with one or two of our world-renowned mechanicals, the MP-285 (MPC-385) or the MP-225 (MPC-325). The controller is self-detecting so there is no need for manual configuration of the components.
If two manipulators aren’t enough, a second controller can be daisy chained to allow the single ROE-200 to move up to four manipulators. Thus the system can be easily expanded to control highly sophisticated experiments.
MPC-200 Controller
The Sutter MPC-200 is electrically quiet. Unlike the competition, our multi-unit controller employs linear output circuitry. Sutter adds additional manipulators to the same controller without requiring potentially noisy chopper drives.
Faster automated pipette exchange. The MPC-200 has faster “Home” and “Work Position” moves for quicker pipette exchange. Automation is set up and run via the same interface used in the MP-225 controller; however, the speeds of the automated movement are much faster.
Accelerated manual mode. For users who prefer manual pipette exchange we have added “Accelerated Mode” to the ROE. Using Accelerated Mode, the user can make quick manual moves in and out of a setup. Accelerated Mode amplifies the speed attainable in a manual move by smoothly accelerating to the maximum speed during sustained, fast turns of the ROE. Accelerated movement ends as soon as the user stops turning the knob. This mode can be fully disabled for those who feel the need for direct control of the pipette.
To provide the ultimate in flexibility, the MPC-200 can be purchased separately or in one of several basic systems such as the MP-365, MP-385 or the MP-325. Additional component pieces can be added at any time, allowing the user to develop a system tailored to his or her particular needs. Features: MPC-200 and ROE-200 - Single controller and ROE will run two stepper motor drive manipulators
- Self-detecting, daisy-chain capability allows control of four manipulators from one ROE-200
- User-friendly interface: single button access to all major functions
- New Accelerated Mode for fast, manual manipulator movement
- Easy toggle selection of Mode (speed/resolution, pulsed diagonal, Accelerated Mode)
- Display indicates X, Y, Z coordinates, Mode, active manipulator
- Robotic Home and Work Position moves for easy automated pipette exchange
- Faster robotic moves than previous versions
- Definable 4th axis for coaxial pipette movement, angle selected by DIP switches
- Simple USB interface
- Toggle switch selects which manipulator is connected to input device
- LED and display indicate active manipulator
- Low-drift mechanical stability
... Read More | The SOLO is an extremely easy to operate single axis controller capable of running any single axis from Sutter’s line of stepper motor manipulators. The compact design of the SOLO controller requires minimal bench space and provides quiet, fan-free operation.
Features
- Control any single axis from
The SOLO is an extremely easy to operate single axis controller capable of running any single axis from Sutter’s line of stepper motor manipulators. The compact design of the SOLO controller requires minimal bench space and provides quiet, fan-free operation.
Features
- Control any single axis from Sutter stepper motor manipulator collection
- 25 mm or 50 mm length of travel
- Absolute and Relative modes
- User defined Work and Home positions in Absolute mode
- Pulse mode
- USB connectivity
... Read More | The TRIO™-245 from Sutter Instrument is a highly stable 3-axis manipulator with 25 mm of travel on each axis. The TRIO's synthetic 4th axis can be set in software as any angle between 0 and 90 degrees for diagonal movement. Based on a lead-screw design with a smaller overall size and footprintThe TRIO™-245 from Sutter Instrument is a highly stable 3-axis manipulator with 25 mm of travel on each axis. The TRIO's synthetic 4th axis can be set in software as any angle between 0 and 90 degrees for diagonal movement. Based on a lead-screw design with a smaller overall size and footprint than most manipulators, the TRIO-245 is ideal for setups where space is limited.
The TRIO-245 controller employs a combination of state-of-the-art software and mechanical design that eliminates the need for the motor to remain powered on during recording, thus eliminating the heating effects of the motors and giving us the electrically quietest manipulators in the industry. This stability ensures that Sutter manipulators will not drift in the middle of experiments.... Read More |