| Description | Portable Oil-in-water Testing
ERACHECK X, the newest portable oil-in-water tester is easy to use, providing results within 5 minutes. ERACHECK X is fully compliant with the latest IR oil-in-water standard ASTM D8193 measuring TOG, TPH, and FOG in water with sub-ppm precision. Its rugged design, Portable Oil-in-water Testing
ERACHECK X, the newest portable oil-in-water tester is easy to use, providing results within 5 minutes. ERACHECK X is fully compliant with the latest IR oil-in-water standard ASTM D8193 measuring TOG, TPH, and FOG in water with sub-ppm precision. Its rugged design, with a small footprint, makes it suitable for fast on-site compliance testing even under extreme conditions.
Features:
- Full compliance with ASTM D8193
-
Pre-installed factory calibrations for excellent correlation to EPA 1664, ISO 9377 OSPAR, ASTM D7678 & D7066
-
On-site results in under 5 minutes
-
Compact and light-weight instrument design with the smallest footprint
-
8.4” multilingual color touchscreen
-
Built-in industrial PC with USB and Ethernet for LIMS connectivity
-
User-specific calibrations and password protection
... Read More | The cool side of flash point testing
ERAFLASH LT is based on the unrivaled high performance of the other ERAFLASH flash point testers. However, it offers new benefits for fast low temperature flash point testing. Its enhanced cooling system allows decreasing the measurement temperature down to 35 °C The cool side of flash point testing
ERAFLASH LT is based on the unrivaled high performance of the other ERAFLASH flash point testers. However, it offers new benefits for fast low temperature flash point testing. Its enhanced cooling system allows decreasing the measurement temperature down to 35 °C below the ambient temperature without any external cooling. In addition it is the first flash point tester on the market that allows to use ASTM D7094 down to -40 °C (-40 °F) oven temperature with external cooling.
Features: - Maximum safety – no flame, no glowing wires, no fire hazard
- Cost efficient measurement by using just 1 or 2 mL sample
- Low temperature flash point testing between -40 and 120 °C (-40°F – 248°F) oven temperature
- High-speed measurements at low temperatures using a stacked Peltier design
- Compact and easy-to-use stand-alone analyzer with easy LIMS integration
... Read More | The Automated Side of Safe Flash Point Testing
ERAFLASH and the autosampler ERAFLASH S10 with the inherently safe Continuously Closed Cup method guarantee maximum safety and speed. The small volume of 1-2 mL makes both instruments ideal for various applications like fuels, lube oils, paints, The Automated Side of Safe Flash Point Testing
ERAFLASH and the autosampler ERAFLASH S10 with the inherently safe Continuously Closed Cup method guarantee maximum safety and speed. The small volume of 1-2 mL makes both instruments ideal for various applications like fuels, lube oils, paints, flavors & ragrances and many more. They cover an unprecedented temperature range from -25 °C to 420 °C (-13 °F to 788 °F).
Features
- Automated analysis of up to 10 samples within 90 minutes
- PBT - Peltier Boost TechnologyTM for maximum speed & range
- Optional cooling lid
- Contamination Prevention TechnologyTM
- ASTM D7094, D6450, D93c, D56c, IP620, etc.
... Read More | RDE-OES SPECTROMETER FOR ELEMENTAL ANALYSIS
ERAOIL is the first and most advanced stand-alone rotating disc electrode spectrometer analyzing wear metals, additives, and contaminants in all kinds of operating liquids, like lubricating oils, fuels, coolants, process water, etc. Up to 32 elements are RDE-OES SPECTROMETER FOR ELEMENTAL ANALYSIS
ERAOIL is the first and most advanced stand-alone rotating disc electrode spectrometer analyzing wear metals, additives, and contaminants in all kinds of operating liquids, like lubricating oils, fuels, coolants, process water, etc. Up to 32 elements are measured fully automatically within 30 seconds. ERAOIL’s high-end CMOS detector in combination with the automatic background correction allow for a sub-ppm detection limit (LOD) for most elements.
Features at a glance:
- Analyzing wear metals, contaminants, and additives in lubricating oils and hydraulic fluids according to ASTM D6595 and contaminants in gas turbine and engine fuel according to ASTM D6728
- Up to 32 elements in 30 seconds with sub-ppm LOD
- Stand-alone design with built-in PC, touchscreen, sharpener & ventilation
- Smallest and most rugged housing for lab and on-site applications
... Read More | ERAVISC X is the world‘s smallest and most rugged kinematic viscometer with lab-grade precision meeting ASTM D445 and ASTM D7042. Its revolutionary viscosity cell is combined with eralytics unique x-oscillating metal U-tube density meter allowing a simultaneous high-precision density measurement in ERAVISC X is the world‘s smallest and most rugged kinematic viscometer with lab-grade precision meeting ASTM D445 and ASTM D7042. Its revolutionary viscosity cell is combined with eralytics unique x-oscillating metal U-tube density meter allowing a simultaneous high-precision density measurement in full compliance with ASTM D4052 and ISO 12185.
Your Features at a glance
- 2 in 1: Independent measurements of viscosity and density enabling the simultaneous determination of both values at different temperatures.
- High-precision kinematic viscosity testing at any temperature between 15 °C and 100 °C.
- Extremely fast: The fully automated measurement of the kinematic viscosity at 40 °C or at 100 °C takes only 1 minute.
- ERAVISC X has the smallest footprint on the market, still offering maximum ease of use and operator convenience.
- Unique sample introduction from the top and equally easy to operate for right-handed and left-handed persons.
... Read More |