| Description | The Cary 3500 Compact UV-Vis is a double-beam spectrophotometer featuring new and unique measurement capabilities that can be deployed in regulated environments. The system performs ambient and temperature-controlled experiments with air-cooled Peltier temperature control, and it accurately analyzesThe Cary 3500 Compact UV-Vis is a double-beam spectrophotometer featuring new and unique measurement capabilities that can be deployed in regulated environments. The system performs ambient and temperature-controlled experiments with air-cooled Peltier temperature control, and it accurately analyzes low-volume samples—providing in-depth analysis by collecting up to 250 data points per second. The xenon flash lamp—complete with a 10-year replacement warranty (for Cary 3500 instruments purchased from Agilent or participating partners)—eliminates the daily warm-up time and drastically reduces the frequency and cost of lamp replacement.
The Cary 3500 comes complete with Cary UV Workstation software—a next-generation analytical platform with streamlined methods for wavelength reads, scanning, concentration, kinetics, and temperature measurements. When configured with Agilent OpenLab data management software, Cary UV Workstation data is managed, protected, and stored in a local or central secure database.
Features
- Perform accurate and quick temperature-controlled experiments from 0 to 110 °C using a unique and fully integrated air-cooled Peltier system.
- Control the experimental temperature from inside the cuvette using highly accurate, solid-state digital Cary temperature probes with thermal ramp rate up to 40 °C/min.
- Ensure accurate analysis of small-volume measurements with a highly collimated and uniform beam of less than 1.5 mm width, coupled with permanent optical alignment of the stationary cell holders.
- Reduce data processing time and calculation errors with more than 50 built-in and customized calculations that can be saved and applied automatically to any method used routinely.
- Achieve research-grade photometric performance, stability, and range with a double-beam spectrophotometer featuring leading optical technologies.
- Be up and running in minutes by following the intuitive video tutorials in Cary UV Workstation’s Help and Learning Center.
- Meet data integrity standards—provides the technical controls to acquire securely, process, report, and store data in laboratories that must follow the compliance guidelines of FDA 21 CFR Part 11, EU Annex 11, GAMP5, as well as ISO/IEC 17025 and EPA’s 40 CFR Part 160.
- Store and manage your Cary 3500 Compact UV-Vis spectrophotometer data in a local secured storage on the workstation PC, or in a central storage location.
- Deploy the OpenLab software suite and get optional secure database storage for electronic records, complete user administration and access privileges, software licensing, and security settings—e-signature workflow and enhanced audit trail review capabilities.
... Read More | The Cary 4000 is a high-end UV-Vis spectrometer with excellent photometric performance in the 175–900 nm range, making it a powerful reference spectrometer. The system is ideal for analyzing solid samples or biotechnology samples with minimal sample preparation.
Controlled by the Cary WinUV software,The Cary 4000 is a high-end UV-Vis spectrometer with excellent photometric performance in the 175–900 nm range, making it a powerful reference spectrometer. The system is ideal for analyzing solid samples or biotechnology samples with minimal sample preparation.
Controlled by the Cary WinUV software, a Windows-based modular software, it can be ordered with specific modules for bio and pharma.The UV-Vis spectrometer has a number of optional accessories for liquid samples, like temperature control and multicell holders.
Features
- Measure beyond 8.0 absorbance units with reference beam attenuation
- WinUV software—a variety to applications from scanning to kinetics and thermal
- Versatile suite of accessories including temperature control, liquid and solid sample holders, solids autosamplers, multicell holders, and diffuse and specular reflectance accessories
- Variable slit widths (down to 0.01 nm) for optimum control over data resolution
- Large sample compartment with precision LockDown mechanism for quick changes of accessories
- Maximum light throughput using Schwarzchild coupling optics
- Minimal noise and stray light using a floating aluminum casting and double out-of-plane Littrow monochromator
- Extended dynamic range by attenuating the reference beam to be more equivalent to the samples absorbance
- Nitrogen pumping—separate purging in the sample and monochromator compartments
... Read More | The Cary 5000 is a high-performance UV-Vis and NIR spectrophotometer with superb photometric performance in the 175–3300 nm range. Using a PbSmart detector, the Cary 5000 extends its NIR range to 3300 nm making it a powerful tool for materials science research. The Cary WinUV software, a modular The Cary 5000 is a high-performance UV-Vis and NIR spectrophotometer with superb photometric performance in the 175–3300 nm range. Using a PbSmart detector, the Cary 5000 extends its NIR range to 3300 nm making it a powerful tool for materials science research. The Cary WinUV software, a modular Windows-based software, makes it easy to perform powerful analysis and control a number of optional accessories.
The large sample compartment can be expanded to hold large accessories and integrating spheres for spectral and diffuse reflectance. The LockDown mechanism makes it possible to quickly change and position accessories for reproducible results.
Features - Measure beyond 8.0 absorbance units with reference beam attenuation
- Measure 175 to 3300 nm using a PbSmart NIR detector for extended photometric range
- WinUV software—modular software with power analysis and enhanced transfer and report export capabilities
- Versatile set of accessories for materials research including spectral and diffuse reflectance
- Variable slit widths (down to 0.01 nm) for optimum control over data resolution
- Large sample compartment with LockDown mechanism for quick changes and positioning for reproducible results
- Maximum light throughput using Schwarzchild coupling optics for higher accuracy at low transmission levels
- Minimal noise and stray light using a floating aluminum casting and double Littrow monochromator
- Extended dynamic range by attenuating the reference beam to balance double beam signal levels.
- Nitrogen purging—separate purging in the sample and monochromator compartments to reduce oxygen and water vapor in the ultra-violet.
... Read More | The Cary 6000i UV-Vis-NIR spectrophotometer has been tailored for unmatched photometric performance in the short-wave infrared (SWIR) 800–1800 nm range as well as the UV-visible 175 to 800 nm. Using narrow-band InGaAs detection and a 600 lines-per-mm diffaction grating for improved SWIR sensivity, The Cary 6000i UV-Vis-NIR spectrophotometer has been tailored for unmatched photometric performance in the short-wave infrared (SWIR) 800–1800 nm range as well as the UV-visible 175 to 800 nm. Using narrow-band InGaAs detection and a 600 lines-per-mm diffaction grating for improved SWIR sensivity, the Cary 6000i is the ultimate tool for materials characterization spectroscopy.
Using Cary WinUV software with the Cary 6000i makes it easy to perform powerful analysis and control optional accessories. The large sample compartment can be expanded to hold large accessories and integrating spheres for spectral and diffuse reflectance. The LockDown mechanism makes it possible to quickly change and position accessories for reproducible results.
Features
- Measure beyond 8.0 absorbance units with reference beam attenuation
- Measure 175 to 1800 nm using a narrow-band InGaAs detector and 600 l/mm NIR diffraction gratings for unmatched sensivity in the short-wave infrared
- WinUV software—modular software with power analysis and enhanced transfer and report export capabilities
- Versatile set of accessories for materials research including spectral and diffuse reflectance
- Variable slit widths (down to 0.01 nm) for optimum control over data resolution
- Large sample compartment with LockDown mechanism for quick changes and positioning for reproducible results
- Maximum light throughput using Schwarzchild coupling optics for higher accuracy at low transmission levels
- Minimal noise and stray light using a floating aluminum casting and double out-of-plane Littrow monochromator
- Extended dynamic range by attenuating the reference beam to balance double beam signal levels.
- Nitrogen purging—separate purging in the sample and monochromator compartments to reduce oxygen and water vapor in the ultra-violet.
... Read More | The Agilent Cary Eclipse fluorescence spectrophotometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be The Agilent Cary Eclipse fluorescence spectrophotometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput.
The Cary Eclipse is ideal for fluorescent measurements in life sciences and biotechnology, with high sensitivity and inherent bleaching protection for photosensitive samples. Fast data collection enables kinetics measurements, while fiber optics allow for remote sample measurements.
Features - Flexible fluorescence spectrometer with multiple data collection modes including fluorescence, phosphorescence, chemiluminescence, bioluminescence, and time resolved phosphorescence.
- Robust and reliable performance backed up by a 10-year lamp life guarantee (for new Cary Eclipse systems purchased from Agilent or participating partners).
- Low cost-of-ownership due to the guaranteed long lifetime of the Cary Eclipse fluorometer lamp. This also eliminates the need for lamp replacements, a time-consuming and hazardous waste-producing technical operation.
- Easy-to-use Cary WinFLR software suitable for novice and expert users alike. Easily switch between measurement modes without touching the hardware, and quickly get reliable, accurate results.
- Room light immunity provided by a unique design allows the instrument to operate with the front and top panels removed—for easy access to samples and fast installation of large accessories, expanding analytical capabilities.
- Performance and sensitivity that you need right across the fluorescence spectrum due to high-sensitivity optics and detectors.
- High throughput laboratories and fast kinetics applications are well suited to the Cary Eclipse, as its xenon flash lamp allows the instrument to capture a data point every 12.5 ms, and scan at 24,000 nm/min without peak shifts.
- Sampling flexibility enables a wide range of fluorescence applications, with accessories available for every sample type—liquids, solids, and powders. Polarizers and temperature control are also available.
- Inherent protection from photodegradation, as the Cary Eclipse only illuminates the sample when data is actually being acquired. This protects your valuable samples so you can measure them repeatedly and get the same, reliable results.
... Read More |