| X-Ray Generator | Cu, Co, Fe, or Cr, 40 kV, 15 mA | 3 kW sealed X-ray tube | Inquire | 9.0 kW Rotating Anode Generator | Standard sealed tube X-ray source running at 600 W coupled to a special curved monochromator to produce usable X-ray flux comparable to a standard X-ray diffractometer |
| Description | New sixth generation MiniFlex X-ray diffractometer (XRD) is a multipurpose analytical instrument that can determine: phase identification and quantification, percent (%) crystallinity, crystallite size and strain, lattice parameter refinement, Rietveld refinement, and molecular structure. It is New sixth generation MiniFlex X-ray diffractometer (XRD) is a multipurpose analytical instrument that can determine: phase identification and quantification, percent (%) crystallinity, crystallite size and strain, lattice parameter refinement, Rietveld refinement, and molecular structure. It is widely used in research, especially in material science and chemistry, as well as in industry for research and quality control. It is the newest addition to MiniFlex series of benchtop X-ray diffraction analyzers from Rigaku, which began with the introduction of the original MiniFlex system decades ago.
Overview: - New 6th generation design
- Compact, fail-safe radiation enclosure
- Incident beam variable slit
- Simple installation and user training
- Factory aligned goniometer system
- Laptop computer operation
Measurements: - Phase identification
- Phase quantification
- Percent (%) crystallinity
- Crystallite size and strain
- Lattice parameter refinement
- Rietveld refinement
- Molecular structure
Options: - 8-position autosampler
- Graphite monochromator
- D/teX Ultra: silicon strip detector
- HyPix-400 MF: 2D HPAD detector
- Air sensitive sample holder
- Travel case
... Read More | The AutoMATE II can measure large and heavy parts (30 kg with standard manual Z stage; 20 kg with optional automated XYZ stage) with high accuracy.
The X-ray source and detector arm are mounted on a highly accurate two-axis goniometer that can position them relative to the measurement site and The AutoMATE II can measure large and heavy parts (30 kg with standard manual Z stage; 20 kg with optional automated XYZ stage) with high accuracy.
The X-ray source and detector arm are mounted on a highly accurate two-axis goniometer that can position them relative to the measurement site and perform scans with minimum steps of 0.1 microns when using the automated XYZ stage.
Features: - Highly accurate goniometer allows for true micro-area residual stress measurement.
- Automatic mapping measurements with teaching function.
- An X-ray radiation enclosure with interlock system automatically locks the enclosure door when the X-ray shutter is open.
- The measurement position is adjusted by _x000B_a CCD camera equipped with a microscope having a zoom function.
- The two-axis goniometer system allows for both iso-inclination _x000B_and side-inclination methods automatically without readjustment of the sample position.
... Read More | Inquire | The SmartLab high-resolution diffraction system represents the state of the art in fully automated modular XRD systems. The system incorporates a high resolution theta/theta closed loop goniometer drive system, CBO, an in-plane scattering arm, an optional 9.0 kW rotating anode generator, and a fullyThe SmartLab high-resolution diffraction system represents the state of the art in fully automated modular XRD systems. The system incorporates a high resolution theta/theta closed loop goniometer drive system, CBO, an in-plane scattering arm, an optional 9.0 kW rotating anode generator, and a fully automated optical system to make advanced measurements possible for both expert and novice users of the system.
Winner of the 2006 R&D 100 Award for technical innovation, the SmartLab is design for completely automated analysis of thin films and other advanced materials. Powered by Guidance, Rigaku's revolutionary knowledge based software package, SmartLab uses fully deveopled measurement packages for completely automated measurement of thin films, nanomaterials, powders, and liquids. Measurement packages exist for powder diffraction, glancing incidence diffraction, in-plane diffraction, X-ray reflectivity, and small angle X-ray scattering (SAXS) measurements.
Features - Θ/Θ design for horizontal sample mounting
- Closed loop drive system for high resolution scanning
- Optional 9.0 kW rotating anode generator
- Fully automatic system alignment
- Guidance software based automated measurement
- 300 mm wafer handling
- CBO for focusing and parallel beam geometries without reconfiguration
- In-plane diffraction arm for in-plane measurements without reconfiguration
- High resolution optics
- SAXS capabilities
... Read More | Benchtop small molecule structure determination
The Rigaku XtaLAB mini II benchtop X-ray crystallography system, is a compact single crystal X-ray diffractometer designed to produce publication-quality 3D structures. The perfect addition to any synthetic chemistry laboratory, the XtaLAB mini II Benchtop small molecule structure determination
The Rigaku XtaLAB mini II benchtop X-ray crystallography system, is a compact single crystal X-ray diffractometer designed to produce publication-quality 3D structures. The perfect addition to any synthetic chemistry laboratory, the XtaLAB mini II will enhance research productivity by offering affordable structure analysis capability without the necessity of relying on a departmental facility. With the XtaLAB mini II, you no longer have to wait in line to determine your structures. Instead your research group can rapidly analyze new compounds as they are synthesized in the lab.
Teach diffraction through hands-on experience -
In many universities, the departmental X-ray diffractometer is considered off limits to students because of fear that the instrument might be damaged by inexperienced users. The XtaLAB mini II provides the opportunity for students to learn single crystal analysis by actually using a diffractometer. This is not a black box instrument. Rather, the important step of mounting a crystal on the goniometer and physically centering the crystal in the position of the X-ray beam, ensures that students learn the importance of mounting techniques and crystal selection. The simple design of the XtaLAB mini II minimizes the danger of students damaging the system.
Reduced size does not mean reduced data quality -
The Rigaku XtaLAB mini II is a research grade chemical crystallography instrument that sits on the benchtop. No data quality compromises, no extended collection times. Results delivered are unambiguous. X-ray tube lifetime is extended by running at 600 W. To compensate for running at a lower power, a SHINE optic (special curved monochromator) is utilized to produce usable X-ray flux comparable to a standard X-ray system.
Dedicated to producing publication quality structures -
The chief design requirement when creating the XtaLAB mini II was that the structures produced would be publishable in the most demanding scientific journals. The HPC detector is positioned so that the maximum 2θ value is well outside of the Acta Cryst. requirements. The software provides all the tools you need to generate publication quality data that can be used to determine 3D structures from a variety of structure analysis packages.
Features: - Affordable design with low operating costs
- Requires minimal training and support
- Automatic structure solution software
- Provides definitive structural information
- Ideal supplement for a NMR spectrometer
- Perfect self-serve departmental lab instrument
- Ideal teaching instrument
- Publication quality results
- Air-cooled HPC detector
- No special infrastructure required (110 VAC)
- Optional cryosystem available
... Read More |