| Detector(s) | High-speed, high-sensitivity photon-counting detector, HyPix-ED | HyPix-400 2D, D/teX Ultra 250 1D | HyPix-Bantam two-dimensional semiconductor X-ray detector | HyPix-6000HE, the large theta coverage HyPix-Arc 150° or the Dectris EIGER 4M. | HyPix-Bantam |
| Description | The XtaLAB Synergy-ED is the world’s first 3DED/microED (3D Electron Diffraction/micro Electron Diffraction) system and the successful culmination of a joint development project between Rigaku and JEOL. 3DED/microED allows crystallographers to probe the structure of crystals and The XtaLAB Synergy-ED is the world’s first 3DED/microED (3D Electron Diffraction/micro Electron Diffraction) system and the successful culmination of a joint development project between Rigaku and JEOL. 3DED/microED allows crystallographers to probe the structure of crystals and nanocrcrystals as small as tens of nanometers, opening up many new possibilities. This new capability allows you to go beyond the limitations of X-ray diffraction (XRD), which requires samples greater them 1 µm.
- Directly determine 3D molecular structures of submicron crystals for the first time
- Rigaku’s high-speed, high-sensitivity photon counting detector - HyPix-ED
- JEOL’s expertise in generation and control of stable electron beams – 200 kV electron source and optics
- Rigaku’s powerful single crystal analysis software – CrysAlisPro-ED
3DED/microED is an excellent complementary technique to XRD, and the compact design of the XtaLAB Synergy-ED allows it to be easily located in laboratories alongside these instruments. Crystallographers familiar with Rigaku diffractometers running CrysAlisPRO will be able to adapt to the CrysAlisPRO-ED interface very quickly, as it is based on the same intuitive platform.
The fully integrated system incorporates a seamless workflow from data collection to structure determination of three-dimensional molecular structures. AutoChem, which is fully integrated into CrysAlisPRO, performs fast, fully automated structure solution and refinement during data collection, optimizing your productivity.
3DED/microED allows direct structural determination of sub-micron sized crystals that could only previously be postulated by techniques such as NMR. As an emerging technique, there is scope for the generation of many publications using the XtaLAB Synergy-ED.
... Read More | The SmartLab SE is a highly versatile multipurpose X-ray diffractometer with built-in intelligent guidance. It offers continued refinement of the original ease of use features that enabled the original SmartLab to receive the R&D 100 Award in 2006: automatic alignment, component recognition, cross The SmartLab SE is a highly versatile multipurpose X-ray diffractometer with built-in intelligent guidance. It offers continued refinement of the original ease of use features that enabled the original SmartLab to receive the R&D 100 Award in 2006: automatic alignment, component recognition, cross beam optics and advanced photon counting hybrid pixel array detectors (HPAD).
Features: - SmartLab Studio II software based on a new architecturally integrated modular platform
- Cross-beam optics module switches between Bragg-Brentano and parallel beam without the need to change optics.
- HyPix-400 2D detector enables seamless switch between 0D, 1D and 2D detection mode depending on application type.
- D/teX Ultra 250 1D detector accelerates powder diffraction by a factor of 250 in speed and provides adjustable energy resolution of approximately 20% or 4% depending on
sample type. - Integrated intelligent Guidance software enables fully automated measurement including optics and sample alignment.
- Self-aligned optics maximize instrument uptime and minimize cost of ownership.
... Read More | Benchtop small molecule structure determination
The Rigaku XtaLAB mini II benchtop X-ray crystallography system, is a compact single crystal X-ray diffractometer designed to produce publication-quality 3D structures. The perfect addition to any synthetic chemistry laboratory, the XtaLAB mini II Benchtop small molecule structure determination
The Rigaku XtaLAB mini II benchtop X-ray crystallography system, is a compact single crystal X-ray diffractometer designed to produce publication-quality 3D structures. The perfect addition to any synthetic chemistry laboratory, the XtaLAB mini II will enhance research productivity by offering affordable structure analysis capability without the necessity of relying on a departmental facility. With the XtaLAB mini II, you no longer have to wait in line to determine your structures. Instead your research group can rapidly analyze new compounds as they are synthesized in the lab.
Teach diffraction through hands-on experience -
In many universities, the departmental X-ray diffractometer is considered off limits to students because of fear that the instrument might be damaged by inexperienced users. The XtaLAB mini II provides the opportunity for students to learn single crystal analysis by actually using a diffractometer. This is not a black box instrument. Rather, the important step of mounting a crystal on the goniometer and physically centering the crystal in the position of the X-ray beam, ensures that students learn the importance of mounting techniques and crystal selection. The simple design of the XtaLAB mini II minimizes the danger of students damaging the system.
Reduced size does not mean reduced data quality -
The Rigaku XtaLAB mini II is a research grade chemical crystallography instrument that sits on the benchtop. No data quality compromises, no extended collection times. Results delivered are unambiguous. X-ray tube lifetime is extended by running at 600 W. To compensate for running at a lower power, a SHINE optic (special curved monochromator) is utilized to produce usable X-ray flux comparable to a standard X-ray system.
Dedicated to producing publication quality structures -
The chief design requirement when creating the XtaLAB mini II was that the structures produced would be publishable in the most demanding scientific journals. The HPC detector is positioned so that the maximum 2θ value is well outside of the Acta Cryst. requirements. The software provides all the tools you need to generate publication quality data that can be used to determine 3D structures from a variety of structure analysis packages.
Features: - Affordable design with low operating costs
- Requires minimal training and support
- Automatic structure solution software
- Provides definitive structural information
- Ideal supplement for a NMR spectrometer
- Perfect self-serve departmental lab instrument
- Ideal teaching instrument
- Publication quality results
- Air-cooled HPC detector
- No special infrastructure required (110 VAC)
- Optional cryosystem available
... Read More | Customized Single Crystal Diffraction System With Microfocus Rotating Anode Generator
Features: - Ultimate flexibility with customized X-ray system specifically tailored to the needs of your research. Dual ports allow for various combinations of crystallography and SAXS configurations. Your choice
Customized Single Crystal Diffraction System With Microfocus Rotating Anode Generator
Features: - Ultimate flexibility with customized X-ray system specifically tailored to the needs of your research. Dual ports allow for various combinations of crystallography and SAXS configurations. Your choice of VariMax™ confocal double-bounce optics for better spectral purity and beam size to match your sample types.
- Faster, accurate data collection due to high-speed kappa goniometer, high-flux rotating anode X-ray source, fast, low-noise X-ray detector, and highly optimized instrument control software.
- Improve your ability to investigate small samples due to the increased flux from the rotating anode X-ray source as well as the extreme low noise of the HyPix X-ray detectors. Noise-free images mean you can count longer for weakly diffracting crystals without a loss in data quality arising from detector noise.
- Screen crystals in situ with optional XtalCheck crystallization plate screening device.
- Enhance your ability to resolve large unit cells, twins or incommensurate lattices when you select the optional motorized variable beam slit in order to alter divergence to adapt the source to your sample’s requirements.
... Read More | The XtaLAB Synergy-i single crystal X-ray diffractometer includes a high-flux, low maintenance microfocus sealed tube X-ray instrument with a high precision 4-circle kappa goniometer and Rigaku’s own Hybrid Photon Counting (HPC) X-ray detector known as the HyPix-Bantam. The XtaLAB Synergy-i containsThe XtaLAB Synergy-i single crystal X-ray diffractometer includes a high-flux, low maintenance microfocus sealed tube X-ray instrument with a high precision 4-circle kappa goniometer and Rigaku’s own Hybrid Photon Counting (HPC) X-ray detector known as the HyPix-Bantam. The XtaLAB Synergy-i contains the latest technology and can be upgraded from a single source to a dual source instrument. The system can be equipped with Cu and/or Mo sources allowing for a broad range of sample types to be evaluated. The XtaLAB Synergy-i is controlled by the fully-integrated, user-inspired CrysAlisPro software package that is capable of collecting and processing data efficiently and accurately, so you achieve the best data possible.
The XtaLAB Synergy-i is a full-featured single crystal X-ray diffractometer that requires little servicing to maximize uptime and throughput. It is the ideal diffractometer for crystallography research laboratories.
Features: - Up to 50 W microfocus X-ray tube with multilayer optics
- High precision 4-circle kappa goniometer
- State-of-the-art HPC technology detector, the HyPix-Bantam
- New cabinet design with controlled sample and cabinet lighting
- The system conforms to the most stringent of X-ray safety guidelines
- CrysAlisPro: Powerful, user-friendly software, comes standard with AutoChem3.0 for fully-automated structure solution and refinement
- Simple dual-source upgrade
... Read More |