| Description | The SmartLab high-resolution diffraction system represents the state of the art in fully automated modular XRD systems. The system incorporates a high resolution theta/theta closed loop goniometer drive system, CBO, an in-plane scattering arm, an optional 9.0 kW rotating anode generator, and a fullyThe SmartLab high-resolution diffraction system represents the state of the art in fully automated modular XRD systems. The system incorporates a high resolution theta/theta closed loop goniometer drive system, CBO, an in-plane scattering arm, an optional 9.0 kW rotating anode generator, and a fully automated optical system to make advanced measurements possible for both expert and novice users of the system.
Winner of the 2006 R&D 100 Award for technical innovation, the SmartLab is design for completely automated analysis of thin films and other advanced materials. Powered by Guidance, Rigaku's revolutionary knowledge based software package, SmartLab uses fully deveopled measurement packages for completely automated measurement of thin films, nanomaterials, powders, and liquids. Measurement packages exist for powder diffraction, glancing incidence diffraction, in-plane diffraction, X-ray reflectivity, and small angle X-ray scattering (SAXS) measurements.
Features - Θ/Θ design for horizontal sample mounting
- Closed loop drive system for high resolution scanning
- Optional 9.0 kW rotating anode generator
- Fully automatic system alignment
- Guidance software based automated measurement
- 300 mm wafer handling
- CBO for focusing and parallel beam geometries without reconfiguration
- In-plane diffraction arm for in-plane measurements without reconfiguration
- High resolution optics
- SAXS capabilities
... Read More | The AutoMATE II can measure large and heavy parts (30 kg with standard manual Z stage; 20 kg with optional automated XYZ stage) with high accuracy.
The X-ray source and detector arm are mounted on a highly accurate two-axis goniometer that can position them relative to the measurement site and The AutoMATE II can measure large and heavy parts (30 kg with standard manual Z stage; 20 kg with optional automated XYZ stage) with high accuracy.
The X-ray source and detector arm are mounted on a highly accurate two-axis goniometer that can position them relative to the measurement site and perform scans with minimum steps of 0.1 microns when using the automated XYZ stage.
Features: - Highly accurate goniometer allows for true micro-area residual stress measurement.
- Automatic mapping measurements with teaching function.
- An X-ray radiation enclosure with interlock system automatically locks the enclosure door when the X-ray shutter is open.
- The measurement position is adjusted by _x000B_a CCD camera equipped with a microscope having a zoom function.
- The two-axis goniometer system allows for both iso-inclination _x000B_and side-inclination methods automatically without readjustment of the sample position.
... Read More | Breakthrough speed and versatility for polymer structure analysis
- Next-generation WAXS system equipped with a high-brilliance X-ray source
- Structural information captured non-destructively in just a few seconds of exposure
- Time-resolved in-situ measurements for heating, stretching, and
Breakthrough speed and versatility for polymer structure analysis
- Next-generation WAXS system equipped with a high-brilliance X-ray source
- Structural information captured non-destructively in just a few seconds of exposure
- Time-resolved in-situ measurements for heating, stretching, and humidity conditions
DicifferX WAXS Edition redefines what’s possible for in-house WAXS measurements.
By delivering structural insights in seconds, it accelerates decision-making and drives rapid innovation.
Studies once requiring long measurement times or external facilities can now be performed directly in your
own laboratory, streamlining workflows and empowering faster materials development.... Read More | The Miniflex XpC is an X-ray diffractometer designed specifically for quality control in cement plants and other operations requiring online process control such as pharmaceuticals and batteries. It has been optimized for speed and accuracy, bringing lab-quality performance to the manufacturing The Miniflex XpC is an X-ray diffractometer designed specifically for quality control in cement plants and other operations requiring online process control such as pharmaceuticals and batteries. It has been optimized for speed and accuracy, bringing lab-quality performance to the manufacturing floor.
With this in mind, the MiniFlex XpC allows you to process more samples faster, and to gain greater control over your process to ensure consistent quality of your final product. The system is characterized by streamlined operation, rapid analysis with pass/fail evaluation and the ability to automate and integrate with other complementary analytical instruments. The MiniFlex XpC offers the performance level of much larger systems, in the world’s smallest footprint for an online XRD.
Features:
Analytical speed and accuracy are paramount in industrial operations. These factors have been addressed in the design of the MiniFlex XpC by using: - A newly design compact, 800 W high-flux X-ray source and power supply
- World’s largest area/high-throughput 1D detector, enabling higher-intensity data collection
- Optimized θ / θ sample geometry that maintains a horizontal sample orientation
- Streamlined user interface
- Compatibility with sample loading robots or conveyors
- Compact design that can easily be incorporated into existing operations
- A recently patented variable-width scattering slit minimizing background at lower angles
- Sample spinner that negates the effects of preferred orientation
- Uses industry standard steel ring sample holders
Streamlined Operation
In addition to sample loading automation, Rigaku has introduced EasyX, a simplified user interface that allows operators of any skill level to measure and obtain results in as few as three clicks. Built on the same comprehensive platform that underpins Rigaku’s most sophisticated XRDs like the SmartLab, EasyX provides simplified access to the functionalities required for routine QC workflows, including automated pass/fail analysis. A user-friendly graphical user interface accessible via the optional touchscreen allows simple operation of the instrument as well as interpretation of the results.
Compact Design
The MiniFlex XpC has the smallest footprint (0.9 m2) of any instrument in its class. This specification includes the touchscreen user interface.
Online Quality Control
A newly developed sample loader makes the MiniFlex XpC ideal for QC operations. For applications with higher-throughput levels, the system can be integrated with a sample loading robot or a conveyor.... Read More | The XtaLAB Synergy-R is the most powerful small molecule diffractometer available. It includes a high-flux, low-maintenance microfocus rotating anode, the PhotonJet-R, with a high-precision kappa goniometer and Rigaku’s own Hybrid Photon Counting (HPC) X-ray detector the HyPix-6000HE. The PhotonJet-The XtaLAB Synergy-R is the most powerful small molecule diffractometer available. It includes a high-flux, low-maintenance microfocus rotating anode, the PhotonJet-R, with a high-precision kappa goniometer and Rigaku’s own Hybrid Photon Counting (HPC) X-ray detector the HyPix-6000HE. The PhotonJet-R X-ray source is comprised of a Micromax-007 HF rotating anode and a newly designed optic. It is available with either Cu or Mo anodes.
This single crystal X-ray diffractometer has been specially designed to fully integrate the rotating anode X-ray source with all system components and software making it a sleek, simple to use diffractometer without compromising the X-ray intensity.
For labs with high-throughput requirements, increasing the flux reduces data collection time and thus increases the number of samples that can be studied in your laboratory. For extremely small samples, additional flux will extend the minimum size limits for crystals that you can study.
Features: - True shutterless data collection
- Noise-free HPC X-ray detector for better measurement of weak data
- 4-circle kappa goniometer with high accuracy and speed
- Fast workflow due to complete integration of software and hardware
- Excels at the most challenging applications, e.g. MOFs or incommensurate structures
- Extremely high performance due to bright source, noise-free detector and fast goniometer speeds
- Provides unparalleled throughput
- Compact design to fit in your laboratory
... Read More |