| X-Ray Generator | Cu, Co, Fe, or Cr, 40 kV, 15 mA | MicroMax-007 HF microfocus rotating anode source or the highest-flux in-house X-ray source, the FR-X (Mo, Cu, or Cr). | Dual wavelength X-ray source | Inquire | Inquire |
| Description | New sixth generation MiniFlex X-ray diffractometer (XRD) is a multipurpose analytical instrument that can determine: phase identification and quantification, percent (%) crystallinity, crystallite size and strain, lattice parameter refinement, Rietveld refinement, and molecular structure. It is New sixth generation MiniFlex X-ray diffractometer (XRD) is a multipurpose analytical instrument that can determine: phase identification and quantification, percent (%) crystallinity, crystallite size and strain, lattice parameter refinement, Rietveld refinement, and molecular structure. It is widely used in research, especially in material science and chemistry, as well as in industry for research and quality control. It is the newest addition to MiniFlex series of benchtop X-ray diffraction analyzers from Rigaku, which began with the introduction of the original MiniFlex system decades ago.
Overview:
- New 6th generation design
-
Compact, fail-safe radiation enclosure
-
Incident beam variable slit
-
Simple installation and user training
-
Factory aligned goniometer system
-
Laptop computer operation
Measurements:
- Phase identification
-
Phase quantification
-
Percent (%) crystallinity
-
Crystallite size and strain
-
Lattice parameter refinement
-
Rietveld refinement
-
Molecular structure
Options:
- 8-position autosampler
-
Graphite monochromator
-
D/teX Ultra: silicon strip detector
-
HyPix-400 MF: 2D HPAD detector
-
Air sensitive sample holder
-
Travel case
... Read More | Customized Single Crystal Diffraction System With Microfocus Rotating Anode Generator
Features:
- Ultimate flexibility with customized X-ray system specifically tailored to the needs of your research. Dual ports allow for various combinations of crystallography and SAXS configurations. Your choice
Customized Single Crystal Diffraction System With Microfocus Rotating Anode Generator
Features:
- Ultimate flexibility with customized X-ray system specifically tailored to the needs of your research. Dual ports allow for various combinations of crystallography and SAXS configurations. Your choice of VariMax™ confocal double-bounce optics for better spectral purity and beam size to match your sample types.
-
Faster, accurate data collection due to high-speed kappa goniometer, high-flux rotating anode X-ray source, fast, low-noise X-ray detector, and highly optimized instrument control software.
-
Improve your ability to investigate small samples due to the increased flux from the rotating anode X-ray source as well as the extreme low noise of the HyPix X-ray detectors. Noise-free images mean you can count longer for weakly diffracting crystals without a loss in data quality arising from detector noise.
-
Screen crystals in situ with optional XtalCheck crystallization plate screening device.
-
Enhance your ability to resolve large unit cells, twins or incommensurate lattices when you select the optional motorized variable beam slit in order to alter divergence to adapt the source to your sample’s requirements.
... Read More | One source with two high-flux wavelengths is the foundation of the revolutionary XtaLAB Synergy-DW single crystal X-ray diffractometer. It combines the increased flux of a rotating anode X-ray source with the flexibility of two different wavelengths, making it ideal for laboratories exploring a wideOne source with two high-flux wavelengths is the foundation of the revolutionary XtaLAB Synergy-DW single crystal X-ray diffractometer. It combines the increased flux of a rotating anode X-ray source with the flexibility of two different wavelengths, making it ideal for laboratories exploring a wide range of research interests.
The XtaLAB Synergy-DW diffractometer is based on the proven, low-maintenance MicroMax-007 HF microfocus rotating anode. The target is constructed with two different X-ray source materials (Cu and Mo) and is coupled with an auto-switching dual wavelength optic. Copper or molybdenum X-ray radiation is available at the click of a button. The XtaLAB Synergy-DW offers up to 12x higher flux compared to the standard sealed tube X-ray sources and, utilizing only one generator, means overall maintenance is reduced.
Rounding out the XtaLAB Synergy-DW configuration is the fast and efficient four-circle kappa goniometer which is compatible with a wide range of detectors including the HyPix-6000HE and other Hybrid Photon Counting (HPC) X-ray detectors e.g. PILATUS and EIGER detectors.
Features:
- TAccess to two wavelengths in one compact system
-
12x higher flux than sealed tube X-ray sources
-
Low maintenance, high performance system
-
Uses CrysAlisPro software with both PX and SMX modes
-
Multi-functional diffractometer to cover you wherever your research takes you
-
High flux performance means you all your crystallography needs can be carried out ‘in-house’
-
Very little downtime and easy maintenance
-
No need to purchase extra software for different applications
... Read More | The XtaLAB Synergy-ED is the world’s first 3DED/microED (3D Electron Diffraction/micro Electron Diffraction) system and the successful culmination of a joint development project between Rigaku and JEOL. 3DED/microED allows crystallographers to probe the structure of crystals and The XtaLAB Synergy-ED is the world’s first 3DED/microED (3D Electron Diffraction/micro Electron Diffraction) system and the successful culmination of a joint development project between Rigaku and JEOL. 3DED/microED allows crystallographers to probe the structure of crystals and nanocrcrystals as small as tens of nanometers, opening up many new possibilities. This new capability allows you to go beyond the limitations of X-ray diffraction (XRD), which requires samples greater them 1 µm.
- Directly determine 3D molecular structures of submicron crystals for the first time
- Rigaku’s high-speed, high-sensitivity photon counting detector - HyPix-ED
- JEOL’s expertise in generation and control of stable electron beams – 200 kV electron source and optics
- Rigaku’s powerful single crystal analysis software – CrysAlisPro-ED
3DED/microED is an excellent complementary technique to XRD, and the compact design of the XtaLAB Synergy-ED allows it to be easily located in laboratories alongside these instruments. Crystallographers familiar with Rigaku diffractometers running CrysAlisPRO will be able to adapt to the CrysAlisPRO-ED interface very quickly, as it is based on the same intuitive platform.
The fully integrated system incorporates a seamless workflow from data collection to structure determination of three-dimensional molecular structures. AutoChem, which is fully integrated into CrysAlisPRO, performs fast, fully automated structure solution and refinement during data collection, optimizing your productivity.
3DED/microED allows direct structural determination of sub-micron sized crystals that could only previously be postulated by techniques such as NMR. As an emerging technique, there is scope for the generation of many publications using the XtaLAB Synergy-ED.
... Read More | With your success utmost in our minds, we have developed the XtaLAB Synergy-S X-ray diffractometer for single crystal X-ray diffraction. Using a combination of leading edge components and user-inspired software tied together through a highly parallelized architecture, the XtaLAB Synergy-S produces With your success utmost in our minds, we have developed the XtaLAB Synergy-S X-ray diffractometer for single crystal X-ray diffraction. Using a combination of leading edge components and user-inspired software tied together through a highly parallelized architecture, the XtaLAB Synergy-S produces fast, precise data in an intelligent fashion.
The system is based around the PhotonJet-S series of microfocus X-ray sources that incorporate continuously variable divergence slits. These third generation sources have been designed to maximize X-ray photons at the sample by using a combination of new optics, new, longer life, tubes and an improved alignment system. PhotonJets are available in Cu, Mo or Ag wavelengths in either a single or dual source configuration.
The XtaLAB Synergy-S single crystal X-ray diffractometer comes with kappa goniometer that incorporates fast motor speeds and a unique telescopic two-theta arm to provide total flexibility for your diffraction experiment. The system is also equipped with your choice of HPC X-ray detector, including the HyPix-6000HE, PILATUS3 R 200K, PILATUS3 R 300K or EIGER 1M.
Features:
- Thigh source flux and increased goniometer speed to allow quicker, more agile experiments
-
Unique telescopic two-theta arm to reach both longer and shorter crystal-to-detector distances
-
Enhanced kappa goniometer design with symmetrical 2? positioning
-
Improved X-ray optic alignment mechanism for easy maintenance
-
User-inspired cabinet design for improved workflow
-
New electronically controlled brightness of cabinet and crystal lighting
-
Extremely high performance due to bright source, noise-free X-ray detector and fast goniometer speeds
-
Continuously variable divergence slits lets you resolve reflections from long unit cells
-
Minimal downtime with longer X-ray tube lifetime - supported by online diagnostics and troubleshooting
-
Compact design to fit in your laboratory
... Read More |