Purified water is one of the most important resources you’ll find in the lab. Reagent grade water systems allow labs to take tap water, or in some cases pretreated water, and convert it into a purified form, suitable for making reagents. Purified water is classified by its resistivity, conductivity, and total organic content, breaking it down into type I, II, and III water systems. Type II water is suitable for use in most reagents. Some factors to consider in purchasing a reagent grade water system include the instrument’s footprint, its monitoring capabilities, maximum output, and feed source.
| | | | | |
Company | Aqua Solutions, Inc. | Aqua Solutions, Inc. | Aqua Solutions, Inc. | Aqua Solutions, Inc. | Aqua Solutions, Inc. |
Item | Type II Reagent Grade Standard Flow Systems - Single Tank | Combination Reverse Osmosis plus Type II DI Systems | Type II DI for Hydrogen Generator Water Systems | Type II High Flow Systems - Dual Tank | Type II Reagent Grade Standard Flow Systems - Dual Tank |
Citations | | | | | |
Catalog Number | 2618S1 / 2618S1-RO / 2635S1 / 2635S1-1/2 / 2635S1-RO / 2635S1-RO-1/2 | RODI-T2 / RODI-T2-H | H-01-C / H-40-C / H-40-C-H | 2618S2-DW / 2618S2-DW-RO / 2618S2-DW11 / 2618S2-DW11-RO / 2635S2-DW / 2635S2-DW-RO / 2635S2-DW11 / Model 2635S2-DW11-RO | 2618S2 / 2618S2-RO / 2635S2 / 2635S2-1/2 / 2635S2-RO / 2635S2-RO-1/2 |
Price | | | | | |
Description | AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
Type II Reagent Grade systems are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications. Low Flow systems should be considered for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Features
- The system includes one installed plus one spare DI Module.
- Made in the USA.
- The sensor displays a Green LED when water quality is >2-megohm-cm and a Red LED flashes when it’s time to change DI Modules.
- One (1) year warranty.
- You purchase and own the system hardware at a reasonable cost.
- The system is so easy to install, you can do it yourself.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More | AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water.
All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water.
All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
Type II Reagent Grade systems are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications. Low Flow systems should be considered for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Features
- The System price includes two purification modules: one installed and one spare.
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system.
- Made in the USA.
- Includes LCD readout conductivity monitor with adjustable setpoint and flashing red LED alarm.
- One (1) year warranty.
- Certified by CSA for the US & Canada, CE marked for export to EU countries.
- Built-in Reverse Osmosis pretreatment lowers operating cost by economically removing 95-98% of the contaminants from the tap water.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More | AQUA SOLUTIONS' Type II DI for Hydrogen Generator Water Systems are custom-designed to support Proton Energy Systems' HOGEN® GC, HOGEN® 20, and HOGEN® 40 hydrogen generators on a world-wide basis. We designed them this way in order to make sure that they will work, no matter where-in-AQUA SOLUTIONS' Type II DI for Hydrogen Generator Water Systems are custom-designed to support Proton Energy Systems' HOGEN® GC, HOGEN® 20, and HOGEN® 40 hydrogen generators on a world-wide basis. We designed them this way in order to make sure that they will work, no matter where-in-the-world you install them!
Features quick-disconnect snap-in module and produces virgin (not regenerated) ion exchange resin.
Features
- The system price includes one installed plus one spare Purification Kit.
- Made in the USA.
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system.
- Includes LCD readout conductivity monitor with adjustable setpoint and flashing red LED alarm.
- One (1) year warranty.
Additional Features for Model H-40-C and Model H-40-C-H
- Built-in Reverse Osmosis pretreatment lowers operating cost by economically removing 95-98% of the contaminants from the tap water.
- You purchase and own the system hardware at a reasonable cost.
- The system is so easy to install, you can do it yourself.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More | AQUA SOLUTIONS' Type II DI High Flow Systems are available with a 42-liter pressurized storage tank with a flow rate of up to 15-Liters/minute or a 130-Liter pressurized storage tank with a flow rate of up to 40-Liters/minute. All AQUA SOLUTIONS' Type II laboratory water purification Systems produceAQUA SOLUTIONS' Type II DI High Flow Systems are available with a 42-liter pressurized storage tank with a flow rate of up to 15-Liters/minute or a 130-Liter pressurized storage tank with a flow rate of up to 40-Liters/minute. All AQUA SOLUTIONS' Type II laboratory water purification Systems produce purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
High Flow Systems are reccommended for Glassware Washers, and other high flow (7-40 liters/min) applications. Type II Reagent Grade systems are also available as low-flow, low-capacity systems for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Features
- The system includes one installed plus one spare DI module.
- Made in the USA.
- The sensor displays a Green LED when water quality is >2-megohm-cm and a Red LED flashes when it’s time to change DI Modules.
- One (1) year warranty.
- You purchase and own the system hardware at a reasonable cost.
- The system is so easy to install, you can do it yourself.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More | AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produces purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
Type II Reagent Grade systems are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications. Low Flow systems should be considered for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Features
- The System price includes two purification modules: one installed and one spare.
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system.
- Made in the USA.
- Includes LCD readout conductivity monitor with adjustable setpoint and flashing red LED alarm.
- One (1) year warranty.
- Built-in Reverse Osmosis pretreatment lowers operating cost by economically removing 95-98% of the contaminants from the tap water.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More |
Method | Deionization | Deionization and Reverse Osmosis | Deionization and Reverse Osmosis | Deionization | Deionization |
Output | 3 to 12 L/min (depending on model) | 4 L/min | 0.35 or 2 L/min | 20 or 40 L/min | 3 to 12 L/min (depending on model) |
Resistivity | > 2 MΩ-cm | 2 to 15 MΩ-cm | 2 to 15 MΩ-cm | > 2 MΩ-cm | > 2 MΩ-cm |
Dimensions | Inquire | Inquire | Inquire | Inquire | Inquire |
Feed Source | Tap or RO | Tap Water | Tap or RO | Tap or RO | Tap or RO |
Get Quote | | | | | |