| Catalog Number | 2618S2-DW / 2618S2-DW-RO / 2618S2-DW11 / 2618S2-DW11-RO / 2635S2-DW / 2635S2-DW-RO / 2635S2-DW11 / Model 2635S2-DW11-RO | Model 2035A / Model 2035AU / Model 2036A / Model 2036AU | Model 2035B / Model 2035BU / Model 2036B / Model 2036BU | Model 2035AL / Model 2036AL | Model 2035BL / Model 2036BL |
| Description | AQUA SOLUTIONS' Type II DI High Flow Systems are available with a 42-liter pressurized storage tank with a flow rate of up to 15-Liters/minute or a 130-Liter pressurized storage tank with a flow rate of up to 40-Liters/minute. All AQUA SOLUTIONS' Type II laboratory water purification Systems produceAQUA SOLUTIONS' Type II DI High Flow Systems are available with a 42-liter pressurized storage tank with a flow rate of up to 15-Liters/minute or a 130-Liter pressurized storage tank with a flow rate of up to 40-Liters/minute. All AQUA SOLUTIONS' Type II laboratory water purification Systems produce purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
High Flow Systems are reccommended for Glassware Washers, and other high flow (7-40 liters/min) applications. Type II Reagent Grade systems are also available as low-flow, low-capacity systems for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Features
- The system includes one installed plus one spare DI module.
- Made in the USA.
- The sensor displays a Green LED when water quality is >2-megohm-cm and a Red LED flashes when it’s time to change DI Modules.
- One (1) year warranty.
- You purchase and own the system hardware at a reasonable cost.
- The system is so easy to install, you can do it yourself.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
... Read More | AQUA SOLUTIONS' High Flow Analytical Grade Type I DI Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Analytical Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and AQUA SOLUTIONS' High Flow Analytical Grade Type I DI Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Analytical Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water.
Features
- Made in the USA
- 6000 or 12,000 Grains as CaCO3 to a 0.02-Megohm end point
- UV Sterilizer prevents the growth of microorganisms within the system (Model 2036AU)
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system
- Ultrapure water is available on demand up to 7 ft. or 20 ft. from the system via the included dispensing valve or via the included remote dispenser.
- Final Filtration is 0.22 micron (absolute) capsule
- Two (2) year system warranty (US & Canada only)
... Read More | AQUA SOLUTIONS' High Flow Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Biological Grade Type I DI Systems produce purified water that AQUA SOLUTIONS' High Flow Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Biological Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water. Biological Grade systems include a built-in ultrafilter to reduce pyrogen, endotoxin, RNase and DNase levels.
Features
- Made in the USA
- Ultrafilter - Removes Pyrogen, Endotoxin, RNase, & DNase
- UV Sterilizer prevents the growth of microorganisms within the system (Model 2035BU / Model 2036BU)
- 6000 or 12,000 Grains as CaCO3 to a 0.02-Megohm end point
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system
- Ultrapure water is available on demand up to 7 ft. from the system via the included remote dispenser.
- Final Filtration is 0.22 micron (absolute) capsule
- Two (2) year system warranty (US & Canada only)
... Read More | AQUA SOLUTIONS' High Flow Ultra-Low TOC Analytical Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Ultra-Low TOC Analytical Grade Type I DI Systems AQUA SOLUTIONS' High Flow Ultra-Low TOC Analytical Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' Ultra-Low TOC Analytical Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water. Ultra-Low TOC Grade systems include a combination built-in ultraviolet (UV) oxidizer/sterilizer to reduce TOC the lowest possible levels.
Features
- Made in the USA
- Dual wavelength - Reduces TOC levels to <5 ppb="" and="" prevents="" the="" growth="" of="" microorganisms="" within="" the="" system="">
- 6000 or 12,000 Grains as CaCO3 to a 0.02-Megohm end point
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system
- Ultrapure water is available on demand up to 7 ft. from the system via the included remote dispenser.
- Final Filtration is 0.22 micron (absolute) capsule
- Two (2) year system warranty (US & Canada only)
... Read More | AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI laboratory water purification Systems are available in Standard and High Flow/Capacity versions, for operation on either Ordinary Tap Water or Pretreated Water. All AQUA SOLUTIONS' High Flow Ultra-Low TOC Biological Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water. Ultra-Low TOC Biological Grade Type I DI Systems include a built-in dual-wavelength ultraviolet (UV) oxidizer/sterilizer to reduce TOC the lowest possible levels, and a built-in ultrafilter (UF) to reduce pyrogen, endotoxin, RNase and DNase. This combination of UV-UF also results in water that has no RNase or DNase activity.
Features
- Made in the USA
- Ultrafilter - Removes Pyrogen, Endotoxin, RNase, & DNase
- Dual wavelength - Reduces TOC levels to <5 ppb="" and="" prevents="" the="" growth="" of="" microorganisms="" within="" the="" system="">
- 6,000 Grains as CaCO3 to a 0.02-Megohm end point
- Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system
- Ultrapure water is available on demand up to 7 ft. from the system via the included remote dispenser.
- Final Filtration is 0.22 micron (absolute) capsule
- Two (2) year system warranty (US & Canada only)
... Read More |