| Description | This Isolation Glove Box is designed to place an added barrier between you and any suspected contaminants contained within an envelope or package. This containment glove box's hermetically sealed interior and neoprene gloves provide the air tight atmosphere you desire when opening tainted mail, and This Isolation Glove Box is designed to place an added barrier between you and any suspected contaminants contained within an envelope or package. This containment glove box's hermetically sealed interior and neoprene gloves provide the air tight atmosphere you desire when opening tainted mail, and the neoprene gloves provide the greatest dexterity available while keeping your skin safe from contamination.
The 18" x 18" side door of the glove box allows for larger packages to be passed into the glove box before being opened. Finally the patented COY Diaphragm Top allows the user to comfortably enter the chamber through the glove ports without fighting the gloves, and without expelling the interior atmosphere to the room air through a bubblier or pressure relief valve. The COY Isolation Glove Box for anthrax containment is the peace of mind you and your employees have been looking for.... Read More | FLEXIBLE VINYL CHAMBERS These Flexible Glove Boxes are a simple low cost alternative to rigid glove boxes for sealed enviroments that can be purged with any inert gas through the standard Ball Valve and Pressure Relief Valve.
PVC CONSTRUCTION The glove boxes are constructed of heavy duty, flexible FLEXIBLE VINYL CHAMBERS These Flexible Glove Boxes are a simple low cost alternative to rigid glove boxes for sealed enviroments that can be purged with any inert gas through the standard Ball Valve and Pressure Relief Valve.
PVC CONSTRUCTION The glove boxes are constructed of heavy duty, flexible PVC mounted on a rigid base. Thickness ranges from 20 to 40 mils.
RELIABLE AND DURABLE All seams are radio frequency welded to produce a one piece bag that will withstand many years of service.
MANY APPLICATIONS In addition to medical laboratory applications, Coy controlled environment glove boxes have found other applications in industry due to their design and economy. These include micro welding, handling of hazardous materials, dry atmosphere, optical and electronic equipment assembly.
REDUCES OPERATOR FATIGUE The optically clear vinyl greatly increases operator vision, and the gloves do not fight back when entered, as in rigid glove boxes. In addition, there are no rigid ports to interfere with and consequently tire the operator's arms.
MODULAR DESIGN Coy glove boxes are designed to be expandable and easily modified through the many options available.
CUSTOM SIZES AND CONFIGURATIONS Special size glove boxes are available at minimal additional cost, and accessories are available to economically create special configurations.
GLOVE BOX DETAILS - The glove box front is made of 20 mil pressed polished clear vinyl with 40 mil vinyl bottom extending 2" (51 mm) up on all sides. It is mounted on a 3/4" (19 mm) plywood base covered with a 1/4" (6 mm) foam pad and heavy vinyl. A 1" (25 mm) aluminum tubular frame supports the glove box. All glove boxes come with a large equipment entry installed opposite the entry lock. This entrance consists of a 20" (50 cm) entry cap that is taped in place after installing large equipment in the glove box.
- Glove ports, 10" x 13" oval opening (25 x 33 cm) on 19" (48 cm) centers, are constructed of a special highly flexible vinyl frosted to prevent cracking and gas leakage at bend points.
- Two 1 1/2" (38 mm) I.D. nipples are attached for electrical wiring input. (Additional nipples may be ordered at the time of purchase.)
- Also included as standard with all glove boxes, is a six receptacle electric outlet.
- Large gloves are supplied with the glove box (replacements or other sizes are available from Coy Laboratory Products).
- The latex gloves are placed over a special cuff and then placed in the permanently attached sleeves and taped in place. This system provides a means of replacing damaged gloves without affecting the atmosphere of the glove box. Additional glove ports can be ordered mounted in most positions if requested at the time of purchase.
... Read More | Coy Dry Glove Boxes control and maintain humidity levels below ambient conditions, achieving a humidity level of 5% or lower through either a desiccant system for removing moisture or through a dry gas purge system, typically utilizing dry nitrogen or argon. Control is through a revolutionary Coy Dry Glove Boxes control and maintain humidity levels below ambient conditions, achieving a humidity level of 5% or lower through either a desiccant system for removing moisture or through a dry gas purge system, typically utilizing dry nitrogen or argon. Control is through a revolutionary sensor and monitor/controller providing precise control in .1% increments, with tuning features.
STYLES Two standard styles are available: a clear Polycarbonate unit that features a lower cost to purchase, and relatively low cost to customize. The Aluminum units while more expensive on initial purchase are a longer lasting, sturdy build that with the addition of tempered Glass can be used in highly corrosive chemical use. Polycarbonate units have 4 standard sizes and Aluminum units have two.
AUTOMATIC CONTROL The automatic controller provides monitoring and control of the relative humidity. It activates the necessary system (dehumidification for humidification) when the moisture level deviates from the adjustable set point. Flow rates, sensor position circulation, and orifice positions were all considered in the design to maximize control capabilities and humidity uniformity across the glove box. Since this is a closed loop circulation system, an inert gas environment can be maintained in the glove box while controlling the humidity.
DRYING SYSTEMS Two systems are available to dry these Humidity Control Glove Boxes a Desiccant Drying System and a Dry Gas Purge System. The Desiccant System is standard however the Dry Gas Purge System can be substituted at no extra cost. The Dry Gas Purge System allows for a lower attainable humidity level 3% (1% using special dry gas) vs 5% for the desiccant System. The Gas Purge System is also cleaner, provides faster drying times and requires less maintenance (Desiccant needs to be rejuvenated). The Desiccant Drying system can be a lot less expensive to operate. The two systems can also be used to work together to minimize the cost of the dry gas purge system.
GLOVELESS SLEEVE All units are equipped with gloveless sleeves to allow superior handling of interior samples. However, the moisture from skin does influence Humidity levels below 15% Rh and for these applications the user may need to operate with gloves which can easily placed over COY over the gloveless sleeve cuff.
TRANSFER CHAMBER OPTION All units have an optional pass thru chamber (air lock) available. This enables transfer of equipment and samples without drastic changes to the interior environment.... Read More | Coy Dry Glove Boxes control and maintain humidity levels below ambient conditions, achieving a humidity level of 5% or lower through either a desiccant system for removing moisture or through a dry gas purge system, typically utilizing dry nitrogen or argon. Control is through a revolutionary Coy Dry Glove Boxes control and maintain humidity levels below ambient conditions, achieving a humidity level of 5% or lower through either a desiccant system for removing moisture or through a dry gas purge system, typically utilizing dry nitrogen or argon. Control is through a revolutionary sensor and monitor/controller providing precise control in .1% increments, with tuning features.
STYLES Two standard styles are available: a clear Polycarbonate unit that features a lower cost to purchase, and relatively low cost to customize. The Aluminum units while more expensive on initial purchase are a longer lasting, sturdy build that with the addition of tempered Glass can be used in highly corrosive chemical use. Polycarbonate units have 4 standard sizes and Aluminum units have two.
AUTOMATIC CONTROL The automatic controller provides monitoring and control of the relative humidity. It activates the necessary system (dehumidification for humidification) when the moisture level deviates from the adjustable set point. Flow rates, sensor position circulation, and orifice positions were all considered in the design to maximize control capabilities and humidity uniformity across the glove box. Since this is a closed loop circulation system, an inert gas environment can be maintained in the glove box while controlling the humidity.
DRYING SYSTEMS Two systems are available to dry these Humidity Control Glove Boxes a Desiccant Drying System and a Dry Gas Purge System. The Desiccant System is standard however the Dry Gas Purge System can be substituted at no extra cost. The Dry Gas Purge System allows for a lower attainable humidity level 3% (1% using special dry gas) vs 5% for the desiccant System. The Gas Purge System is also cleaner, provides faster drying times and requires less maintenance (Desiccant needs to be rejuvenated). The Desiccant Drying system can be a lot less expensive to operate. The two systems can also be used to work together to minimize the cost of the dry gas purge system.
GLOVELESS SLEEVE All units are equipped with gloveless sleeves to allow superior handling of interior samples. However, the moisture from skin does influence Humidity levels below 15% Rh and for these applications the user may need to operate with gloves which can easily placed over COY over the gloveless sleeve cuff.
TRANSFER CHAMBER OPTION All units have an optional pass thru chamber (air lock) available. This enables transfer of equipment and samples without drastic changes to the interior environment.... Read More | O2 Animal Study Glove Boxes allow access to cages and the ability to change food and water quickly and easily while maintaining desired O2 levels. Options include airlocks custom-sized to your cages, humidity control, and gaseous waste removal.
Standard Features and Equipment O2 Animal Study Glove Boxes allow access to cages and the ability to change food and water quickly and easily while maintaining desired O2 levels. Options include airlocks custom-sized to your cages, humidity control, and gaseous waste removal.
Standard Features and Equipment - Oxygen is controlled with user-adjustable setpoints in increments of 0.1% (option available for ramp and cycle)
- Glove box materials range from flexible vinyl to durable aluminum and
- Purge-only airlock (which, for optimum efficiency, should be custom made based on the number and size of the animals as well as their cage size)
- Interior power supply
- Fan (heated or unheated)
Available in Vinyl, Aluminum and Polycarbonate.... Read More |