A flash point tester is an instrument that determines the flash point of a sample, which is the temperature point at which the sample vaporizes to another composition state in the air that can be ignited. At that moment, the flash point apparatus can determine and measure the vapor pressure change in which this occurs, also known as the lowest limit of flammability. Therefore, vapor concentration can be determined by temperature. There are two main types of flash point analyzers: open cup flash point testers and closed cup flashpoint testers. The open type is intended to simulate an open and natural environment, whereas a closed type is more commonly used in laboratory testing.
Applications for flash point testing
Determination of flash point is useful for a variety of applications, such as determining the flash point of diesel and other fuel types in petrochemical analysis, flavors in food testing, paints in materials testing, and waste removal for environmental analysis.
Key considerations for purchasing a flash point tester
When looking to purchase a flash point tester keep a look out for the type, measuring temperature range for sample analysis, and standard method accreditations. Other helpful variables to keep in mind include the minimum sample volume, analysis time, and the capability for autosampling, which allows for more than just one analysis to take place at a time.
|  |  |  |
| Company | eralytics GmbH | eralytics GmbH | eralytics GmbH |
| Item | ERAFLASH S10 Flash Point Tester | ERAFLASH Flash Point Tester | ERAFLASH LT Flash Point Tester |
| Reviews | | | |
| Catalog Number | EFS01 | EF10 | EF02 |
| Price | | | |
| Description | The Automated Side of Safe Flash Point Testing
ERAFLASH and the autosampler ERAFLASH S10 with the inherently safe Continuously Closed Cup method guarantee maximum safety and speed. The small volume of 1-2 mL makes both instruments ideal for various applications like fuels, lube oils, paints, The Automated Side of Safe Flash Point Testing
ERAFLASH and the autosampler ERAFLASH S10 with the inherently safe Continuously Closed Cup method guarantee maximum safety and speed. The small volume of 1-2 mL makes both instruments ideal for various applications like fuels, lube oils, paints, flavors & ragrances and many more. They cover an unprecedented temperature range from -25 °C to 420 °C (-13 °F to 788 °F).
Features
- Automated analysis of up to 10 samples within 90 minutes
- PBT - Peltier Boost TechnologyTM for maximum speed & range
- Optional cooling lid
- Contamination Prevention TechnologyTM
- ASTM D7094, D6450, D93c, D56c, IP620, etc.
... Read More | The Safe Side of Flash Point Testing
ERAFLASH with the inherently safe Continuously Closed Cup method guarantees maximum safety and speed. The small volume of 1-2 mL makes ERAFLASH ideal for various applications like fuels, lube oils, paints, flavors & fragrances and many more. ERAFLASH covers The Safe Side of Flash Point Testing
ERAFLASH with the inherently safe Continuously Closed Cup method guarantees maximum safety and speed. The small volume of 1-2 mL makes ERAFLASH ideal for various applications like fuels, lube oils, paints, flavors & fragrances and many more. ERAFLASH covers an unprecedented temperature range from -25 °C to 420 °C (-13 °F to 788 °F).
- No open ignition source
- Only 1-2 mL sample needed
- PBT - Peltier Boost TechnologyTM for maximum speed & range
- Built-in Quality Control Mode
- Heat-insulated cup holder
- ASTM D7094, D6450, D93c, D56c, IP620, etc.
... Read More | The cool side of flash point testing
ERAFLASH LT is based on the unrivaled high performance of the other ERAFLASH flash point testers. However, it offers new benefits for fast low temperature flash point testing. Its enhanced cooling system allows decreasing the measurement temperature down to 35 °C The cool side of flash point testing
ERAFLASH LT is based on the unrivaled high performance of the other ERAFLASH flash point testers. However, it offers new benefits for fast low temperature flash point testing. Its enhanced cooling system allows decreasing the measurement temperature down to 35 °C below the ambient temperature without any external cooling. In addition it is the first flash point tester on the market that allows to use ASTM D7094 down to -40 °C (-40 °F) oven temperature with external cooling.
Features: - Maximum safety – no flame, no glowing wires, no fire hazard
- Cost efficient measurement by using just 1 or 2 mL sample
- Low temperature flash point testing between -40 and 120 °C (-40°F – 248°F) oven temperature
- High-speed measurements at low temperatures using a stacked Peltier design
- Compact and easy-to-use stand-alone analyzer with easy LIMS integration
... Read More |
| Type | (Modified) Continuously Closed Cup | (Modified) Continuously Closed Cup | (Modified) Continuously Closed Cup |
| Test Standards | ASTM D6450, ASTM D7094 Pre-Programmed Correlation Methods to: Pensky Martens Closed Cup: ASTM D93, EN ISO 2719, DIN 51758, IP 34, JIS K2265, TAG Closed Cup: ASTM D56, Abel Pensky Closed Cup: ISO 13736, IP 170, Small Scale Closed Cup and Flash / No Flash methods: EN ISO 3679, EN ISO 3680, ASTM D3828, IP620 | ASTM D6450, ASTM D7094 Pre-Programmed Correlation Methods to: Pensky Martens Closed Cup: ASTM D93, EN ISO 2719, DIN 51758, IP 34, JIS K2265, TAG Closed Cup: ASTM D56, Abel Pensky Closed Cup: ISO 13736, IP 170, Small Scale Closed Cup and Flash / No Flash methods: EN ISO 3679, EN ISO 3680, ASTM D3828, IP620 | ASTM D6450, ASTM D7094
correlation to: ASTM D56, D93, D3828, EN 2719, EN 3679, EN 3680 |
| Measuring Temperature Range | -25°C to 420°C | -25°C to 420°C | -40°C to 120°C |
| Voltage | 85 to 264 V | 85 to 264 V | 85 to 264 V |
| Get Quote | | | |