Description | The SmartLab high-resolution diffraction system represents the state of the art in fully automated modular XRD systems. The system incorporates a high resolution theta/theta closed loop goniometer drive system, CBO, an in-plane scattering arm, an optional 9.0 kW rotating anode generator, and a fullyThe SmartLab high-resolution diffraction system represents the state of the art in fully automated modular XRD systems. The system incorporates a high resolution theta/theta closed loop goniometer drive system, CBO, an in-plane scattering arm, an optional 9.0 kW rotating anode generator, and a fully automated optical system to make advanced measurements possible for both expert and novice users of the system.
Winner of the 2006 R&D 100 Award for technical innovation, the SmartLab is design for completely automated analysis of thin films and other advanced materials. Powered by Guidance, Rigaku's revolutionary knowledge based software package, SmartLab uses fully deveopled measurement packages for completely automated measurement of thin films, nanomaterials, powders, and liquids. Measurement packages exist for powder diffraction, glancing incidence diffraction, in-plane diffraction, X-ray reflectivity, and small angle X-ray scattering (SAXS) measurements.
Features
- Θ/Θ design for horizontal sample mounting
- Closed loop drive system for high resolution scanning
- Optional 9.0 kW rotating anode generator
- Fully automatic system alignment
- Guidance software based automated measurement
- 300 mm wafer handling
- CBO for focusing and parallel beam geometries without reconfiguration
- In-plane diffraction arm for in-plane measurements without reconfiguration
- High resolution optics
- SAXS capabilities
... Read More | The Miniflex XpC is an X-ray diffractometer designed specifically for quality control in cement plants and other operations requiring online process control such as pharmaceuticals and batteries. It has been optimized for speed and accuracy, bringing lab-quality performance to the manufacturing The Miniflex XpC is an X-ray diffractometer designed specifically for quality control in cement plants and other operations requiring online process control such as pharmaceuticals and batteries. It has been optimized for speed and accuracy, bringing lab-quality performance to the manufacturing floor.
With this in mind, the MiniFlex XpC allows you to process more samples faster, and to gain greater control over your process to ensure consistent quality of your final product. The system is characterized by streamlined operation, rapid analysis with pass/fail evaluation and the ability to automate and integrate with other complementary analytical instruments. The MiniFlex XpC offers the performance level of much larger systems, in the world’s smallest footprint for an online XRD.
Features:
Analytical speed and accuracy are paramount in industrial operations. These factors have been addressed in the design of the MiniFlex XpC by using:
- A newly design compact, 800 W high-flux X-ray source and power supply
- World’s largest area/high-throughput 1D detector, enabling higher-intensity data collection
- Optimized θ / θ sample geometry that maintains a horizontal sample orientation
- Streamlined user interface
- Compatibility with sample loading robots or conveyors
- Compact design that can easily be incorporated into existing operations
- A recently patented variable-width scattering slit minimizing background at lower angles
- Sample spinner that negates the effects of preferred orientation
- Uses industry standard steel ring sample holders
Streamlined Operation
In addition to sample loading automation, Rigaku has introduced EasyX, a simplified user interface that allows operators of any skill level to measure and obtain results in as few as three clicks. Built on the same comprehensive platform that underpins Rigaku’s most sophisticated XRDs like the SmartLab, EasyX provides simplified access to the functionalities required for routine QC workflows, including automated pass/fail analysis. A user-friendly graphical user interface accessible via the optional touchscreen allows simple operation of the instrument as well as interpretation of the results.
Compact Design
The MiniFlex XpC has the smallest footprint (0.9 m2) of any instrument in its class. This specification includes the touchscreen user interface.
Online Quality Control
A newly developed sample loader makes the MiniFlex XpC ideal for QC operations. For applications with higher-throughput levels, the system can be integrated with a sample loading robot or a conveyor.... Read More | The SmartLab SE is a highly versatile multipurpose X-ray diffractometer with built-in intelligent guidance. It offers continued refinement of the original ease of use features that enabled the original SmartLab to receive the R&D 100 Award in 2006: automatic alignment, component recognition, cross The SmartLab SE is a highly versatile multipurpose X-ray diffractometer with built-in intelligent guidance. It offers continued refinement of the original ease of use features that enabled the original SmartLab to receive the R&D 100 Award in 2006: automatic alignment, component recognition, cross beam optics and advanced photon counting hybrid pixel array detectors (HPAD).
Features:
- SmartLab Studio II software based on a new architecturally integrated modular platform
- Cross-beam optics module switches between Bragg-Brentano and parallel beam without the need to change optics.
- HyPix-400 2D detector enables seamless switch between 0D, 1D and 2D detection mode depending on application type.
- D/teX Ultra 250 1D detector accelerates powder diffraction by a factor of 250 in speed and provides adjustable energy resolution of approximately 20% or 4% depending on
sample type.
- Integrated intelligent Guidance software enables fully automated measurement including optics and sample alignment.
- Self-aligned optics maximize instrument uptime and minimize cost of ownership.
... Read More | Customized Single Crystal Diffraction System With Microfocus Rotating Anode Generator
Features:
- Ultimate flexibility with customized X-ray system specifically tailored to the needs of your research. Dual ports allow for various combinations of crystallography and SAXS configurations. Your choice
Customized Single Crystal Diffraction System With Microfocus Rotating Anode Generator
Features:
- Ultimate flexibility with customized X-ray system specifically tailored to the needs of your research. Dual ports allow for various combinations of crystallography and SAXS configurations. Your choice of VariMax™ confocal double-bounce optics for better spectral purity and beam size to match your sample types.
-
Faster, accurate data collection due to high-speed kappa goniometer, high-flux rotating anode X-ray source, fast, low-noise X-ray detector, and highly optimized instrument control software.
-
Improve your ability to investigate small samples due to the increased flux from the rotating anode X-ray source as well as the extreme low noise of the HyPix X-ray detectors. Noise-free images mean you can count longer for weakly diffracting crystals without a loss in data quality arising from detector noise.
-
Screen crystals in situ with optional XtalCheck crystallization plate screening device.
-
Enhance your ability to resolve large unit cells, twins or incommensurate lattices when you select the optional motorized variable beam slit in order to alter divergence to adapt the source to your sample’s requirements.
... Read More | The XtaLAB Synergy-i single crystal X-ray diffractometer includes a high-flux, low maintenance microfocus sealed tube X-ray instrument with a high precision 4-circle kappa goniometer and Rigaku’s own Hybrid Photon Counting (HPC) X-ray detector known as the HyPix-Bantam. The XtaLAB Synergy-i containsThe XtaLAB Synergy-i single crystal X-ray diffractometer includes a high-flux, low maintenance microfocus sealed tube X-ray instrument with a high precision 4-circle kappa goniometer and Rigaku’s own Hybrid Photon Counting (HPC) X-ray detector known as the HyPix-Bantam. The XtaLAB Synergy-i contains the latest technology and can be upgraded from a single source to a dual source instrument. The system can be equipped with Cu and/or Mo sources allowing for a broad range of sample types to be evaluated. The XtaLAB Synergy-i is controlled by the fully-integrated, user-inspired CrysAlisPro software package that is capable of collecting and processing data efficiently and accurately, so you achieve the best data possible.
The XtaLAB Synergy-i is a full-featured single crystal X-ray diffractometer that requires little servicing to maximize uptime and throughput. It is the ideal diffractometer for crystallography research laboratories.
Features:
- Up to 50 W microfocus X-ray tube with multilayer optics
- High precision 4-circle kappa goniometer
- State-of-the-art HPC technology detector, the HyPix-Bantam
- New cabinet design with controlled sample and cabinet lighting
- The system conforms to the most stringent of X-ray safety guidelines
- CrysAlisPro: Powerful, user-friendly software, comes standard with AutoChem3.0 for fully-automated structure solution and refinement
- Simple dual-source upgrade
... Read More |