Carver Auto Series Plus Presses from Carver Inc

Product Detail
ItemCarver Auto Series Plus Presses
CompanyCarver Inc
PriceGet Quote
Catalog Number3888 / 3889 / 3890 / 3891 / 3892 / 3893 / 3894 / 3895 / 4530 / 4531 / 4532 / 4533 / 5400 / 5401 / 5402 / 5403
QuantityEA
TypeTwo-column and four-column benchtop, floor standing, manual and automatic
Sample SizeInquire
ApplicationsQuality control, research and development, Pelletizing, lab testing, pharmaceuticals, liquid extraction, cell disruption, laminating, specimen preparation and other laboratory applications
Pressure Range12 to 100 Tons (depending on model)
Max. Pressure12 to 100 Tons (depending on model)
Platen Size6 x 6, 9 x 9, 12 x 12, 15 x 15 or 18 x 18 (depending on model)
DieInquire
DimensionsVaries with model

1569 Morris Street

P.O.Box 544

Wabash, IN 46992-0544

United States

Phone: (260) 563-7577

(1) Applying a Green Solvent with Microwave, Ultrasound, and Soxhlet Extraction Techniques to Quantify the Slip Additive cis-1,3-Docosenamide and Nine Oxidative Degradation Byproducts in Polypropylene SamplesPolymers (Basel)August 18, 2023Hernández Fernández Joaquin, Pérez Mendoza Jaime, Ortega-Toro Rodrigoextruder, a PP-Erucamide melt mix was produced. For each melt type, 20 g of melt was fed to a CARVER 3895 hot press (SPECTRA SERVICES, INC., NY 14519, EE.UU). In this CARVER machine, the samples were compressed

(2) Identifying, Quantifying, and Recovering a Sorbitol-Type Petrochemical Additive in Industrial Wastewater and Its Subsequent Application in a Polymeric Matrix as a Nucleating AgentMoleculesJune 23, 2023Joaquín Hernández-Fernández, Esneyder Puello-Polo, Edgar Marquezformed into films (300 mm diameter with 100 mm thickness) via compression molding in a hot press (CARVER 3895). After granulating the PP solid, recovered granules containing Millad NX 8000 is produced. To make

(3) Thermoplastic elastomers based on recycled high-density polyethylene/ground tire rubber/ethylene vinyl acetate: Effect of ground tire rubber regeneration on morphological and mechanical propertiesJournal of Thermoplastic Composite MaterialsJune 5, 2023Ali Fazli, Denis Rodriguepressing under a load of 3 tons using an automatic compression molding press (Carver, AutoFour/1512-PL,H, 3893, USA) with mold dimensions of 115 x 115 x 3 mm3. Characterization Contact angle measurements An

(4) Potentiality of sustainable corn starch-based biocomposites reinforced with cotton filter waste of spinning millHeliyonMay 1, 2023Md Masum Reza, Hosne Ara Begum, Ahmed Jalal Uddintechnique. Composites were then prepared by the hot press with a compression molding machine (Model- 3895 4NE1000, CARVER, USA). The inner walls of the mold were covered with Teflon-coated paper. The temperature

(5) A New Route of Valorization of Petrochemical Wastewater: Recovery of 1,3,5-Tris (4-tert-butyl-3-hydroxy-2,6-dimethyl benzyl)–1,3,5-triazine-2,4,6-(1H,3H,5H)-trione (Cyanox 1790) and Its Subsequent Application in a PP Matrix to Improve Its Thermal StabilityMoleculesFebruary 21, 2023Joaquín Hernández-Fernández, Rodrigo Ortega-Toro, Juan López-Martinezdiameter films with a thickness of about 100 mm) by compression molding in a hot press, the CARVER 3895. After the PP solid was granulated, 1000 mg/kg of recovered granules containing Cyanox 1790 were produced.

Auto Series Plus Automatic Laboratory Presses