Coal Ash Analysis Equipment

Coal ash analysis equipment is used to test and quantify numerous properties of coal and coke including ash yield, elemental composition, coal quality, coal ash cone deformation, coal combustion efficiency, and ash content in coal. Coal ash analysis equipment is used in numerous industries including environmental monitoring, power generation, and materials science, making coal ash analysis equipment essential for any coal testing lab. When comparing coal ash analysis equipment ensure that it can quantify the parameters appropriate for your coal analysis. Also ensure that the temperature range, data storage, and instrument sensitivity are appropriate for your coal analysis.
CompanyCarbolite GeroCarbolite GeroCarbolite GeroCarbolite GeroCarbolite Gero
ItemIOT Iron Ore TumblerAAF Standard Ashing FurnaceCDHT Coal Drying High Temperature OvenCSR Coke Strength after Reduction TumblerLTD Low Temperature Reduction Disintegration of Iron Ore
Catalog NumberIOTAAFCDHTCSRLTD
Price
DescriptionSingle Drum Iron Ore Tumbler, that meets standard BS ISO 4696-1:2015 'Iron ores for blast furnace feedstocks -- Determination of low temperature reduction-disintegration indices by static method'. It is applicable to lump ores, sinters and hot-bonded pellets.Coal Ashing Furnaces, with large floor area that allows for a large number of samples. Has wire heating elements that are protected from chemical and mechanical damage by a hard wearing alumina based liner. These elements are powerful and with graded winding to compensate for heat losses. Air inlet ... Read MoreCoal Drying high temperature ovens. Air is circulated around the oven by two centrifugal fans with air ducts and guides to ensure that the airflow is horizontal across the chamber. Air inlets and outlets vent out the moist air in the oven and replace it with fresh air. Comes with reliable and long ... Read MoreBuilt to measure the resistance of coke to degrade from the impact and abrasion during its descent into a blast furnace, in accordance with ASTM D5341/D5341M-17 and ISO 18894(2018).Low Temperature Reduction Furnace, for dynamic testing for low temperature reduction - disintegration of Iron Ore. Meets the International Standard BS ISO 13930:2015. Has easy access for loading and unloading the reduction barrel and a corrosion and oxidisation resistant Inconel retort. Also has a ... Read More
ApplicationsCoal and Coke Testing, Iron Ore and Steel TestingAshing, Loss on Ignition, Pyrolysis, Sterilising, Combustion, Calcination, Materials Testing, DebindingCoal and Coke Testing, Drying, Loss on DryingCoal and Coke TestingCoal and Coke Testing
Get Quote