Ultra pure water is water nearly or completely devoid of contaminants. Ultrapure water systems are an important component for laboratories across markets including manufacturing and the semi-conductor industry. These ultra pure water systems remove chemical contaminants through de-ionization (DI) and reverse osmosis. An ultra pure water system eliminates bacteria with UV radiation. These laboratory water purification systems can achieve up to 18.2 MOhm-cm in resistivity (high resistivity indicating low levels of anionic contamination) and can reduce organic carbon to less than 50 ppb. An ultrapure water system is equipped with ultra filters to remove endotoxins, DNase and Rnase left over from bacteria destroyed by UV, resulting in extremely low total organic carbon (TOC). Additional carbon filters in these laboratory water purification systems reduces the need for pre-treatment, permitting tap water as a source.
Find, compare, and request a quote for ultrapure water systems across leading suppliers at Labcompare; including access to product citations, related published figures, and first-hand reviews from our scientific community.
Get Quote for All
Select up to 5 products from below to compare or request more information.
Purite Ltd
- Purified water make-up flowrate: 200 l/hr @ 10°C; distribution up to 2 m³/hr at a maximum of 90 psi (6.2 bar). Storage options: 350, 500, or 1000 litres.
- Up to 15 MO·cm
- < 500 ppb as C
Purite Ltd
- Purified water make-up: 120 or 190 L/hr (at 10°C); distribution: up to 270 L/hr at max 3 bar; minimum feed flow: 400 L/hr
- < 30 µS/cm to 18.2 MO·cm (with optional deionisation cylinder)
- < 30 ppb
Purite Ltd
- 200–600 l/hr purified water make-up (at 10°C); up to 3000 l/hr distribution; 250-litre integral stainless steel storage tank
- Conductivity <30 µS/cm (base RO); optional polishing DI packs available for 10, 15, or 18 MO·cm output
- <50 ppb (typical, depends on feedwater); TOC reduction optional via activated carbon DI packs
Purite Ltd
- Up to 2.0 L/min dispense flow rate
- Up to 18.2 MO.cm
- < 1 ppb
Stakpure GmbH
- 20 l/h (OmniaLabDS20), 40 l/h (OmniaLabDS40), 60 l/h (OmniaLabDS60) at 15°C
- 10 up to 1 MO·cm
- < 2 ppm (feed water requirement)
Stakpure GmbH
- 20–40 l/h (OmniaLabED 20: 20 l/h; OmniaLabED 40: 40 l/h) at 15 °C
- 1–10 MO·cm (Conductivity: 0.1–1 µS/cm)
- < 30 ppb (depending on feed water quality)
Stakpure GmbH
- 20 L/h or 40 L/h (Type II pure water); up to 2 L/min dispenser (Type I ultrapure water); 100 L/h at 2 bar pressurized tank outlet
- 18.2 MO·cm (Type I); 10 MO·cm down to 1 MO·cm (Type II conductivity 0.1–1 µS/cm)
- < 10 ppb (standard models); < 5 ppb (UV-TOC monitoring models)
Stakpure GmbH
- 20 L/h (OmniaLabRO 20); 40 L/h (OmniaLabRO 40); 60 L/h (OmniaLabRO 60) — all at 15°C
- Inquire
- Feedwater requirement: TOC < 2 ppm; no output TOC value specified for product water
Stakpure GmbH
- 20 l/h (OmniaLabUP 20) or 40 l/h (OmniaLabUP 40) at 15°C
- 10 to 15 MO·cm
- Inquire
Stakpure GmbH
- Up to 2 L/min
- 18.2 MO·cm at 25 °C
- <10 ppb (standard); <5 ppb (UV variant)
Stakpure GmbH
- Up to 2 L/min; individually adjustable dispensing volume 0.05 up to 25 liters
- 18.2 MO·cm at 25 °C (both UV-TOC and UV-TOC/UF variants)
- < 2 ppb (UV-TOC variant); < 5 ppb (UV-TOC/UF variant)
Stakpure GmbH
- 12 or 20 L/h (Type II pure water at 15°C); up to 2 L/min dispensing performance (Type I ultrapure water)
- Type I: 18.2 MO·cm at 25°C; Type II: 15 down to 10 MO·cm at 25°C
- Type I ultrapure water: <5 ppb (UV-TOC and UV-TOC/UF models); <10 ppb (base OmniaTap model). TOC monitor included on UV-TOC and UV-TOC/UF models only.
Stakpure GmbH
- 6 L/h (OmniaTap II 6/6 UV); 12 L/h (OmniaTap II 12/12 UV); 20 L/h (OmniaTap II 20/20 UV) — all at 15 °C
- 1–10 MO·cm (typical; varies with feed water quality)
- < 30 ppb (typical; varies with feed water quality)
Stakpure GmbH
- 5 l/h pure water (Type II); up to 2 l/min ultrapure water (Type I) dispensing performance
- 18.2 MO·cm at 25°C (Type I); 10–15 MO·cm at 25°C (Type II)
- < 10 ppb (Type I, standard model); < 5 ppb (Type I, UV model)
Stakpure GmbH
- 8 L/h (Type II pure water at 15°C); up to 2 L/min dispensing (Type I ultrapure water)
- 18.2 MO·cm at 25°C (Type I ultrapure water); 10–15 MO·cm at 25°C (Type II pure water)
- < 5 ppb (Type I ultrapure water, both models); real-time TOC monitoring included
Select up to 5 products from above to compare or request more information.
Tags:
Please Login or Register to Create Tags