| Description | OmniaTap xsbasic is a compact allrounder system that produces both Type I ultrapure water and Type II pure water from a single unit connected directly to tap water. It features a OneHand (OptiFillbasic) dispenser for push-button dispensing of Type I ultrapure water, and supports adaptable pure waterOmniaTap xsbasic is a compact allrounder system that produces both Type I ultrapure water and Type II pure water from a single unit connected directly to tap water. It features a OneHand (OptiFillbasic) dispenser for push-button dispensing of Type I ultrapure water, and supports adaptable pure water tanks (7, 30, or 60 liters) for continuous Type II laboratory water withdrawal. Available in two configurations: standard (xSbasic5) and UV-enhanced (xSbasic5 UV) with lower TOC output.... Read More | The OmniaLabDS is a CLRW/CLSI-grade pure water system designed for feeding clinical analyzers, steam sterilizers, and washer-disinfectors. Available in 20, 40, and 60 l/h output models, it features a 100 L pressurized tank with quality recirculation, regenerative polishing cartridges, a 0.2 µm The OmniaLabDS is a CLRW/CLSI-grade pure water system designed for feeding clinical analyzers, steam sterilizers, and washer-disinfectors. Available in 20, 40, and 60 l/h output models, it features a 100 L pressurized tank with quality recirculation, regenerative polishing cartridges, a 0.2 µm sterile filter, UV disinfection, and an optional emergency supply. Complies with DIN EN 285 and EN ISO 15883 international water standards.... Read More | OmniaLabED is the efficient solution when high-quality pure water type II is required for the complete laboratory supply. The system meets international water standards ASTM, ISO 3696, and CLRW (CLSI), and uses continuously self-regenerating electro-deionization for maximized economy. It holds 100 OmniaLabED is the efficient solution when high-quality pure water type II is required for the complete laboratory supply. The system meets international water standards ASTM, ISO 3696, and CLRW (CLSI), and uses continuously self-regenerating electro-deionization for maximized economy. It holds 100 liters of pure water in a storage tank with quality recirculation to supply autoclaves, laboratory dishwashers, and ultrapure water systems. Available in two output models: OmniaLabED 20 (20 l/h) and OmniaLabED 40 (40 l/h).... Read More | The OmniaLabRO is a reverse osmosis pure water system for constant large quantities of Type III (reverse osmosis) water. Used to supply autoclaves, laboratory dishwashers, humidifiers, and ultrapure water systems. Includes a 100-liter storage tank, OptiFill Dispenser, leakage sensor, and tank volumeThe OmniaLabRO is a reverse osmosis pure water system for constant large quantities of Type III (reverse osmosis) water. Used to supply autoclaves, laboratory dishwashers, humidifiers, and ultrapure water systems. Includes a 100-liter storage tank, OptiFill Dispenser, leakage sensor, and tank volume display. Available as OmniaLabRO 20, OmniaLabRO 40, and OmniaLabRO 60 (20, 40, 60 L/h at 15°C).... Read More | The OmniaTap xstouch (Blueline series) is an intelligent compact water purification system with intuitive touchscreen operation that simultaneously produces Type I ultrapure water and Type II pure water from a single unit connected directly to tap water. It combines RO, ion exchange, UV, TOC The OmniaTap xstouch (Blueline series) is an intelligent compact water purification system with intuitive touchscreen operation that simultaneously produces Type I ultrapure water and Type II pure water from a single unit connected directly to tap water. It combines RO, ion exchange, UV, TOC monitoring, and optional ultrafiltration. Available in two models: OmniaTap xstouch 8 UV-TOC and OmniaTap xstouch 8 UV-TOC/UF.... Read More |
| Method | Reverse osmosis with UV treatment; push-button digital dispenser control (OptiFillbasic OneHand dispenser); direct tap water feed connection | RO cartridge ? stainless steel regenerative polishing cartridge ? 0.2 µm sterile filter capsule ? UV disinfection; sterile overflow and sterile vent filter + CO2 absorber included; optional UV tank disinfection and emergency supply | Reverse Osmosis (RO) + Electro-Deionization (EDI) | Reverse Osmosis (RO) | Reverse osmosis (RO) + ion exchange + UV irradiation + TOC monitoring; UV-TOC/UF model additionally includes ultrafiltration (UF) for endotoxin, RNase, DNase, and protease removal |
| Output | 5 l/h pure water (Type II); up to 2 l/min ultrapure water (Type I) dispensing performance | 20 l/h (OmniaLabDS20), 40 l/h (OmniaLabDS40), 60 l/h (OmniaLabDS60) at 15°C | 20–40 l/h (OmniaLabED 20: 20 l/h; OmniaLabED 40: 40 l/h) at 15 °C | 20 L/h (OmniaLabRO 20); 40 L/h (OmniaLabRO 40); 60 L/h (OmniaLabRO 60) — all at 15°C | 8 L/h (Type II pure water at 15°C); up to 2 L/min dispensing (Type I ultrapure water) |
| Dimensions | 253 x 530 x 520 mm (W x H x D, with 7L docking tank) | Tower: 511 x 1520 x 575 mm (W x H x D); Base cabinet (tank): 511 x 800 x 575 mm (W x H x D) | Tower (W x H x D): 511 x 1520 x 575 mm; Base cabinet/tank (W x H x D): 511 x 800 x 575 mm | Tower (W x H x D): 511 x 1520 x 575 mm (with OptiFill Dispenser); Base cabinet/tank: 511 x 800 x 575 mm | Without tank (with OptiFill touch dispenser): 240 x 530 x 435 mm (W x H x D); With 7 L docking tank: 253 x 530 x 520 mm; Production unit without tank (under-table): 240 x 415 x 310 mm; OptiFill touch wall dispenser: 90 x 482 x 337 mm; OptiFill touch bench dispenser: 250 x 650 (750 with extension) x 380 mm |
| Total Organic Carbon (TOC) | < 10 ppb (Type I, standard model); < 5 ppb (Type I, UV model) | < 2 ppm (feed water requirement) | < 30 ppb (depending on feed water quality) | Feedwater requirement: TOC < 2 ppm; no output TOC value specified for product water | < 5 ppb (Type I ultrapure water, both models); real-time TOC monitoring included |