| Description | The PCE-ATP 1-KIT with 100 swabs included is used to quickly and easily check the cleanliness of surfaces. The Hygiene Tester displays a measurement result on the large LC display after only 10 seconds. The Hygiene Tester's internal memory stores up to 10,000 measured data sets with time and date. The PCE-ATP 1-KIT with 100 swabs included is used to quickly and easily check the cleanliness of surfaces. The Hygiene Tester displays a measurement result on the large LC display after only 10 seconds. The Hygiene Tester's internal memory stores up to 10,000 measured data sets with time and date. The PCE-ATP 1 with the associated PCE-ATP SwapPens, allows a quick detection of food or microbiological residues on all surfaces in contact with the product as an effectiveness test of cleaning and disinfection measures. Quantitative determination of intracellular and extracellular adenosine triphosphate (ATP) is performed in the portable PCE-ATP 1. The measured data from the Hygiene Tester can be stored and further processed after the measurement. The Hygiene Tester is used in the hygiene control in pharmacy, medicine, gastronomy, wholesalers and more.... Read More | The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc. The CO2 / carbon dioxide measuring device helps to ensure that, for example, there is regular ventilation for employees in the office. The CO2 / carbon dioxide The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc. The CO2 / carbon dioxide measuring device helps to ensure that, for example, there is regular ventilation for employees in the office. The CO2 / carbon dioxide measuring device checks indoor air quality via the CO2 content. If the CO2 concentration is below 1000 ppm, the indoor air quality is optimal. Good indoor air quality helps to promote concentration. It is also ensured that the aerosol concentration in the air is low, as the aerosols are repeatedly mixed with fresh air. The CO2 / carbon dioxide measuring device shows the air quality as a numerical measured value and as a traffic light indicator. At the push of a button, the CO2 content of the last five hours can be shown on the display. In addition to the CO2 measuring function, the CO2 / carbon dioxide measuring device is equipped with a sensor for temperature and humidity.... Read More | The Condition Monitoring is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of applicationThe Condition Monitoring is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The frequency weightings A, C and Z as well as the time weightings S (Slow), F (Fast) and I (Impulse) are supported in order to always ensure application-appropriate measurement behaviour.
The Condition Monitoring also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer. The internal 8 GB memory and optional SD cards with up to 64 GB provide sufficient storage capacity for extensive measurement campaigns. The high-resolution 4-inch TFT touch display ensures intuitive and convenient operation. Measured variables such as Lp, Lmax, Lmin, Leq, Lpeak, LN(1-99) and numerous other useful functions are displayed clearly and in detail, enabling professional detailed evaluation of the measurement results with this Condition Monitoring.
Its wide range of applications makes the Condition Monitoring the ideal solution for environmental noise monitoring, traffic noise analysis, noise exposure assessment, occupational health and safety monitoring and airport noise monitoring.
The software included in the scope of delivery extends the functionality considerably: it enables live data reception via Ethernet or WiFi, access to stored measurement data and the export of results as a PDF report or CSV file. In addition, the display of the measurement parameters can be freely configured within the software, allowing customisation to specific analysis requirements.... Read More | The Drain Camera is a versatile inspection system for precise visual inspection and 3D measurement in industrial applications. Equipped with a high-resolution image sensor and a 7-inch IPS touch display, the Drain Camera delivers detailed images and videos in real time. The 3D measurement function The Drain Camera is a versatile inspection system for precise visual inspection and 3D measurement in industrial applications. Equipped with a high-resolution image sensor and a 7-inch IPS touch display, the Drain Camera delivers detailed images and videos in real time. The 3D measurement function enables various measurement methods such as linear distances, areas, circumferences and sections directly on the object. The Drain Camera offers an image resolution of 1280 × 720 pixels and a standard accuracy of 0.1 mm, with a minimum accuracy of 0.01 mm. The brightness of the LED lighting is adjustable in 5 levels and reaches up to 50,000 lx. The Drain Camera supports image and video recording in JPG and MP4 format as well as the creation of PDF test reports directly on the device. The picture-in-picture function, dual camera preview and image rotation allow for flexible inspections. Operation is convenient via an electric joystick and the touch display. An internal 16 GB flash memory and an SD card with up to 128 GB are available for data storage. Interfaces such as HDMI, USB-A and USB-C enable easy export and display of data on external devices. The Drain Camera is suitable for applications in aerospace, automotive engineering, energy supply, special inspections, industrial manufacturing and maintenance.... Read More | The Voltmeter is a practical and versatile meter that can be used in many areas such as electronics, electrical engineering and DIY. The Voltmeter enables the measurement of DC and AC voltage, resistance, capacitance, frequency and temperature. With True RMS technology, it can also accurately The Voltmeter is a practical and versatile meter that can be used in many areas such as electronics, electrical engineering and DIY. The Voltmeter enables the measurement of DC and AC voltage, resistance, capacitance, frequency and temperature. With True RMS technology, it can also accurately measure complex AC voltages.
The live test function indicates whether a circuit is energised using only a test tip. The NCV (Non-Contact Voltage) function helps to detect live wires without direct contact. The Voltmeter also offers a diode test which can be used to check the functionality of diodes, as well as a continuity test. The multimeter is barely thicker than a smartphone, making it easy to transport and store.
The Voltmeter is powered by a rechargeable lithium battery that boasts a long service life and reliable performance. It has an automatic power-off function after 10 minutes to extend battery life. Thanks to its compact design, the device is easy to transport and can be used in hard-to-reach areas. The 3.3-inch LC display ensures clear and easy-to-read values, while the integrated torch is useful in dark environments.... Read More |