| Description | The PCE-ATP 1-KIT with 100 swabs included is used to quickly and easily check the cleanliness of surfaces. The Hygiene Tester displays a measurement result on the large LC display after only 10 seconds. The Hygiene Tester's internal memory stores up to 10,000 measured data sets with time and date. The PCE-ATP 1-KIT with 100 swabs included is used to quickly and easily check the cleanliness of surfaces. The Hygiene Tester displays a measurement result on the large LC display after only 10 seconds. The Hygiene Tester's internal memory stores up to 10,000 measured data sets with time and date. The PCE-ATP 1 with the associated PCE-ATP SwapPens, allows a quick detection of food or microbiological residues on all surfaces in contact with the product as an effectiveness test of cleaning and disinfection measures. Quantitative determination of intracellular and extracellular adenosine triphosphate (ATP) is performed in the portable PCE-ATP 1. The measured data from the Hygiene Tester can be stored and further processed after the measurement. The Hygiene Tester is used in the hygiene control in pharmacy, medicine, gastronomy, wholesalers and more.... Read More | This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / Breathalyzer reliably measures the alcohol content in your breath.
With a measuring range of 0.00 to 0.400% BAC and a fine resolution of 0.001% BAC, the Alcohol meter / Breathalyzer delivers precise results in just a few seconds. An integrated voice output guides you step by step through the measurement. The result appears clearly legible on the LCD display, accompanied by a practical traffic light system: green: below 0.020% BAC, yellow: 0.020% - 0.080% BAC and red: from 0.080% BAC.
If a limit value is exceeded, an additional acoustic warning signal sounds. After a high measurement, the Alcohol meter / Breathalyzer automatically performs a short reset. The device has an internal memory for up to 100 measured values so that past results can be easily tracked.
The compact Alcohol meter / Breathalyzer is conveniently charged via USB-C cable and switches off automatically after around two minutes to save energy. Thanks to its simple operation, precise technology and user-friendly features, this Alcohol meter / Breathalyzer is the ideal tool for independent alcohol testing - whether at home, on the road or at work.... Read More | Our robust socket square inserts are specially designed for use with impact wrenches and are ideal for demanding bolting applications. The range covers thread sizes from M16 to M48 and offers the right wrench sizes for a wide variety of applications.
These high-quality socket square inserts impress Our robust socket square inserts are specially designed for use with impact wrenches and are ideal for demanding bolting applications. The range covers thread sizes from M16 to M48 and offers the right wrench sizes for a wide variety of applications.
These high-quality socket square inserts impress with their high load-bearing capacity, precise fit, and long service life – perfect for professional use in industry and assembly.... Read More | The cordless Soldering iron / Soldering device with 8 watts of power impresses with its fast heat-up time of approx. 20 seconds and reaches temperatures of up to 480°C/896°F - ideal for precise soldering work on the go or in hard-to-reach places. Thanks to its ergonomic design, the The cordless Soldering iron / Soldering device with 8 watts of power impresses with its fast heat-up time of approx. 20 seconds and reaches temperatures of up to 480°C/896°F - ideal for precise soldering work on the go or in hard-to-reach places. Thanks to its ergonomic design, the cordless Soldering iron / Soldering device iron sits comfortably in the hand and allows you to work comfortably.
With an operating time of approx. 1 hour and a powerful 1800 mAh lithium battery, the cordless Soldering iron / Soldering device is the perfect companion for mobile applications. The integrated battery level indicator ensures that the charge status is always visible. Two integrated LEDs also ensure optimum illumination of the soldering point. The charging time is only around 1.5 hours - so the cordless soldering iron is quickly ready for use again.
... Read More | Thickness Gauge with the unique swivelling probe / Easy measurements in hard-to-reach areas / For FE and nFE metals / Wireless interface for Windows, iOS and Android
The Thickness Gauge has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out Thickness Gauge with the unique swivelling probe / Easy measurements in hard-to-reach areas / For FE and nFE metals / Wireless interface for Windows, iOS and Android
The Thickness Gauge has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Thickness Gauge with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places. The handy metal housing is splash-proof to IP 64 for interference-free measurements in harsh environments. A coating thickness tester with flowing water protection is also available as an option. For a long service life with frequent measurements on rough surfaces, the measuring probe has a wear-resistant ruby probe pole.
With a single button and the self-explanatory, multilingual menu navigation, the Thickness Gauge is very easy to operate.
A Thickness Gauge is usually used in the quality assurance of coating processes. For example, to determine the paint thickness of a coating, when testing vehicles or steel structures or in fire protection (determining the coating thickness of steel doors). However, it is not only a Thickness Gauge, but can also be used to reliably measure rubber coatings, anodizing and galvanic coatings.
The Thickness Gauge uses a combined probe to measure insulating layers of paint, varnish, plastic, rubber, ceramic and galvanic coatings (excluding nickel) using the magnetic induction measuring method. The device is used on iron and steel substrates. It is also suitable for measuring insulating coatings (paint, plastic, etc.) using the eddy current method on non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic stainless steels in accordance with ISO 2178 and ISO 2360.
To further process your measurement data, you can connect your Thickness Gauge to mobile Android and iOS devices. Or you can communicate with a Windows PC. Wireless technology makes it possible. With the Lima Connect app, you can manage projects and allocate the measuring points on a photo. The measurement results can be statistically analysed and displayed graphically. The app for Android, iOS and Windows is free of charge.... Read More |