| Description | The illuminometer has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the illuminometer can be positioned appropriately for every measuring task.
- Measuring range: 0,0 … 400,000 Lux
-
Resolution: 0.1 lux
-
The illuminometer has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the illuminometer can be positioned appropriately for every measuring task.
- Measuring range: 0,0 … 400,000 Lux
-
Resolution: 0.1 lux
-
Lux and footcandle units
-
Micro-USB interface
-
Incl. software
-
Rechargeable battery
-
Data memory: 32,000 sets of readings
... Read More | The CO2 measuring device PCE-CMM 10 is a multi-function measuring device for measuring the air quality. This CO2 meter measures synchronously the CO2 concentration, the air temperature and the humidity. In addition, the CO2 meter has permanently programmed alarm limits. As soon as the currently The CO2 measuring device PCE-CMM 10 is a multi-function measuring device for measuring the air quality. This CO2 meter measures synchronously the CO2 concentration, the air temperature and the humidity. In addition, the CO2 meter has permanently programmed alarm limits. As soon as the currently measured CO2 measured value exceeds the alarm limit, the alarm is activated. The user is alerted to the CO2 meter by an audible and visual signal.
Using the built-in USB interface, you can continuously charge the CO2 meter to your PC workstation, for example. Thanks to the small blue shape, you can optimally position the CO2 meter at your workplace. Due to the 3 inch display and the strong backlight, you can read the measured values ??optimally.... Read More | The Environmental Meter is a versatile multiple gas detector for simultaneous monitoring of up to four gases, including combustible gases (Ex), oxygen (O?), carbon monoxide (CO) and hydrogen sulfide (H?S). Thanks to modern electrochemical and catalytic sensors, the Environmental Meter ensures high The Environmental Meter is a versatile multiple gas detector for simultaneous monitoring of up to four gases, including combustible gases (Ex), oxygen (O?), carbon monoxide (CO) and hydrogen sulfide (H?S). Thanks to modern electrochemical and catalytic sensors, the Environmental Meter ensures high measurement accuracy of ? ±5% of the final value and delivers reliable results even under demanding environmental conditions. The Environmental Meter has an easy-to-read LCD display with backlighting that clearly shows real-time measurements, system status, date, time and battery level. If the preset alarm limits are exceeded, the device immediately warns the user with visual, audible and vibration alarms. The alarm parameters – including low and high thresholds as well as STEL and TWA limits – can be individually adjusted to meet specific operational requirements and legal specifications.
In addition to classic measurement mode, the Environmental Meter offers extensive additional functions such as self-test, zero and multi-point calibration, and an internal memory for alarm and measurement events. This also makes it suitable for documenting occupational safety measures and for test reports. The intuitive menu navigation via an ergonomic keypad allows for easy operation even when wearing protective gloves.
The integrated Li-ion battery provides up to 8 hours of operation and can be quickly recharged. The robust housing made of impact-resistant plastic with non-slip rubber coating is dustproof and waterproof in accordance with IP66 and designed for harsh industrial environments. In addition, the Environmental Meter meets the requirements of explosion protection class Ex ib IIB T3 Gb and is therefore suitable for use in potentially explosive atmospheres.
Thanks to its compact design and low weight, the Environmental Meter can be conveniently worn on a belt or work clothing. It is ideal for mobile use during maintenance work, in confined spaces (e.g. containers or shafts), during inspection rounds and in emergency and rescue operations.
Typical areas of application for the Environmental Meter include industry, mining, sewage treatment plants, energy suppliers, chemical and petrochemical production, waste management, utility companies, fire brigades and technical emergency services. Wherever hazardous or explosive gas atmospheres may occur, the Environmental Meter offers reliable protection for employees and equipment and contributes significantly to compliance with occupational health and safety regulations.... Read More | The Health & Safety is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. It is used to reliably determine whether a material is conductive, static dissipative or insulating, thus making The Health & Safety is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. It is used to reliably determine whether a material is conductive, static dissipative or insulating, thus making a decisive contribution to the prevention of electrostatic discharge. Thanks to its compact design and ease of use, the device is ideal for both mobile use and stationary measurements and also serves as an ESD measuring device and electrostatic measuring device. Our measuring device covers a wide measuring range from 10³ ? to 10¹? ? and offers a measuring accuracy of 1 decade. The maximum display value is 20 G?; values above this indicate that the measuring range has been exceeded. The temperature measuring range is 0 ... 50°C / 32 °F ... 122°F with a deviation of ±2°C / ±3.6°F. An automatic switch-off after approximately five minutes ensures energy-saving operation, while the integrated backlight and data hold function allow for convenient reading of the measured values.
This Health & Safety has an easy-to-read 2.2-inch LCD display showing temperature, resistance, battery status and measurement mode. Three easy-to-use buttons control all functions, such as power on/off, temperature unit switching and data hold. Power is supplied by a 9 V block battery, allowing the Health & Safety to be operated independently of the mains. The Health & Safety also allows measurements to be taken on irregularly shaped objects and provides a clear evaluation of the measurement results: Values from 10³ to 10? ? indicate conductive materials, 10? to 10¹¹ ? indicate static dissipative properties, and from 10¹² ? onwards, surfaces are considered insulating. The device thus provides a quick and precise assessment of electrostatic properties and ensures greater safety and quality in sensitive production environments.
This measuring device is ideal for specialists in electronics manufacturing, ESD officers, technicians, engineers, testing laboratories and anyone who needs to check surfaces for electrical conductivity. As an ESD measuring device and electrostatic measuring device, it also provides reliable support in complying with electrostatic protection measures.... Read More | The Material Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read backlit display that provides clear values even in poor lighting conditions.
To assist the user, the Material Tester emits both an acoustic signal and an LED The Material Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read backlit display that provides clear values even in poor lighting conditions.
To assist the user, the Material Tester emits both an acoustic signal and an LED display as soon as the preset torque value is reached. Four different units of measurement (Nm, kgf-cm, lbf-ft, lbf-in) and three measuring modes - real time, peak value and preset - make it flexible to use. Automatic switch-off after a few minutes saves the batteries, and up to 999 measured values can be stored in the internal memory. The stored values can only be called up on the device.
The Material Tester is equipped with a fine-toothed ratchet head, which enables precise work even with a small radius of movement. Thanks to its robust construction made of metal and resistant plastic, it is durable and suitable for regular use. Our Material Testers are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industry. They are used to tighten bolts and nuts to a precisely defined torque in order to connect components securely and function properly without damaging them. The Material Tester is supplied in a plastic case with 2 AAA batteries.... Read More |