| Description | Geiger Counter / Measurement of beta, gamma and X-rays / Adjustable limit values / Progression diagram / Minimum, maximum and average values / Internal memory with PC transfer via software
The Geiger Counter is a portable device mainly used for monitoring X, ? and ß radiation. The Geiger Counter isGeiger Counter / Measurement of beta, gamma and X-rays / Adjustable limit values / Progression diagram / Minimum, maximum and average values / Internal memory with PC transfer via software
The Geiger Counter is a portable device mainly used for monitoring X, ? and ß radiation. The Geiger Counter is equipped with a glass Geiger-Müller counter tube (GM tube), which is known for its high measurement accuracy and sensitivity, and has a 2.4-inch TFT LCD display.
The Geiger Counter offers audible, visual and vibration alarms with customizable dose rate and total dose limits. It enables simultaneous real-time measurement of the dose rate and recording of the cumulative dose over a set period of time. In addition, the device displays the minimum, maximum and average values of the measurements.
The supplied software enables live measurement and data transfer from the internal memory. Thanks to its compact design, energy efficiency and versatility, the Geiger Counter is ideal for both professional and private use.... Read More | This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / Breathalyzer reliably measures the alcohol content in your breath.
With a measuring range of 0.00 to 0.400% BAC and a fine resolution of 0.001% BAC, the Alcohol meter / Breathalyzer delivers precise results in just a few seconds. An integrated voice output guides you step by step through the measurement. The result appears clearly legible on the LCD display, accompanied by a practical traffic light system: green: below 0.020% BAC, yellow: 0.020% - 0.080% BAC and red: from 0.080% BAC.
If a limit value is exceeded, an additional acoustic warning signal sounds. After a high measurement, the Alcohol meter / Breathalyzer automatically performs a short reset. The device has an internal memory for up to 100 measured values so that past results can be easily tracked.
The compact Alcohol meter / Breathalyzer is conveniently charged via USB-C cable and switches off automatically after around two minutes to save energy. Thanks to its simple operation, precise technology and user-friendly features, this Alcohol meter / Breathalyzer is the ideal tool for independent alcohol testing - whether at home, on the road or at work.... Read More | Laboratory for liquids up to 5 litres / Stirring speed up to 1600 rpm / 1 stirring position / Stirring plate - acrylic glass / Compact
The Laboratory is a compact and powerful laboratory device for the efficient mixing of liquids. With an adjustable stirring speed of 200 to 1600 rpm, it is ideal Laboratory for liquids up to 5 litres / Stirring speed up to 1600 rpm / 1 stirring position / Stirring plate - acrylic glass / Compact
The Laboratory is a compact and powerful laboratory device for the efficient mixing of liquids. With an adjustable stirring speed of 200 to 1600 rpm, it is ideal for volumes of up to 5 liters. The robust stirring plate made of acrylic glass with dimensions of 173 × 180 mm provides a stable work surface.
The Laboratory is driven by a brushless motor, which guarantees particularly quiet and low-maintenance operation. The stirring rod supplied measures 8 mm in diameter and is 30 mm long - ideal for a wide range of everyday laboratory applications. With a power consumption of just 10 watts, the Laboratory is also extremely energy-efficient. Power is supplied flexibly via 100 to 240V AC at 50/60 Hz.
Typical areas of application are chemical and biological laboratories, research facilities and industrial processes where reliable and uniform mixing is required.... Read More | The Material Tester is a high-quality measuring instrument designed for calibrating torque sensors and for the precise measurement of the tightening torque of screws and other fasteners. The Material Tester offers a high accuracy of ±1% within the range of 10% ... 100% of the scale and can be The Material Tester is a high-quality measuring instrument designed for calibrating torque sensors and for the precise measurement of the tightening torque of screws and other fasteners. The Material Tester offers a high accuracy of ±1% within the range of 10% ... 100% of the scale and can be operated in both clockwise and anti-clockwise directions.
The Material Tester supports several operating modes such as Peak Hold, MAX, and real-time measurement. In Peak Hold mode, the maximum value is automatically stored, and the measurement data can be transferred via USB to the software, which also enables a pass/fail evaluation. Tolerance ranges can be set directly on the device, allowing values to be checked quickly. An integrated LED traffic light display shows the measured value at a glance.
The choice between the units Newton-meter (N·m), kilogram-force-centimeter (kgf·cm), and pound-force-inch (lbf·in) enables flexible applications across various industries. With a storage capacity of 2,000 measurement groups and the option of data transfer via USB, the measuring instrument is ideal for use in the mechanical engineering industry and in scientific research facilities.
The Material Tester operates reliably at ambient temperatures of 5 to 40°C / 41 … 104°F and is powered by a 7.2V NiMH battery, which is optimized for mobile use.... Read More | This innovative 3-in-1 Oscilloscope is the perfect combination of a powerful Oscilloscope, a versatile multimeter and a signal generator. It has been specially developed for electronics technicians, engineers and hobby users who are looking for a compact, versatile and user-friendly device to carry This innovative 3-in-1 Oscilloscope is the perfect combination of a powerful Oscilloscope, a versatile multimeter and a signal generator. It has been specially developed for electronics technicians, engineers and hobby users who are looking for a compact, versatile and user-friendly device to carry out their measurement tasks efficiently.
The 2-channel Oscilloscope offers a bandwidth of 10 MHz and a sampling rate of 50 MS/s, which enables signals to be reliably recorded and analysed. Whether troubleshooting circuits, observing waveforms or analysing transients, this Oscilloscope delivers clear and precise results. Thanks to its high resolution and simple operation, even complex signal curves can be easily visualised. The Oscilloscope image can be saved to the internal memory as a screenshot and transferred to a computer via the USB-C interface.
The device also has extensive multimeter functions that cover a wide range of measurements. These include voltage measurements (DC and AC voltage), current measurements (DC and AC current), resistance measurements, capacitance measurements and diode test. Another practical feature is the integrated non-contact voltage detection, which allows you to reliably detect live wires.
The signal generator ideally complements the device by generating signals within a range of 1 Hz to 2 MHz. It supports various signal shapes such as sine, square, triangle, half wave, full wave, noise and DC signals. This function makes the Oscilloscope particularly useful for tests, simulations and the development of circuits. Thanks to its compact design and the combination of Oscilloscope, multimeter and signal generator, this device is an indispensable tool for anyone who values efficiency and precision when working with electronics.... Read More |