| Description | Radiation Detector for indoor use / E-paper display 1.54 inch / Short-term and long-term average / Colorful radon value display
The Radiation Detector is a compact and handy measuring device for precise monitoring of the radon concentration indoors. With a measuring range of 0 ... 9999 Bq/m³ and a Radiation Detector for indoor use / E-paper display 1.54 inch / Short-term and long-term average / Colorful radon value display
The Radiation Detector is a compact and handy measuring device for precise monitoring of the radon concentration indoors. With a measuring range of 0 ... 9999 Bq/m³ and a semiconductor detector, the Radiation Detector provides reliable measured values after just one hour. It provides both short-term average values (updated hourly) and long-term average values (updated every 24 hours up to 1 year) for a detailed analysis of radon exposure. These values are stored in the device and updated regularly. After a battery change or by pressing the reset button, all stored data is deleted and the monitor is reset to the original measured value.
The e-paper display shows the values in Bq/m³ or pCi/L, depending on the selected unit, which can be set by the user. The device has an audible and visual alarm with colour coding: Green for values below 100 Bq/m³ (safe), yellow for values between 100 and 150 Bq/m³ (low exposure) and red for values above 150 Bq/m³ (high exposure).
With its dimensions of 103 x 103 x 33 mm, the Radiation Detector is particularly compact and can be set up or hung up. It is powered by AAA batteries and is therefore mobile and flexible in use. This makes the Radiation Detector ideal for use in residential, office, school and industrial buildings for fast and reliable monitoring of radon levels.... Read More | The Condition Monitoring is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of applicationThe Condition Monitoring is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The frequency weightings A, C and Z as well as the time weightings S (Slow), F (Fast) and I (Impulse) are supported in order to always ensure application-appropriate measurement behaviour.
The Condition Monitoring also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer. The internal 8 GB memory and optional SD cards with up to 64 GB provide sufficient storage capacity for extensive measurement campaigns. The high-resolution 4-inch TFT touch display ensures intuitive and convenient operation. Measured variables such as Lp, Lmax, Lmin, Leq, Lpeak, LN(1-99) and numerous other useful functions are displayed clearly and in detail, enabling professional detailed evaluation of the measurement results with this Condition Monitoring.
Its wide range of applications makes the Condition Monitoring the ideal solution for environmental noise monitoring, traffic noise analysis, noise exposure assessment, occupational health and safety monitoring and airport noise monitoring.
The software included in the scope of delivery extends the functionality considerably: it enables live data reception via Ethernet or WiFi, access to stored measurement data and the export of results as a PDF report or CSV file. In addition, the display of the measurement parameters can be freely configured within the software, allowing customisation to specific analysis requirements.... Read More | The Material Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read backlit display that provides clear values even in poor lighting conditions.
To assist the user, the Material Tester emits both an acoustic signal and an LED The Material Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read backlit display that provides clear values even in poor lighting conditions.
To assist the user, the Material Tester emits both an acoustic signal and an LED display as soon as the preset torque value is reached. Four different units of measurement (Nm, kgf-cm, lbf-ft, lbf-in) and three measuring modes - real time, peak value and preset - make it flexible to use. Automatic switch-off after a few minutes saves the batteries, and up to 999 measured values can be stored in the internal memory. The stored values can only be called up on the device.
The Material Tester is equipped with a fine-toothed ratchet head, which enables precise work even with a small radius of movement. Thanks to its robust construction made of metal and resistant plastic, it is durable and suitable for regular use. Our Material Testers are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industry. They are used to tighten bolts and nuts to a precisely defined torque in order to connect components securely and function properly without damaging them. The Material Tester is supplied in a plastic case with 2 AAA batteries.... Read More | The Soldering iron / Soldering device is the perfect tool for fine soldering work and quick repairs. With an adjustable temperature range of 100 to 450°C / 212 … 842°F and an impressive heat-up time of less than 5 seconds, it allows you to work quickly and efficiently. Thanks to its The Soldering iron / Soldering device is the perfect tool for fine soldering work and quick repairs. With an adjustable temperature range of 100 to 450°C / 212 … 842°F and an impressive heat-up time of less than 5 seconds, it allows you to work quickly and efficiently. Thanks to its ergonomic design, the Soldering iron / Soldering device sits comfortably in the hand and enables precise handling.
Six interchangeable soldering tips are included in the scope of delivery, allowing you to react flexibly to different requirements. The Soldering iron / Soldering device also has practical functions such as an adjustable sleep and standby mode, which increases energy efficiency and extends the service life of the device. The soldering iron has a sleep function that activates after an adjustable time of 30 seconds to 60 minutes and maintains a definable temperature. In addition, standby mode offers the option of switching the device off completely after 1 to 60 minutes and it is quickly ready for use again at the touch of a key. After use, the soldering iron can be safely stowed away thanks to a robust metal cap - even when hot.
Compact, versatile and safe: the Soldering iron / Soldering device is the ideal choice for professionals and hobby users who value quality and convenience. The soldering iron is supplied in a practical tool bag with extensive accessories and a 100 W mains adaptor.... Read More | The Sound Sensor is ideal for all applications where ambient noise or noise levels need to be monitored precisely. Whether in urban noise measurement stations, on factory floors, in schools or in research projects - this Sound Sensor provides reliable measured values to fulfil safety and comfort The Sound Sensor is ideal for all applications where ambient noise or noise levels need to be monitored precisely. Whether in urban noise measurement stations, on factory floors, in schools or in research projects - this Sound Sensor provides reliable measured values to fulfil safety and comfort requirements. The sensor covers a measuring range of 30 ... 120 dBA and operates in the frequency range from 20 ... 12500 Hz. The resolution is typically 1 dB, which is sufficient for most practical applications, while the accuracy is ±2% of the measuring range plus ±0.5 dB, based on the reference tone of 94 dB at 1 kHz. The Sound Sensor therefore provides a precise and reliable basis for all acoustic measurements.
The specific technical features include a digital interface via RS-485 with Modbus RTU, which enables easy integration into existing systems. The sensor utilizes a high-quality condenser microphone with A-weighting, which takes into account the human sense of hearing. The response time is a maximum of 2 seconds. The Sound Sensor is suitable for wall mounting and has a weatherproof housing that is also designed for outdoor use. The device is particularly interesting for companies, authorities or research institutions that require continuous monitoring of noise sources, for example in production facilities, traffic controls or urban noise projects.... Read More |