| Description | UV Meter / UV Tester / Internal sensor / Hold function / Battery operation / Compact and lightweight / Automatic switch-off
The UV Meter / UV Tester is a compact measuring device for detecting UV-A radiation in the range of 300 ... 390 nm, with a peak wavelength of 365 nm. The UV Meter / UV Tester UV Meter / UV Tester / Internal sensor / Hold function / Battery operation / Compact and lightweight / Automatic switch-off
The UV Meter / UV Tester is a compact measuring device for detecting UV-A radiation in the range of 300 ... 390 nm, with a peak wavelength of 365 nm. The UV Meter / UV Tester measures radiation intensities from 0 ... 19,999 µW/cm2 with a resolution of 1 µW/cm2 and an accuracy of ± 4% FS. The measuring rate is one measurement per second, a hold function enables the current value to be recorded.
The UV Meter / UV Tester has an integrated sensor, an easy-to-read 1.4-inch LED display, a battery indicator and automatic switch-off after 4 minutes to save energy. It is powered by two 1.5V AA batteries, which makes mobile use particularly convenient.
The UV Meter / UV Tester is ideal for applications such as UV curing in industry, UV controls in medicine, occupational safety measurements and laboratory and environmental technology. The combination of integrated sensor, high accuracy and user-friendly design makes it a reliable tool for a wide range of professional requirements.... Read More | This Alcohol meter / Breathalyzer is ideal for personal use, for example for car drivers or people who want to regularly check their abilityto drive. With a measuring range of 0.01 ... 0.20 % BAC, the Alcohol meter / Breathalyzer delivers fast and precise results. The Alcohol meter / Breathalyzer This Alcohol meter / Breathalyzer is ideal for personal use, for example for car drivers or people who want to regularly check their abilityto drive. With a measuring range of 0.01 ... 0.20 % BAC, the Alcohol meter / Breathalyzer delivers fast and precise results. The Alcohol meter / Breathalyzer gives off a beeping sound at the beginning and end of the measurement. The Alcohol meter / Breathalyzer is very easy to use, after only about 10 seconds of blowing, the results are shown on the LC display, which shows the measured values in the corresponding colour of the traffic light display: Green means that the value is below 0.02 % BAC, yellow is displayed when the value exceeds 0.05 % BAC, and red appears when the value is 0.08 % BAC or more. In addition, you can hear a sound if the limit value is exceeded.
The Alcohol meter / Breathalyzer is compact and has a practical wrist strap. Our Alcohol meter / Breathalyzer is charged via USB-C cable and is equipped with an automatic switch-off after 2 minutes to protect the battery and ensure a longer service life. This Alcohol meter / Breathalyzer is therefore ideal for simply checking your ability to drive.... Read More | The Cable Detector is a portable testing device for diagnosing faults in network and coaxial cables and is used for the rapid inspection of structured cabling. The Cable Detector supports shielded and unshielded twisted-pair cables of categories Cat 3, Cat 5, Cat 5e, Cat 6, Cat 6A, Cat 7, Cat 7A, asThe Cable Detector is a portable testing device for diagnosing faults in network and coaxial cables and is used for the rapid inspection of structured cabling. The Cable Detector supports shielded and unshielded twisted-pair cables of categories Cat 3, Cat 5, Cat 5e, Cat 6, Cat 6A, Cat 7, Cat 7A, as well as coaxial cables, such as those used in TV, antenna, and surveillance systems.
Testing is carried out using a two-part system consisting of a main unit and a remote unit, which also allows permanently installed cables to be tested reliably. The most important test procedures include continuity testing of the conductors (pins 1–8), wiring testing to check the correct assignment of the wire pairs, and the detection of short circuits, wiring faults, and split-pair faults. In addition, the shielding of shielded cables is checked. The test range covers cable lengths of up to 305 m, whilst the minimum cable length for split-pair detection is approximately 0.5 m.
Our Cable Detector operates using test signals transmitted between the main unit and the remote unit. The results are displayed via LED indicators. Steady LEDs indicate correct wiring, whilst flashing LEDs indicate faults in the respective wire pairs. Additional status LEDs indicate the type of fault, such as short circuit, miswiring, reversal, or split pair.
The Cable Detector is used in network technology, building cabling, and in IT and communications installations, and is designed for electricians, network technicians, and service technicians to quickly test cable runs.... Read More | Thermometer for tabletop operation / Measures temperature, humidity and CO2 content of the air / CO2 measuring range from 0… 9999 ppm / Traffic light function / Touchscreen / USB supply
With the CO2 meter you can ensure the right climate in your office. In addition to the CO2 content of the air, Thermometer for tabletop operation / Measures temperature, humidity and CO2 content of the air / CO2 measuring range from 0… 9999 ppm / Traffic light function / Touchscreen / USB supply
With the CO2 meter you can ensure the right climate in your office. In addition to the CO2 content of the air, the CO2 meter measures the relative humidity and room temperature. The CO2 meter shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values ??from 20 … 95%. On the 3.5" display of the CO2 meter, the corresponding values can be read off directly, and the color of the CO2 display changes to provide an objective statement about the quality of the room air based on the CO2 content. This makes it particularly easy to assess the indoor air quality using the CO2 meter. For these reasons, the CO2 meter is particularly suitable for offices, schools, public buildings or hospitals, and in general for all buildings and rooms in which people are present.... Read More | Radiation Detector for indoor use / Long-term data storage / 2-inch LCD color display / Energy-saving mode / Real-time measurements
The compact Radiation Detector offers a precise and long-term stable solution for monitoring indoor radon concentrations. It is ideal for use in various environments Radiation Detector for indoor use / Long-term data storage / 2-inch LCD color display / Energy-saving mode / Real-time measurements
The compact Radiation Detector offers a precise and long-term stable solution for monitoring indoor radon concentrations. It is ideal for use in various environments such as living spaces, offices and laboratories. With a measuring range of 3.3 Bq/m³ ... 37 kBq/m³ and an accuracy of ± 15%, the Radiation Detector enables reliable measurement of the radon concentration. The integrated semiconductor radon sensor ensures high measurement accuracy. The measuring interval is 60 minutes and the data is saved every 6 hours, which enables long-term data storage of up to 504 days.
The Radiation Detector displays minimum, maximum and AVG values as well as cumulative average values and the values for 12, 24, 48 and 96 hours. It also offers an acoustic and visual alarm function, which can be set in the range from 100 ... 800 Bq/m³. The first measured values are displayed after 6 hours and a new data record is saved every 6 hours, whereby a maximum of 10 data records can be saved. The 2-inch LC colour display can be switched to standby mode to maximise the operating time of the Li-ion battery, which lasts up to 45 days when the display is switched off.
The Radiation Detector is used for continuous monitoring of indoor radon concentrations, for example in workplaces or public buildings. It is used for the early detection of increased radon levels in order to assess health risks and initiate suitable measures.... Read More |