| Description | Gas Detector / Gas Detection Instrument / Detects natural gas & LPG / Heat and gas sensor / WLAN / Voice announcement / Control via app / Real-time alarm / Easy installation
A Gas Detector / Gas Detection Instrument is an important safety device. It recognizes dangerous gas concentrations in the Gas Detector / Gas Detection Instrument / Detects natural gas & LPG / Heat and gas sensor / WLAN / Voice announcement / Control via app / Real-time alarm / Easy installation
A Gas Detector / Gas Detection Instrument is an important safety device. It recognizes dangerous gas concentrations in the air and sounds the alarm in good time to prevent accidents such as explosions or poisoning. Our Gas Detector / Gas Detection Instrument has been specially developed for use in homes, offices and similar indoor areas. It detects both natural gas (methane) and liquefied petroleum gas (LPG, consisting of propane and butane) and reacts as soon as a certain concentration is exceeded.
Our Gas Detector / Gas Detection Instrument measures gas concentrations in the range of 0 ... 100% of the lower explosion limit (LEL), whereby the alarm is triggered at 6% LEL. The response time is a maximum of 30 seconds and the alarm is triggered at a volume of over 70 decibels. A heat sensor is also integrated, which also triggers an alarm at an ambient temperature of 57°C / 134.6°F.
The detector is equipped with a color LCD display that shows the date and time as well as the gas values, the temperature and the remaining sensor life. A Wi-Fi connection is used to connect to the "Smart Life" app, which can be used to monitor the status of the device worldwide. In the event of an alarm, an acoustic and visual warning, a voice message and a push notification are sent to the smartphone. In addition, a connected valve can be activated automatically to stop the gas supply. The sensor has a service life of five years and the device requires a warm-up time of 180 seconds after switching on. The detector is supplied with 5V/1 A power via micro USB and consumes less than 200 mA.
The installation of the Gas Detector / Gas Detection Instrument depends on the type of gas used: for natural gas, which is lighter than air, the device is installed about 30 cm below the ceiling, for LPG, which is heavier than air, about 30 cm above the floor. The distance to the gas source should be 1.5 to 4 meters / 5 to 13 ft. The Gas Detector / Gas Detection Instrument can be attached either with screws or double-sided adhesive tape. Regular tests, which can also be carried out via the app or manually on the device, ensure that it is working properly.
Overall, the Gas Detector / Gas Detection Instrument offers a modern and reliable solution for the early detection of gas leaks and thus makes a significant contribution to increasing safety in rooms supplied with gas. This model of Gas Detector / Gas Detection Instrument combines modern technology with simple operation and is ideal for private and commercial applications.... Read More | The Force Gage is used to precisely check the tension of belts in machines and systems, thereby ensuring optimum power transmission. This Force Gage measures the oscillation frequency of the belt and immediately calculates the belt tension, which is displayed directly in newtons. The measuring rangeThe Force Gage is used to precisely check the tension of belts in machines and systems, thereby ensuring optimum power transmission. This Force Gage measures the oscillation frequency of the belt and immediately calculates the belt tension, which is displayed directly in newtons. The measuring range is between 10 and 680 Hz, with an accuracy of ±1 Hz for frequencies below 100 Hz and ±1% for frequencies above 100 Hz, with a total error of less than 5%.
Special features of the device include the flexible gooseneck sensor for hard-to-reach areas and the option to directly enter the belt length, belt mass and belt width (max. 999.9 mm), which makes the calculation of the belt tension particularly precise. The Force Gage can be switched between displaying the oscillation frequency in Hz and the calculated belt tension in N. It is powered by 3 × AA batteries, making it flexible to use.
This Force Gage is primarily used in the maintenance of conveyor systems, mechanical engineering, the automotive industry and wherever belts need to be tensioned precisely to ensure the performance, safety and service life of the equipment.... Read More | Laboratory Technology for liquids up to 5 l / Stirring speed up to 1600 rpm / Adjustable direction of rotation / Programme mode: up to 6 stirring programmes / 1 stirring position
The Laboratory Technology is an easy-to-use laboratory device that is used for the efficient mixing of liquids. With a 3Laboratory Technology for liquids up to 5 l / Stirring speed up to 1600 rpm / Adjustable direction of rotation / Programme mode: up to 6 stirring programmes / 1 stirring position
The Laboratory Technology is an easy-to-use laboratory device that is used for the efficient mixing of liquids. With a 3.7 inch LCD display and user-friendly controls, the stirring speed, stirring time and direction of rotation can be customized. The stirring speed can be set within a range of 100 ... 1,600 rpm and has an accuracy of ± 10 rpm.
Our Laboratory Technology automatically saves the last set working parameters and up to six individually programmed stirring cycles. This enables a quick restart with the desired settings. The stirrer also has an integrated timer that allows precise time control from one second to 99 hours and 59 minutes.
The use of a brushless motor ensures maintenance-free and quiet operation. The robust acrylic stirring plate measuring 173 × 180 mm provides a stable base for a wide range of stirring tasks, even for longer operating times. The Laboratory Technology can process liquid volumes up to a maximum of 5 litres and is operated via a power supply of AC 100 ... 240V at 50 Hz.
It is a good solution for laboratory work where reliable and reproducible mixing without heating is required. It impresses with its robust design and easy handling in research facilities and industrial laboratories.... Read More | The Material Tester is a high-precision testing device for calibrating and checking the function of torque spanners in industrial and technical applications. Developed for professional use, the tester enables the reliable measurement of torques of up to 50 Nm / 37 ft-lb and is therefore ideal for The Material Tester is a high-precision testing device for calibrating and checking the function of torque spanners in industrial and technical applications. Developed for professional use, the tester enables the reliable measurement of torques of up to 50 Nm / 37 ft-lb and is therefore ideal for use in the automotive industry, mechanical engineering and research and development.
With the option of switching between real-time and peak value mode, the Material Tester offers flexible handling and maximum control when analyzing measurement results. The limit value function warns on the display if defined values are exceeded or not reached, which increases safety and quality assurance in the work process with the Material Tester.
The measurement results are displayed in various units such as Nm, kgf cm or lbf in and can be saved internally. Up to 99 measured values can be stored in the device and called up as required. With a measuring accuracy of ±1%, the Material Tester guarantees reliable results even in demanding applications.
Different model variants of the Material Tester cover a wide range of torque ranges and offer a robust design and user-friendly operating interfaces. This makes the Material Tester the ideal solution for precise and efficient testing processes in a professional environment.
... Read More | A modern Thermometer is indispensable for continuously monitoring the air indoors and drawing attention to pollutants or poor air conditions in good time. Especially in living spaces, offices, schools, nurseries or workshops, clean air makes a decisive contribution to health and well-being. An air A modern Thermometer is indispensable for continuously monitoring the air indoors and drawing attention to pollutants or poor air conditions in good time. Especially in living spaces, offices, schools, nurseries or workshops, clean air makes a decisive contribution to health and well-being. An air quality detector also helps to permanently monitor indoor air quality in public facilities or production halls and to recognize potential hazards at an early stage.
Our innovative Thermometer records all the important parameters that are crucial for healthy indoor air. It measures TVOC (volatile organic compounds), PM1, PM2.5 and PM10 particulate matter, as well as temperature, humidity and CO? content. This gives you a comprehensive picture of the air composition and allows you to take targeted measures to improve indoor air quality.
The Thermometer has a clear 3.3-inch LC display that calculates and displays the air quality index (AQI) in addition to the current measured values. It also offers a clock and date display as well as automatic brightness adjustment for optimum readability. Thanks to its modern design, the device can be flexibly wall-mounted or free-standing. The integrated battery can be conveniently charged via USB-C cable.
A particularly practical feature is the traffic light display, which uses the colors green, yellow and red to provide an immediate warning when limit values are exceeded. In addition, a customizable acoustic alarm ensures safety. All settings can be made via the associated app and the measurement data can be transmitted in real time via WiFi and stored long-term. This allows you to keep an eye on your air values at all times and reliably analyze developments.
A Thermometer is ideal for families, businesses, educational institutions, nurseries, craft businesses and public facilities - wherever healthy air is crucial. With its compact size, modern design and versatile functionality, it is a valuable tool for reliably monitoring air quality and protecting health.
... Read More |