| Description | Gas Detector / Gas Detection Instrument / Detects natural gas & LPG / Heat and gas sensor / WLAN / Voice announcement / Control via app / Real-time alarm / Easy installation
A Gas Detector / Gas Detection Instrument is an important safety device. It recognizes dangerous gas concentrations in the Gas Detector / Gas Detection Instrument / Detects natural gas & LPG / Heat and gas sensor / WLAN / Voice announcement / Control via app / Real-time alarm / Easy installation
A Gas Detector / Gas Detection Instrument is an important safety device. It recognizes dangerous gas concentrations in the air and sounds the alarm in good time to prevent accidents such as explosions or poisoning. Our Gas Detector / Gas Detection Instrument has been specially developed for use in homes, offices and similar indoor areas. It detects both natural gas (methane) and liquefied petroleum gas (LPG, consisting of propane and butane) and reacts as soon as a certain concentration is exceeded.
Our Gas Detector / Gas Detection Instrument measures gas concentrations in the range of 0 ... 100% of the lower explosion limit (LEL), whereby the alarm is triggered at 6% LEL. The response time is a maximum of 30 seconds and the alarm is triggered at a volume of over 70 decibels. A heat sensor is also integrated, which also triggers an alarm at an ambient temperature of 57°C / 134.6°F.
The detector is equipped with a color LCD display that shows the date and time as well as the gas values, the temperature and the remaining sensor life. A Wi-Fi connection is used to connect to the "Smart Life" app, which can be used to monitor the status of the device worldwide. In the event of an alarm, an acoustic and visual warning, a voice message and a push notification are sent to the smartphone. In addition, a connected valve can be activated automatically to stop the gas supply. The sensor has a service life of five years and the device requires a warm-up time of 180 seconds after switching on. The detector is supplied with 5V/1 A power via micro USB and consumes less than 200 mA.
The installation of the Gas Detector / Gas Detection Instrument depends on the type of gas used: for natural gas, which is lighter than air, the device is installed about 30 cm below the ceiling, for LPG, which is heavier than air, about 30 cm above the floor. The distance to the gas source should be 1.5 to 4 meters / 5 to 13 ft. The Gas Detector / Gas Detection Instrument can be attached either with screws or double-sided adhesive tape. Regular tests, which can also be carried out via the app or manually on the device, ensure that it is working properly.
Overall, the Gas Detector / Gas Detection Instrument offers a modern and reliable solution for the early detection of gas leaks and thus makes a significant contribution to increasing safety in rooms supplied with gas. This model of Gas Detector / Gas Detection Instrument combines modern technology with simple operation and is ideal for private and commercial applications.... Read More | The Alcohol meter / Breathalyzer enables reliable measurement in the range of 0 ... 400 mg/100 ml with an accuracy of ±10 mg/100 ml. Measurement results are available in approx. 5 seconds and are clearly displayed on a 0.96 inch color LCD display. Various units are supported, including mg/l, mgThe Alcohol meter / Breathalyzer enables reliable measurement in the range of 0 ... 400 mg/100 ml with an accuracy of ±10 mg/100 ml. Measurement results are available in approx. 5 seconds and are clearly displayed on a 0.96 inch color LCD display. Various units are supported, including mg/l, mg/100ml, µg/100ml, mg/ml and g/100ml. The measurement results are displayed numerically and additionally supplemented by a colored traffic light display: green for values below 20 mg/100 ml, yellow for values between 20 and 80 mg/100 ml and red from 80 mg/100 ml. The measurement is carried out using a uniform breath sample with a puff duration of 2.5 seconds and an air flow of at least 20 liters per minute.
The breathalyser automatically saves the measurement results in the internal memory - including the date and time of each measurement. The integrated lithium battery is charged via a USB-C interface. The device is suitable for operation in a temperature range from -5°C to 40°C / 23 to 104°F. With a resolution of 0.001 mg/L and a repeatability of ±6%, the Alcohol meter / Breathalyzer offers precise and fast breath alcohol measurement.
Thanks to its compact design, dimensions and low weight, the Alcohol meter / Breathalyzer is particularly handy, easy to transport and ideal for mobile use. It is ideal for private use to check your own alcohol level before driving a vehicle. It is also used in companies to ensure the work ability and safety of employees, in security services to check staff and visitors and at events to ensure an alcohol-free environment. Thanks to the precise measurement results, the breathalyser effectively helps to prevent accidents and legal consequences caused by alcohol consumption.... Read More | The Health & Safety is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. It is used to reliably determine whether a material is conductive, static dissipative or insulating, thus making The Health & Safety is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. It is used to reliably determine whether a material is conductive, static dissipative or insulating, thus making a decisive contribution to the prevention of electrostatic discharge. Thanks to its compact design and ease of use, the device is ideal for both mobile use and stationary measurements and also serves as an ESD measuring device and electrostatic measuring device. Our measuring device covers a wide measuring range from 10³ ? to 10¹? ? and offers a measuring accuracy of 1 decade. The maximum display value is 20 G?; values above this indicate that the measuring range has been exceeded. The temperature measuring range is 0 ... 50°C / 32 °F ... 122°F with a deviation of ±2°C / ±3.6°F. An automatic switch-off after approximately five minutes ensures energy-saving operation, while the integrated backlight and data hold function allow for convenient reading of the measured values.
This Health & Safety has an easy-to-read 2.2-inch LCD display showing temperature, resistance, battery status and measurement mode. Three easy-to-use buttons control all functions, such as power on/off, temperature unit switching and data hold. Power is supplied by a 9 V block battery, allowing the Health & Safety to be operated independently of the mains. The Health & Safety also allows measurements to be taken on irregularly shaped objects and provides a clear evaluation of the measurement results: Values from 10³ to 10? ? indicate conductive materials, 10? to 10¹¹ ? indicate static dissipative properties, and from 10¹² ? onwards, surfaces are considered insulating. The device thus provides a quick and precise assessment of electrostatic properties and ensures greater safety and quality in sensitive production environments.
This measuring device is ideal for specialists in electronics manufacturing, ESD officers, technicians, engineers, testing laboratories and anyone who needs to check surfaces for electrical conductivity. As an ESD measuring device and electrostatic measuring device, it also provides reliable support in complying with electrostatic protection measures.... Read More | Portable 100 lpm aerosol hygiene monitoring device for airborne microbial, microbiological, bacterial, mold, fungi and virus analysis
PCE-AS1 is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms and food and beverage, Portable 100 lpm aerosol hygiene monitoring device for airborne microbial, microbiological, bacterial, mold, fungi and virus analysis
PCE-AS1 is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms and food and beverage, cosmetics and pharmaceutical production facilities, the PCE-AS1 air sampler meets the latest requirements for devices used for airborne microbial analysis. Optional ISO calibration lab certificate as an accessory.... Read More | The digital Torque Wrench combines state-of-the-art technology with a robust design and guarantees maximum precision for a wide range of assembly tasks. With its two intelligent operating modes, comprehensive protective functions and reliable 220V power supply, this Torque Wrench is the ideal The digital Torque Wrench combines state-of-the-art technology with a robust design and guarantees maximum precision for a wide range of assembly tasks. With its two intelligent operating modes, comprehensive protective functions and reliable 220V power supply, this Torque Wrench is the ideal solution for industrial, workshop and assembly applications.
In torque mode, the desired torque can be set quickly and continuously. The value can be conveniently adjusted using the operating buttons and the screwdriving process begins with a simple pull of the trigger. Torque + Angle Mode enables controlled tightening not only via the torque, but also via the angle of rotation - perfect for applications that require maximum precision.
Other highlights of the Torque Wrench include precise torque adjustment with high repeat accuracy, a multi-stage gearbox for reliable power transmission and alarm and control functions that help the user to assess the tightening result. Integrated protective functions such as temperature monitoring prevent overheating and extend the service life of the tool. Thanks to the mains-powered design, continuous work is possible without charging breaks.
Another highlight is the software supplied, which can be used to conveniently read out all the recorded screwdriving data. This allows users to document and analyze torque values, results and process data. The software also allows centralized settings to be made directly on the device.
The torque screwdriver is ideal for precise screw connections in mechanical and plant engineering. It also ensures reliable results when assembling wind turbines and steel structures. In the automotive sector, it is an indispensable tool for maintenance and repairs. It can also be used in a wide range of applications in heavy industry and construction.
... Read More |